提交 d7fdd0e5 编写于 作者: S Sara Sharon 提交者: Luca Coelho

iwlwifi: pcie: poll RFH for RX DMA stop

Somehow we ended up stopping RX using legacy RX registers
even for devices that support RFH. Fix it.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
上级 34777b00
......@@ -344,6 +344,32 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl)
#define RFH_RBDBUF_RBD0_LSB 0xA08300
#define RFH_RBDBUF_RBD_LSB(q) (RFH_RBDBUF_RBD0_LSB + (q) * 8)
/**
* RFH Status Register
*
* Bit fields:
*
* Bit 29: RBD_FETCH_IDLE
* This status flag is set by the RFH when there is no active RBD fetch from
* DRAM.
* Once the RFH RBD controller starts fetching (or when there is a pending
* RBD read response from DRAM), this flag is immediately turned off.
*
* Bit 30: SRAM_DMA_IDLE
* This status flag is set by the RFH when there is no active transaction from
* SRAM to DRAM.
* Once the SRAM to DRAM DMA is active, this flag is immediately turned off.
*
* Bit 31: RXF_DMA_IDLE
* This status flag is set by the RFH when there is no active transaction from
* RXF to DRAM.
* Once the RXF-to-DRAM DMA is active, this flag is immediately turned off.
*/
#define RFH_GEN_STATUS 0xA09808
#define RBD_FETCH_IDLE BIT(29)
#define SRAM_DMA_IDLE BIT(30)
#define RXF_DMA_IDLE BIT(31)
/* DMA configuration */
#define RFH_RXF_DMA_CFG 0xA09820
/* RB size */
......
......@@ -173,9 +173,16 @@ static void iwl_pcie_write_prph_64_no_grab(struct iwl_trans *trans, u64 ofs,
*/
int iwl_pcie_rx_stop(struct iwl_trans *trans)
{
iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
return iwl_poll_direct_bit(trans, FH_MEM_RSSR_RX_STATUS_REG,
FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
if (trans->cfg->mq_rx_supported) {
iwl_write_prph(trans, RFH_RXF_DMA_CFG, 0);
return iwl_poll_prph_bit(trans, RFH_GEN_STATUS,
RXF_DMA_IDLE, RXF_DMA_IDLE, 1000);
} else {
iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
return iwl_poll_direct_bit(trans, FH_MEM_RSSR_RX_STATUS_REG,
FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
1000);
}
}
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册