提交 d88d6b05 编写于 作者: S Steve Hodgson 提交者: Ben Hutchings

sfc: Siena: Disable write-combining when SR-IOV is enabled

If SR-IOV is enabled by firmware, even if it is not enabled in the PCI
capability, TX pushes using write-combining may be corrupted.

We want to know whether it is enabled before mapping the NIC
registers, and even if PCI extended capabilities are not accessible.
Therefore, we look for the MSI capability, which is removed if SR-IOV
is enabled.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
上级 736561a0
......@@ -1054,6 +1054,7 @@ static int efx_init_io(struct efx_nic *efx)
{
struct pci_dev *pci_dev = efx->pci_dev;
dma_addr_t dma_mask = efx->type->max_dma_mask;
bool use_wc;
int rc;
netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n");
......@@ -1104,8 +1105,21 @@ static int efx_init_io(struct efx_nic *efx)
rc = -EIO;
goto fail3;
}
efx->membase = ioremap_wc(efx->membase_phys,
efx->type->mem_map_size);
/* bug22643: If SR-IOV is enabled then tx push over a write combined
* mapping is unsafe. We need to disable write combining in this case.
* MSI is unsupported when SR-IOV is enabled, and the firmware will
* have removed the MSI capability. So write combining is safe if
* there is an MSI capability.
*/
use_wc = (!EFX_WORKAROUND_22643(efx) ||
pci_find_capability(pci_dev, PCI_CAP_ID_MSI));
if (use_wc)
efx->membase = ioremap_wc(efx->membase_phys,
efx->type->mem_map_size);
else
efx->membase = ioremap_nocache(efx->membase_phys,
efx->type->mem_map_size);
if (!efx->membase) {
netif_err(efx, probe, efx->net_dev,
"could not map memory BAR at %llx+%x\n",
......
......@@ -38,6 +38,8 @@
#define EFX_WORKAROUND_15783 EFX_WORKAROUND_ALWAYS
/* Legacy interrupt storm when interrupt fifo fills */
#define EFX_WORKAROUND_17213 EFX_WORKAROUND_SIENA
/* Write combining and sriov=enabled are incompatible */
#define EFX_WORKAROUND_22643 EFX_WORKAROUND_SIENA
/* Spurious parity errors in TSORT buffers */
#define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册