提交 d6f2da5b 编写于 作者: J Jiri Slaby 提交者: David S. Miller

[MAC80211]: Remove bitfields from struct ieee80211_if_sta

mac80211, remove bitfields from struct ieee80211_if_sta
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NMichael Wu <flamingice@sourmilk.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 badffb72
......@@ -112,13 +112,13 @@ static ssize_t ieee80211_if_fmt_flags(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
return scnprintf(buf, buflen, "%s%s%s%s%s%s%s\n",
sdata->u.sta.ssid_set ? "SSID\n" : "",
sdata->u.sta.bssid_set ? "BSSID\n" : "",
sdata->u.sta.prev_bssid_set ? "prev BSSID\n" : "",
sdata->u.sta.authenticated ? "AUTH\n" : "",
sdata->u.sta.associated ? "ASSOC\n" : "",
sdata->u.sta.probereq_poll ? "PROBEREQ POLL\n" : "",
sdata->use_protection ? "CTS prot\n" : "");
sdata->u.sta.flags & IEEE80211_STA_SSID_SET ? "SSID\n" : "",
sdata->u.sta.flags & IEEE80211_STA_BSSID_SET ? "BSSID\n" : "",
sdata->u.sta.flags & IEEE80211_STA_PREV_BSSID_SET ? "prev BSSID\n" : "",
sdata->u.sta.flags & IEEE80211_STA_AUTHENTICATED ? "AUTH\n" : "",
sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED ? "ASSOC\n" : "",
sdata->u.sta.flags & IEEE80211_STA_PROBEREQ_POLL ? "PROBEREQ POLL\n" : "",
sdata->use_protection ? "CTS prot\n" : "");
}
__IEEE80211_IF_FILE(flags);
......
......@@ -354,7 +354,7 @@ static void ieee80211_if_open(struct net_device *dev)
switch (sdata->type) {
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.prev_bssid_set = 0;
sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
break;
}
}
......
......@@ -217,6 +217,19 @@ struct ieee80211_if_vlan {
u8 id;
};
/* flags used in struct ieee80211_if_sta.flags */
#define IEEE80211_STA_SSID_SET BIT(0)
#define IEEE80211_STA_BSSID_SET BIT(1)
#define IEEE80211_STA_PREV_BSSID_SET BIT(2)
#define IEEE80211_STA_AUTHENTICATED BIT(3)
#define IEEE80211_STA_ASSOCIATED BIT(4)
#define IEEE80211_STA_PROBEREQ_POLL BIT(5)
#define IEEE80211_STA_CREATE_IBSS BIT(6)
#define IEEE80211_STA_MIXED_CELL BIT(7)
#define IEEE80211_STA_WMM_ENABLED BIT(8)
#define IEEE80211_STA_AUTO_SSID_SEL BIT(10)
#define IEEE80211_STA_AUTO_BSSID_SEL BIT(11)
#define IEEE80211_STA_AUTO_CHANNEL_SEL BIT(12)
struct ieee80211_if_sta {
enum {
IEEE80211_DISABLED, IEEE80211_AUTHENTICATE,
......@@ -239,18 +252,7 @@ struct ieee80211_if_sta {
int auth_tries, assoc_tries;
unsigned int ssid_set:1;
unsigned int bssid_set:1;
unsigned int prev_bssid_set:1;
unsigned int authenticated:1;
unsigned int associated:1;
unsigned int probereq_poll:1;
unsigned int create_ibss:1;
unsigned int mixed_cell:1;
unsigned int wmm_enabled:1;
unsigned int auto_ssid_sel:1;
unsigned int auto_bssid_sel:1;
unsigned int auto_channel_sel:1;
unsigned int flags;
#define IEEE80211_STA_REQ_SCAN 0
#define IEEE80211_STA_REQ_AUTH 1
#define IEEE80211_STA_REQ_RUN 2
......
......@@ -187,10 +187,10 @@ void ieee80211_if_set_type(struct net_device *dev, int type)
ifsta->capab = WLAN_CAPABILITY_ESS;
ifsta->auth_algs = IEEE80211_AUTH_ALG_OPEN |
IEEE80211_AUTH_ALG_SHARED_KEY;
ifsta->create_ibss = 1;
ifsta->wmm_enabled = 1;
ifsta->auto_channel_sel = 1;
ifsta->auto_bssid_sel = 1;
ifsta->flags |= IEEE80211_STA_CREATE_IBSS |
IEEE80211_STA_WMM_ENABLED |
IEEE80211_STA_AUTO_BSSID_SEL |
IEEE80211_STA_AUTO_CHANNEL_SEL;
msdata = IEEE80211_DEV_TO_SUB_IF(sdata->local->mdev);
sdata->bss = &msdata->u.ap;
......
......@@ -270,7 +270,7 @@ static int ieee80211_ioctl_siwgenie(struct net_device *dev,
int ret = ieee80211_sta_set_extra_ie(dev, extra, data->length);
if (ret)
return ret;
sdata->u.sta.auto_bssid_sel = 0;
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
ieee80211_sta_req_auth(dev, &sdata->u.sta);
return 0;
}
......@@ -502,13 +502,14 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_STA)
sdata->u.sta.auto_channel_sel = 0;
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_CHANNEL_SEL;
/* freq->e == 0: freq->m = channel; otherwise freq = m * 10^e */
if (freq->e == 0) {
if (freq->m < 0) {
if (sdata->type == IEEE80211_IF_TYPE_STA)
sdata->u.sta.auto_channel_sel = 1;
sdata->u.sta.flags |=
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
return ieee80211_set_channel(local, freq->m, -1);
......@@ -563,7 +564,10 @@ static int ieee80211_ioctl_siwessid(struct net_device *dev,
sdata->u.sta.ssid_len = len;
return 0;
}
sdata->u.sta.auto_ssid_sel = !data->flags;
if (data->flags)
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
else
sdata->u.sta.flags |= IEEE80211_STA_AUTO_SSID_SEL;
ret = ieee80211_sta_set_ssid(dev, ssid, len);
if (ret)
return ret;
......@@ -630,13 +634,13 @@ static int ieee80211_ioctl_siwap(struct net_device *dev,
ETH_ALEN);
return 0;
}
if (is_zero_ether_addr((u8 *) &ap_addr->sa_data)) {
sdata->u.sta.auto_bssid_sel = 1;
sdata->u.sta.auto_channel_sel = 1;
} else if (is_broadcast_ether_addr((u8 *) &ap_addr->sa_data))
sdata->u.sta.auto_bssid_sel = 1;
if (is_zero_ether_addr((u8 *) &ap_addr->sa_data))
sdata->u.sta.flags |= IEEE80211_STA_AUTO_BSSID_SEL |
IEEE80211_STA_AUTO_CHANNEL_SEL;
else if (is_broadcast_ether_addr((u8 *) &ap_addr->sa_data))
sdata->u.sta.flags |= IEEE80211_STA_AUTO_BSSID_SEL;
else
sdata->u.sta.auto_bssid_sel = 0;
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
ret = ieee80211_sta_set_bssid(dev, (u8 *) &ap_addr->sa_data);
if (ret)
return ret;
......@@ -1104,8 +1108,12 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev,
if (sdata->type != IEEE80211_IF_TYPE_STA &&
sdata->type != IEEE80211_IF_TYPE_IBSS)
ret = -EINVAL;
else
sdata->u.sta.mixed_cell = !!value;
else {
if (value)
sdata->u.sta.flags |= IEEE80211_STA_MIXED_CELL;
else
sdata->u.sta.flags &= ~IEEE80211_STA_MIXED_CELL;
}
break;
case PRISM2_PARAM_HW_MODES:
......@@ -1115,15 +1123,23 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev,
case PRISM2_PARAM_CREATE_IBSS:
if (sdata->type != IEEE80211_IF_TYPE_IBSS)
ret = -EINVAL;
else
sdata->u.sta.create_ibss = !!value;
else {
if (value)
sdata->u.sta.flags |= IEEE80211_STA_CREATE_IBSS;
else
sdata->u.sta.flags &= ~IEEE80211_STA_CREATE_IBSS;
}
break;
case PRISM2_PARAM_WMM_ENABLED:
if (sdata->type != IEEE80211_IF_TYPE_STA &&
sdata->type != IEEE80211_IF_TYPE_IBSS)
ret = -EINVAL;
else
sdata->u.sta.wmm_enabled = !!value;
else {
if (value)
sdata->u.sta.flags |= IEEE80211_STA_WMM_ENABLED;
else
sdata->u.sta.flags &= ~IEEE80211_STA_WMM_ENABLED;
}
break;
default:
ret = -EOPNOTSUPP;
......@@ -1186,7 +1202,8 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev,
if (sdata->type != IEEE80211_IF_TYPE_IBSS)
ret = -EINVAL;
else
*param = !!sdata->u.sta.create_ibss;
*param = !!(sdata->u.sta.flags &
IEEE80211_STA_CREATE_IBSS);
break;
case PRISM2_PARAM_MIXED_CELL:
......@@ -1194,14 +1211,16 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev,
sdata->type != IEEE80211_IF_TYPE_IBSS)
ret = -EINVAL;
else
*param = !!sdata->u.sta.mixed_cell;
*param = !!(sdata->u.sta.flags &
IEEE80211_STA_MIXED_CELL);
break;
case PRISM2_PARAM_WMM_ENABLED:
if (sdata->type != IEEE80211_IF_TYPE_STA &&
sdata->type != IEEE80211_IF_TYPE_IBSS)
ret = -EINVAL;
else
*param = !!sdata->u.sta.wmm_enabled;
*param = !!(sdata->u.sta.flags &
IEEE80211_STA_WMM_ENABLED);
break;
default:
ret = -EOPNOTSUPP;
......
......@@ -403,18 +403,20 @@ static void ieee80211_sta_send_associnfo(struct net_device *dev,
static void ieee80211_set_associated(struct net_device *dev,
struct ieee80211_if_sta *ifsta, int assoc)
struct ieee80211_if_sta *ifsta,
unsigned int assoc)
{
union iwreq_data wrqu;
if (ifsta->associated == assoc)
if (!!(ifsta->flags & IEEE80211_STA_ASSOCIATED) == assoc)
return;
ifsta->associated = assoc;
if (assoc) {
struct ieee80211_sub_if_data *sdata;
struct ieee80211_sta_bss *bss;
ifsta->flags |= IEEE80211_STA_ASSOCIATED;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type != IEEE80211_IF_TYPE_STA)
return;
......@@ -427,11 +429,13 @@ static void ieee80211_set_associated(struct net_device *dev,
}
netif_carrier_on(dev);
ifsta->prev_bssid_set = 1;
ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET;
memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN);
memcpy(wrqu.ap_addr.sa_data, sdata->u.sta.bssid, ETH_ALEN);
ieee80211_sta_send_associnfo(dev, ifsta);
} else {
ifsta->flags &= ~IEEE80211_STA_ASSOCIATED;
netif_carrier_off(dev);
ieee80211_reset_erp_info(dev);
memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
......@@ -579,7 +583,7 @@ static void ieee80211_send_assoc(struct net_device *dev,
memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
if (ifsta->prev_bssid_set) {
if (ifsta->flags & IEEE80211_STA_PREV_BSSID_SET) {
skb_put(skb, 10);
mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
IEEE80211_STYPE_REASSOC_REQ);
......@@ -631,7 +635,7 @@ static void ieee80211_send_assoc(struct net_device *dev,
memcpy(pos, ifsta->extra_ie, ifsta->extra_ie_len);
}
if (wmm && ifsta->wmm_enabled) {
if (wmm && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
pos = skb_put(skb, 9);
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
*pos++ = 7; /* len */
......@@ -718,7 +722,8 @@ static int ieee80211_privacy_mismatch(struct net_device *dev,
struct ieee80211_sta_bss *bss;
int res = 0;
if (!ifsta || ifsta->mixed_cell || ifsta->key_management_enabled)
if (!ifsta || (ifsta->flags & IEEE80211_STA_MIXED_CELL) ||
ifsta->key_management_enabled)
return 0;
bss = ieee80211_rx_bss_get(dev, ifsta->bssid);
......@@ -786,22 +791,20 @@ static void ieee80211_associated(struct net_device *dev,
disassoc = 0;
if (time_after(jiffies,
sta->last_rx + IEEE80211_MONITORING_INTERVAL)) {
if (ifsta->probereq_poll) {
if (ifsta->flags & IEEE80211_STA_PROBEREQ_POLL) {
printk(KERN_DEBUG "%s: No ProbeResp from "
"current AP " MAC_FMT " - assume out of "
"range\n",
dev->name, MAC_ARG(ifsta->bssid));
disassoc = 1;
sta_info_free(sta);
ifsta->probereq_poll = 0;
} else {
} else
ieee80211_send_probe_req(dev, ifsta->bssid,
local->scan_ssid,
local->scan_ssid_len);
ifsta->probereq_poll = 1;
}
ifsta->flags ^= IEEE80211_STA_PROBEREQ_POLL;
} else {
ifsta->probereq_poll = 0;
ifsta->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
if (time_after(jiffies, ifsta->last_probe +
IEEE80211_PROBE_INTERVAL)) {
ifsta->last_probe = jiffies;
......@@ -905,7 +908,7 @@ static void ieee80211_auth_completed(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
{
printk(KERN_DEBUG "%s: authenticated\n", dev->name);
ifsta->authenticated = 1;
ifsta->flags |= IEEE80211_STA_AUTHENTICATED;
ieee80211_associate(dev, ifsta);
}
......@@ -1092,7 +1095,7 @@ static void ieee80211_rx_mgmt_deauth(struct net_device *dev,
" (reason=%d)\n",
dev->name, MAC_ARG(mgmt->sa), reason_code);
if (ifsta->authenticated) {
if (ifsta->flags & IEEE80211_STA_AUTHENTICATED) {
printk(KERN_DEBUG "%s: deauthenticated\n", dev->name);
}
......@@ -1105,7 +1108,7 @@ static void ieee80211_rx_mgmt_deauth(struct net_device *dev,
}
ieee80211_set_disassoc(dev, ifsta, 1);
ifsta->authenticated = 0;
ifsta->flags &= ~IEEE80211_STA_AUTHENTICATED;
}
......@@ -1137,7 +1140,7 @@ static void ieee80211_rx_mgmt_disassoc(struct net_device *dev,
" (reason=%d)\n",
dev->name, MAC_ARG(mgmt->sa), reason_code);
if (ifsta->associated)
if (ifsta->flags & IEEE80211_STA_ASSOCIATED)
printk(KERN_DEBUG "%s: disassociated\n", dev->name);
if (ifsta->state == IEEE80211_ASSOCIATED) {
......@@ -1209,7 +1212,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct net_device *dev,
/* if this was a reassociation, ensure we try a "full"
* association next time. This works around some broken APs
* which do not correctly reject reassociation requests. */
ifsta->prev_bssid_set = 0;
ifsta->flags &= ~IEEE80211_STA_PREV_BSSID_SET;
return;
}
......@@ -1296,7 +1299,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct net_device *dev,
rate_control_rate_init(sta, local);
if (elems.wmm_param && ifsta->wmm_enabled) {
if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
sta->flags |= WLAN_STA_WME;
ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
elems.wmm_param_len);
......@@ -1693,7 +1696,7 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
return;
ifsta = &sdata->u.sta;
if (!ifsta->associated ||
if (!(ifsta->flags & IEEE80211_STA_ASSOCIATED) ||
memcmp(ifsta->bssid, mgmt->bssid, ETH_ALEN) != 0)
return;
......@@ -1709,7 +1712,7 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
if (elems.erp_info && elems.erp_info_len >= 1)
ieee80211_handle_erp_ie(dev, elems.erp_info[0]);
if (elems.wmm_param && ifsta->wmm_enabled) {
if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
elems.wmm_param_len);
}
......@@ -2076,7 +2079,8 @@ static void ieee80211_sta_reset_auth(struct net_device *dev,
printk(KERN_DEBUG "%s: Initial auth_alg=%d\n", dev->name,
ifsta->auth_alg);
ifsta->auth_transaction = -1;
ifsta->associated = ifsta->auth_tries = ifsta->assoc_tries = 0;
ifsta->flags &= ~IEEE80211_STA_ASSOCIATED;
ifsta->auth_tries = ifsta->assoc_tries = 0;
netif_carrier_off(dev);
}
......@@ -2090,8 +2094,10 @@ void ieee80211_sta_req_auth(struct net_device *dev,
if (sdata->type != IEEE80211_IF_TYPE_STA)
return;
if ((ifsta->bssid_set || ifsta->auto_bssid_sel) &&
(ifsta->ssid_set || ifsta->auto_ssid_sel)) {
if ((ifsta->flags & (IEEE80211_STA_BSSID_SET |
IEEE80211_STA_AUTO_BSSID_SEL)) &&
(ifsta->flags & (IEEE80211_STA_SSID_SET |
IEEE80211_STA_AUTO_SSID_SEL))) {
set_bit(IEEE80211_STA_REQ_AUTH, &ifsta->request);
queue_work(local->hw.workqueue, &ifsta->work);
}
......@@ -2105,7 +2111,7 @@ static int ieee80211_sta_match_ssid(struct ieee80211_if_sta *ifsta,
if (!memcmp(ifsta->ssid, ssid, ssid_len))
return 1;
if (ifsta->auto_bssid_sel)
if (ifsta->flags & IEEE80211_STA_AUTO_BSSID_SEL)
return 0;
hidden_ssid = 1;
......@@ -2134,8 +2140,8 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
struct ieee80211_sta_bss *bss, *selected = NULL;
int top_rssi = 0, freq;
if (!ifsta->auto_channel_sel && !ifsta->auto_bssid_sel &&
!ifsta->auto_ssid_sel) {
if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
ifsta->state = IEEE80211_AUTHENTICATE;
ieee80211_sta_reset_auth(dev, ifsta);
return 0;
......@@ -2151,14 +2157,15 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
!!sdata->default_key)
continue;
if (!ifsta->auto_channel_sel && bss->freq != freq)
if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
bss->freq != freq)
continue;
if (!ifsta->auto_bssid_sel &&
if (!(ifsta->flags & IEEE80211_STA_AUTO_BSSID_SEL) &&
memcmp(bss->bssid, ifsta->bssid, ETH_ALEN))
continue;
if (!ifsta->auto_ssid_sel &&
if (!(ifsta->flags & IEEE80211_STA_AUTO_SSID_SEL) &&
!ieee80211_sta_match_ssid(ifsta, bss->ssid, bss->ssid_len))
continue;
......@@ -2173,7 +2180,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
if (selected) {
ieee80211_set_channel(local, -1, selected->freq);
if (!ifsta->ssid_set)
if (!(ifsta->flags & IEEE80211_STA_SSID_SET))
ieee80211_sta_set_ssid(dev, selected->ssid,
selected->ssid_len);
ieee80211_sta_set_bssid(dev, selected->bssid);
......@@ -2183,7 +2190,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
return 0;
} else {
if (ifsta->state != IEEE80211_AUTHENTICATE) {
if (ifsta->auto_ssid_sel)
if (ifsta->flags & IEEE80211_STA_AUTO_SSID_SEL)
ieee80211_sta_start_scan(dev, NULL, 0);
else
ieee80211_sta_start_scan(dev, ifsta->ssid,
......@@ -2480,10 +2487,10 @@ static int ieee80211_sta_find_ibss(struct net_device *dev,
if (time_after(jiffies, ifsta->ibss_join_req +
IEEE80211_IBSS_JOIN_TIMEOUT)) {
if (ifsta->create_ibss &&
if ((ifsta->flags & IEEE80211_STA_CREATE_IBSS) &&
local->oper_channel->flag & IEEE80211_CHAN_W_IBSS)
return ieee80211_sta_create_ibss(dev, ifsta);
if (ifsta->create_ibss) {
if (ifsta->flags & IEEE80211_STA_CREATE_IBSS) {
printk(KERN_DEBUG "%s: IBSS not allowed on the"
" configured channel %d (%d MHz)\n",
dev->name, local->hw.conf.channel,
......@@ -2544,13 +2551,17 @@ int ieee80211_sta_set_ssid(struct net_device *dev, char *ssid, size_t len)
ifsta = &sdata->u.sta;
if (ifsta->ssid_len != len || memcmp(ifsta->ssid, ssid, len) != 0)
ifsta->prev_bssid_set = 0;
ifsta->flags &= ~IEEE80211_STA_PREV_BSSID_SET;
memcpy(ifsta->ssid, ssid, len);
memset(ifsta->ssid + len, 0, IEEE80211_MAX_SSID_LEN - len);
ifsta->ssid_len = len;
ifsta->ssid_set = len ? 1 : 0;
if (sdata->type == IEEE80211_IF_TYPE_IBSS && !ifsta->bssid_set) {
if (len)
ifsta->flags |= IEEE80211_STA_SSID_SET;
else
ifsta->flags &= ~IEEE80211_STA_SSID_SET;
if (sdata->type == IEEE80211_IF_TYPE_IBSS &&
!(ifsta->flags & IEEE80211_STA_BSSID_SET)) {
ifsta->ibss_join_req = jiffies;
ifsta->state = IEEE80211_IBSS_SEARCH;
return ieee80211_sta_find_ibss(dev, ifsta);
......@@ -2588,10 +2599,11 @@ int ieee80211_sta_set_bssid(struct net_device *dev, u8 *bssid)
}
}
if (!is_valid_ether_addr(bssid))
ifsta->bssid_set = 0;
if (is_valid_ether_addr(bssid))
ifsta->flags |= IEEE80211_STA_BSSID_SET;
else
ifsta->bssid_set = 1;
ifsta->flags &= ~IEEE80211_STA_BSSID_SET;
return 0;
}
......@@ -2658,7 +2670,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw)
continue;
if (sdata->type == IEEE80211_IF_TYPE_STA) {
if (sdata->u.sta.associated)
if (sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED)
ieee80211_send_nullfunc(local, sdata, 0);
ieee80211_sta_timer((unsigned long)sdata);
}
......@@ -2670,7 +2682,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw)
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type == IEEE80211_IF_TYPE_IBSS) {
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
if (!ifsta->bssid_set ||
if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) ||
(!ifsta->state == IEEE80211_IBSS_JOINED &&
!ieee80211_sta_active_ibss(dev)))
ieee80211_sta_find_ibss(dev, ifsta);
......@@ -2812,7 +2824,7 @@ static int ieee80211_sta_start_scan(struct net_device *dev,
netif_stop_queue(sdata->dev);
if (sdata->type == IEEE80211_IF_TYPE_STA &&
sdata->u.sta.associated)
(sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED))
ieee80211_send_nullfunc(local, sdata, 1);
}
read_unlock(&local->sub_if_lock);
......@@ -3125,7 +3137,7 @@ int ieee80211_sta_disassociate(struct net_device *dev, u16 reason)
if (sdata->type != IEEE80211_IF_TYPE_STA)
return -EINVAL;
if (!ifsta->associated)
if (!(ifsta->flags & IEEE80211_STA_ASSOCIATED))
return -1;
ieee80211_send_disassoc(dev, ifsta, reason);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册