m68knommu: factor some common ColdFire cpu reset code

A number of the early ColdFire cores use the same code to reset the CPU.
Currently that is duplicated in each of the sub-arch files. Pull out this
common code and use a single copy of it for all CPU types that use it.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

arch/m68k/platform/5206/config.c

@@ -19,17 +19,6 @@
 
 /***************************************************************************/
 
-void m5206_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #if defined(CONFIG_NETtel)
@@ -38,7 +27,6 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif /* CONFIG_NETtel */
 
-	mach_reset = m5206_cpu_reset;
 	mach_sched_init = hw_timer_init;
 
 	/* Only support the external interrupts on their primary level */

arch/m68k/platform/5249/config.c

@@ -83,21 +83,10 @@ static void __init m5249_smc91x_init(void)
 
 /***************************************************************************/
 
-void m5249_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = m5249_cpu_reset;
 	mach_sched_init = hw_timer_init;
+
 #ifdef CONFIG_M5249C3
 	m5249_smc91x_init();
 #endif

arch/m68k/platform/5307/config.c

@@ -28,17 +28,6 @@ unsigned char ledbank = 0xff;
 
 /***************************************************************************/
 
-void m5307_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #if defined(CONFIG_NETtel) || \
@@ -48,7 +37,6 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif
 
-	mach_reset = m5307_cpu_reset;
 	mach_sched_init = hw_timer_init;
 
 	/* Only support the external interrupts on their primary level */

arch/m68k/platform/5407/config.c

@@ -19,20 +19,8 @@
 
 /***************************************************************************/
 
-void m5407_cpu_reset(void)
-{
-	local_irq_disable();
-	/* set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = m5407_cpu_reset;
 	mach_sched_init = hw_timer_init;
 
 	/* Only support the external interrupts on their primary level */

arch/m68k/platform/coldfire/Makefile

@@ -15,17 +15,17 @@
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206)	+= timers.o intc.o
-obj-$(CONFIG_M5206e)	+= timers.o intc.o
+obj-$(CONFIG_M5206)	+= timers.o intc.o reset.o
+obj-$(CONFIG_M5206e)	+= timers.o intc.o reset.o
 obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
 obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o
-obj-$(CONFIG_M5249)	+= timers.o intc.o
+obj-$(CONFIG_M5249)	+= timers.o intc.o reset.o
 obj-$(CONFIG_M527x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5272)	+= timers.o
 obj-$(CONFIG_M528x)	+= pit.o intc-2.o
-obj-$(CONFIG_M5307)	+= timers.o intc.o
+obj-$(CONFIG_M5307)	+= timers.o intc.o reset.o
 obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
-obj-$(CONFIG_M5407)	+= timers.o intc.o
+obj-$(CONFIG_M5407)	+= timers.o intc.o reset.o
 obj-$(CONFIG_M54xx)	+= sltimers.o intc-2.o
 
 obj-y			+= pinmux.o gpio.o

arch/m68k/platform/coldfire/reset.c

+/*
+ * reset.c  -- common ColdFire SoC reset support
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+void mcf_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+static int __init mcf_setup_reset(void)
+{
+	mach_reset = mcf_cpu_reset;
+	return 0;
+}
+
+arch_initcall(mcf_setup_reset);