[SCSI] zfcp: fix lock imbalance by reworking request queue locking

This patch adds wait_event_interruptible_lock_irq_timeout(), which is a
straight-forward descendant of wait_event_interruptible_timeout() and
wait_event_interruptible_lock_irq().

The zfcp driver used to call wait_event_interruptible_timeout()
in combination with some intricate and error-prone locking. Using
wait_event_interruptible_lock_irq_timeout() as a replacement
nicely cleans up that locking.

This rework removes a situation that resulted in a locking imbalance
in zfcp_qdio_sbal_get():

BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10
    last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp]

It was introduced by commit c2af7545
"[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new
code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit
without a required lock being held. The problem occured when a
special, non-SCSI I/O request was being submitted in process context,
when the adapter's queues had been torn down. In this case the bug
surfaced when the Fibre Channel port connection for a well-known address
was closed during a concurrent adapter shut-down procedure, which is a
rare constellation.

This patch also fixes these warnings from the sparse tool (make C=1):

drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in
 'zfcp_qdio_sbal_check' - wrong count at exit
drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in
 'zfcp_qdio_sbal_get' - unexpected unlock

Last but not least, we get rid of that crappy lock-unlock-lock
sequence at the beginning of the critical section.

It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held.
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org #2.6.35+
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/s390/scsi/zfcp_qdio.c

@@ -224,11 +224,9 @@ int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req,
 
 static int zfcp_qdio_sbal_check(struct zfcp_qdio *qdio)
 {
-	spin_lock_irq(&qdio->req_q_lock);
 	if (atomic_read(&qdio->req_q_free) ||
 	    !(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
 		return 1;
-	spin_unlock_irq(&qdio->req_q_lock);
 	return 0;
 }
 
@@ -246,9 +244,8 @@ int zfcp_qdio_sbal_get(struct zfcp_qdio *qdio)
 {
 	long ret;
 
-	spin_unlock_irq(&qdio->req_q_lock);
-	ret = wait_event_interruptible_timeout(qdio->req_q_wq,
-			       zfcp_qdio_sbal_check(qdio), 5 * HZ);
+	ret = wait_event_interruptible_lock_irq_timeout(qdio->req_q_wq,
+		       zfcp_qdio_sbal_check(qdio), qdio->req_q_lock, 5 * HZ);
 
 	if (!(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
 		return -EIO;
@@ -262,7 +259,6 @@ int zfcp_qdio_sbal_get(struct zfcp_qdio *qdio)
 		zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdsbg_1");
 	}
 
-	spin_lock_irq(&qdio->req_q_lock);
 	return -EIO;
 }
 

include/linux/wait.h

@@ -811,6 +811,63 @@ do {									\
 	__ret;								\
 })
 
+#define __wait_event_interruptible_lock_irq_timeout(wq, condition,	\
+						    lock, ret)		\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (signal_pending(current)) {				\
+			ret = -ERESTARTSYS;				\
+			break;						\
+		}							\
+		spin_unlock_irq(&lock);					\
+		ret = schedule_timeout(ret);				\
+		spin_lock_irq(&lock);					\
+		if (!ret)						\
+			break;						\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_interruptible_lock_irq_timeout - sleep until a condition gets true or a timeout elapses.
+ *		The condition is checked under the lock. This is expected
+ *		to be called with the lock taken.
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @lock: a locked spinlock_t, which will be released before schedule()
+ *	  and reacquired afterwards.
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or signal is received. The @condition is
+ * checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * This is supposed to be called while holding the lock. The lock is
+ * dropped before going to sleep and is reacquired afterwards.
+ *
+ * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
+ * was interrupted by a signal, and the remaining jiffies otherwise
+ * if the condition evaluated to true before the timeout elapsed.
+ */
+#define wait_event_interruptible_lock_irq_timeout(wq, condition, lock,	\
+						  timeout)		\
+({									\
+	int __ret = timeout;						\
+									\
+	if (!(condition))						\
+		__wait_event_interruptible_lock_irq_timeout(		\
+					wq, condition, lock, __ret);	\
+	__ret;								\
+})
+
 
 /*
  * These are the old interfaces to sleep waiting for an event.