提交 d8764646 编写于 作者: M Markus Pargmann 提交者: Mark Brown

ASoC: fsl-ssi: Move ac97 specific setup to seperate function

This is a pure cleanup patch to increase code readability.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>
上级 6ce4eac1
......@@ -321,6 +321,36 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
return ret;
}
static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private)
{
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
/*
* Setup the clock control register
*/
write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
&ssi->stccr);
write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
&ssi->srccr);
/*
* Enable AC97 mode and startup the SSI
*/
write_ssi(CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV,
&ssi->sacnt);
write_ssi(0xff, &ssi->saccdis);
write_ssi(0x300, &ssi->saccen);
/*
* Enable SSI, Transmit and Receive. AC97 has to communicate with the
* codec before a stream is started.
*/
write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_SSIEN |
CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
write_ssi(CCSR_SSI_SOR_WAIT(3), &ssi->sor);
}
static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
{
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
......@@ -387,31 +417,8 @@ static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
* because it is also running without an active substream. Normally SSI
* is only enabled when there is a substream.
*/
if (ssi_private->imx_ac97) {
/*
* Setup the clock control register
*/
write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
&ssi->stccr);
write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
&ssi->srccr);
/*
* Enable AC97 mode and startup the SSI
*/
write_ssi(CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV,
&ssi->sacnt);
write_ssi(0xff, &ssi->saccdis);
write_ssi(0x300, &ssi->saccen);
/*
* Enable SSI, Transmit and Receive
*/
write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_SSIEN |
CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
write_ssi(CCSR_SSI_SOR_WAIT(3), &ssi->sor);
}
if (ssi_private->imx_ac97)
fsl_ssi_setup_ac97(ssi_private);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册