提交 d7f549fa 编写于 作者: J Jiri Slaby 提交者: Linus Torvalds

Char: mxser, remove special baudrate processing

Let the special baudrate processing on the tty layer.  Also remove
set/get_special_rate ioctls introduced in commit
f64c84a1, since it is no longer needed.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Reviewed-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 f29e37c0
......@@ -173,18 +173,6 @@ static struct pci_device_id mxser_pcibrds[] = {
};
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
static int mxvar_baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
};
static unsigned int mxvar_baud_table1[] = {
0, B50, B75, B110, B134, B150, B200, B300, B600, B1200, B1800, B2400,
B4800, B9600, B19200, B38400, B57600, B115200, B230400, B460800, B921600
};
#define BAUD_TABLE_NO ARRAY_SIZE(mxvar_baud_table)
#define B_SPEC B2000000
static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
static int ttymajor = MXSERMAJOR;
static int calloutmajor = MXSERCUMAJOR;
......@@ -243,10 +231,8 @@ struct mxser_port {
int rx_trigger; /* Rx fifo trigger level */
int rx_low_water;
int baud_base; /* max. speed */
long realbaud;
int type; /* UART type */
int flags; /* defined in tty.h */
int speed;
int x_char; /* xon/xoff character */
int IER; /* Interrupt Enable Register */
......@@ -451,7 +437,6 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
static int mxser_set_baud(struct mxser_port *info, long newspd)
{
unsigned int i;
int quot = 0, baud;
unsigned char cval;
......@@ -464,27 +449,17 @@ static int mxser_set_baud(struct mxser_port *info, long newspd)
if (newspd > info->max_baud)
return -1;
info->realbaud = newspd;
for (i = 0; i < BAUD_TABLE_NO; i++)
if (newspd == mxvar_baud_table[i])
break;
if (i == BAUD_TABLE_NO) {
quot = info->baud_base / info->speed;
if (info->speed <= 0 || info->speed > info->max_baud)
quot = 0;
if (newspd == 134) {
quot = 2 * info->baud_base / 269;
tty_encode_baud_rate(info->tty, 134, 134);
} else if (newspd) {
quot = info->baud_base / newspd;
if (quot == 0)
quot = 1;
baud = info->baud_base/quot;
tty_encode_baud_rate(info->tty, baud, baud);
} else {
if (newspd == 134) {
quot = (2 * info->baud_base / 269);
tty_encode_baud_rate(info->tty, 134, 134);
} else if (newspd) {
quot = info->baud_base / newspd;
if (quot == 0)
quot = 1;
baud = info->baud_base/quot;
tty_encode_baud_rate(info->tty, baud, baud);
} else {
quot = 0;
}
quot = 0;
}
info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
......@@ -507,17 +482,19 @@ static int mxser_set_baud(struct mxser_port *info, long newspd)
outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */
outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
if (i == BAUD_TABLE_NO) {
quot = info->baud_base % info->speed;
#ifdef BOTHER
if (C_BAUD(info->tty) == BOTHER) {
quot = info->baud_base % newspd;
quot *= 8;
if ((quot % info->speed) > (info->speed / 2)) {
quot /= info->speed;
if (quot % newspd > newspd / 2) {
quot /= newspd;
quot++;
} else {
quot /= info->speed;
}
} else
quot /= newspd;
SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, quot);
} else
#endif
SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, 0);
return 0;
......@@ -533,7 +510,6 @@ static int mxser_change_speed(struct mxser_port *info,
unsigned cflag, cval, fcr;
int ret = 0;
unsigned char status;
long baud;
if (!info->tty || !info->tty->termios)
return ret;
......@@ -541,13 +517,8 @@ static int mxser_change_speed(struct mxser_port *info,
if (!(info->ioaddr))
return ret;
if (mxser_set_baud_method[info->tty->index] == 0) {
if ((cflag & CBAUD) == B_SPEC)
baud = info->speed;
else
baud = tty_get_baud_rate(info->tty);
mxser_set_baud(info, baud);
}
if (mxser_set_baud_method[info->tty->index] == 0)
mxser_set_baud(info, tty_get_baud_rate(info->tty));
/* byte size and parity */
switch (cflag & CSIZE) {
......@@ -1587,7 +1558,8 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
port->mon_data.up_txcnt;
mon_data_ext.modem_status[i] =
port->mon_data.modem_status;
mon_data_ext.baudrate[i] = port->realbaud;
mon_data_ext.baudrate[i] =
tty_get_baud_rate(port->tty);
if (!port->tty || !port->tty->termios) {
cflag = port->normal_termios.c_cflag;
......@@ -1645,7 +1617,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
struct serial_icounter_struct __user *p_cuser;
unsigned long templ;
unsigned long flags;
unsigned int i;
void __user *argp = (void __user *)arg;
int retval;
......@@ -1684,36 +1655,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
return 0;
}
if (cmd == MOXA_SET_SPECIAL_BAUD_RATE) {
int speed;
if (get_user(speed, (int __user *)argp))
return -EFAULT;
if (speed <= 0 || speed > info->max_baud)
return -EFAULT;
if (!info->tty || !info->tty->termios || !info->ioaddr)
return 0;
info->tty->termios->c_cflag &= ~(CBAUD | CBAUDEX);
for (i = 0; i < BAUD_TABLE_NO; i++)
if (speed == mxvar_baud_table[i])
break;
if (i == BAUD_TABLE_NO) {
info->tty->termios->c_cflag |= B_SPEC;
} else if (speed != 0)
info->tty->termios->c_cflag |= mxvar_baud_table1[i];
info->speed = speed;
spin_lock_irqsave(&info->slock, flags);
mxser_change_speed(info, NULL);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
} else if (cmd == MOXA_GET_SPECIAL_BAUD_RATE) {
if (copy_to_user(argp, &info->speed, sizeof(int)))
return -EFAULT;
return 0;
}
if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
test_bit(TTY_IO_ERROR, &tty->flags))
return -EIO;
......@@ -1807,20 +1748,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
info->mon_data.rxcnt = 0;
info->mon_data.txcnt = 0;
return 0;
case MOXA_ASPP_SETBAUD:{
long baud;
if (get_user(baud, (long __user *)argp))
return -EFAULT;
spin_lock_irqsave(&info->slock, flags);
mxser_set_baud(info, baud);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
}
case MOXA_ASPP_GETBAUD:
if (copy_to_user(argp, &info->realbaud, sizeof(long)))
return -EFAULT;
return 0;
case MOXA_ASPP_OQUEUE:{
int len, lsr;
......@@ -2434,7 +2361,6 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
info->normal_termios = mxvar_sdriver->init_termios;
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->delta_msr_wait);
info->speed = 9600;
memset(&info->mon_data, 0, sizeof(struct mxser_mon));
info->err_shadow = 0;
spin_lock_init(&info->slock);
......
......@@ -29,14 +29,10 @@
#define MOXA_SDS_RSTICOUNTER (MOXA + 69)
#define MOXA_ASPP_OQUEUE (MOXA + 70)
#define MOXA_ASPP_SETBAUD (MOXA + 71)
#define MOXA_ASPP_GETBAUD (MOXA + 72)
#define MOXA_ASPP_MON (MOXA + 73)
#define MOXA_ASPP_LSTATUS (MOXA + 74)
#define MOXA_ASPP_MON_EXT (MOXA + 75)
#define MOXA_SET_BAUD_METHOD (MOXA + 76)
#define MOXA_SET_SPECIAL_BAUD_RATE (MOXA + 77)
#define MOXA_GET_SPECIAL_BAUD_RATE (MOXA + 78)
/* --------------------------------------------------- */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册