Merge branch 'linus' into locking/core, to pick up fixes before applying new changes

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Documentation/gpio/board.txt

@@ -21,8 +21,8 @@ exact way to do it depends on the GPIO controller providing the GPIOs, see the
 device tree bindings for your controller.
 
 GPIOs mappings are defined in the consumer device's node, in a property named
-<function>-gpios, where <function> is the function the driver will request
-through gpiod_get(). For example:
+either <function>-gpios or <function>-gpio, where <function> is the function
+the driver will request through gpiod_get(). For example:
 
 	foo_device {
 		compatible = "acme,foo";
@@ -31,7 +31,7 @@ through gpiod_get(). For example:
 			    <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
 			    <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
 
-		power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
 	};
 
 This property will make GPIOs 15, 16 and 17 available to the driver under the
@@ -39,15 +39,24 @@ This property will make GPIOs 15, 16 and 17 available to the driver under the
 
 	struct gpio_desc *red, *green, *blue, *power;
 
-	red = gpiod_get_index(dev, "led", 0);
-	green = gpiod_get_index(dev, "led", 1);
-	blue = gpiod_get_index(dev, "led", 2);
+	red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+	green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+	blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
 
-	power = gpiod_get(dev, "power");
+	power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
 
 The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
 gpiod_is_active_low(power) will be true).
 
+The second parameter of the gpiod_get() functions, the con_id string, has to be
+the <function>-prefix of the GPIO suffixes ("gpios" or "gpio", automatically
+looked up by the gpiod functions internally) used in the device tree. With above
+"led-gpios" example, use the prefix without the "-" as con_id parameter: "led".
+
+Internally, the GPIO subsystem prefixes the GPIO suffix ("gpios" or "gpio")
+with the string passed in con_id to get the resulting string
+(snprintf(... "%s-%s", con_id, gpio_suffixes[]).
+
 ACPI
 ----
 ACPI also supports function names for GPIOs in a similar fashion to DT.
@@ -142,13 +151,14 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 
 	struct gpio_desc *red, *green, *blue, *power;
 
-	red = gpiod_get_index(dev, "led", 0);
-	green = gpiod_get_index(dev, "led", 1);
-	blue = gpiod_get_index(dev, "led", 2);
+	red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+	green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+	blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
 
-	power = gpiod_get(dev, "power");
-	gpiod_direction_output(power, 1);
+	power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
 
-Since the "power" GPIO is mapped as active-low, its actual signal will be 0
-after this code. Contrary to the legacy integer GPIO interface, the active-low
-property is handled during mapping and is thus transparent to GPIO consumers.
+Since the "led" GPIOs are mapped as active-high, this example will switch their
+signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
+as active-low, its actual signal will be 0 after this code. Contrary to the legacy
+integer GPIO interface, the active-low property is handled during mapping and is
+thus transparent to GPIO consumers.

Documentation/gpio/consumer.txt

@@ -39,6 +39,9 @@ device that displays digits), an additional index argument can be specified:
 					  const char *con_id, unsigned int idx,
 					  enum gpiod_flags flags)
 
+For a more detailed description of the con_id parameter in the DeviceTree case
+see Documentation/gpio/board.txt
+
 The flags parameter is used to optionally specify a direction and initial value
 for the GPIO. Values can be:
 

Documentation/hwmon/nct6775

@@ -32,6 +32,10 @@ Supported chips:
     Prefix: 'nct6792'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: Available from Nuvoton upon request
+  * Nuvoton NCT6793D
+    Prefix: 'nct6793'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Available from Nuvoton upon request
 
 Authors:
         Guenter Roeck <linux@roeck-us.net>

Documentation/static-keys.txt

@@ -15,8 +15,8 @@ The updated API replacements are:
 
 DEFINE_STATIC_KEY_TRUE(key);
 DEFINE_STATIC_KEY_FALSE(key);
-static_key_likely()
-static_key_unlikely()
+static_branch_likely()
+static_branch_unlikely()
 
 0) Abstract
 

MAINTAINERS

@@ -6452,11 +6452,11 @@ F:	drivers/hwmon/ltc4261.c
 LTP (Linux Test Project)
 M:	Mike Frysinger <vapier@gentoo.org>
 M:	Cyril Hrubis <chrubis@suse.cz>
-M:	Wanlong Gao <gaowanlong@cn.fujitsu.com>
+M:	Wanlong Gao <wanlong.gao@gmail.com>
 M:	Jan Stancek <jstancek@redhat.com>
 M:	Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
 M:	Alexey Kodanev <alexey.kodanev@oracle.com>
-L:	ltp-list@lists.sourceforge.net (subscribers-only)
+L:	ltp@lists.linux.it (subscribers-only)
 W:	http://linux-test-project.github.io/
 T:	git git://github.com/linux-test-project/ltp.git
 S:	Maintained

arch/alpha/include/asm/io.h

@@ -297,7 +297,9 @@ static inline void __iomem * ioremap_nocache(unsigned long offset,
 					     unsigned long size)
 {
 	return ioremap(offset, size);
-} 
+}
+
+#define ioremap_uc ioremap_nocache
 
 static inline void iounmap(volatile void __iomem *addr)
 {

arch/alpha/lib/udelay.c

@@ -30,6 +30,7 @@ __delay(int loops)
 		"	bgt %0,1b"
 		: "=&r" (tmp), "=r" (loops) : "1"(loops));
 }
+EXPORT_SYMBOL(__delay);
 
 #ifdef CONFIG_SMP
 #define LPJ	 cpu_data[smp_processor_id()].loops_per_jiffy

arch/arm/Makefile

@@ -54,6 +54,14 @@ AS		+= -EL
 LD		+= -EL
 endif
 
+#
+# The Scalar Replacement of Aggregates (SRA) optimization pass in GCC 4.9 and
+# later may result in code being generated that handles signed short and signed
+# char struct members incorrectly. So disable it.
+# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932)
+#
+KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
+
 # This selects which instruction set is used.
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes

arch/arm/include/asm/assembler.h

@@ -491,11 +491,6 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #endif
 	.endm
 
-	.macro	uaccess_save_and_disable, tmp
-	uaccess_save \tmp
-	uaccess_disable \tmp
-	.endm
-
 	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
 	.macro	ret\c, reg
 #if __LINUX_ARM_ARCH__ < 6

arch/arm/include/asm/bug.h

@@ -40,6 +40,7 @@ do {								\
 		"2:\t.asciz " #__file "\n" 			\
 		".popsection\n" 				\
 		".pushsection __bug_table,\"a\"\n"		\
+		".align 2\n"					\
 		"3:\t.word 1b, 2b\n"				\
 		"\t.hword " #__line ", 0\n"			\
 		".popsection");					\

arch/arm/include/asm/domain.h

@@ -12,6 +12,7 @@
 
 #ifndef __ASSEMBLY__
 #include <asm/barrier.h>
+#include <asm/thread_info.h>
 #endif
 
 /*
@@ -89,7 +90,8 @@ static inline unsigned int get_domain(void)
 
 	asm(
 	"mrc	p15, 0, %0, c3, c0	@ get domain"
-	 : "=r" (domain));
+	 : "=r" (domain)
+	 : "m" (current_thread_info()->cpu_domain));
 
 	return domain;
 }
@@ -98,7 +100,7 @@ static inline void set_domain(unsigned val)
 {
 	asm volatile(
 	"mcr	p15, 0, %0, c3, c0	@ set domain"
-	  : : "r" (val));
+	  : : "r" (val) : "memory");
 	isb();
 }
 

arch/arm/include/asm/thread_info.h

@@ -25,7 +25,6 @@
 struct task_struct;
 
 #include <asm/types.h>
-#include <asm/domain.h>
 
 typedef unsigned long mm_segment_t;
 

arch/arm/kernel/process.c

@@ -226,6 +226,7 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 
 	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
 
+#ifdef CONFIG_CPU_USE_DOMAINS
 	/*
 	 * Copy the initial value of the domain access control register
 	 * from the current thread: thread->addr_limit will have been
@@ -233,6 +234,7 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	 * kernel/fork.c
 	 */
 	thread->cpu_domain = get_domain();
+#endif
 
 	if (likely(!(p->flags & PF_KTHREAD))) {
 		*childregs = *current_pt_regs();

arch/arm/nwfpe/entry.S

@@ -95,9 +95,10 @@ emulate:
 	reteq	r4			@ no, return failure
 
 next:
+	uaccess_enable r3
 .Lx1:	ldrt	r6, [r5], #4		@ get the next instruction and
 					@ increment PC
-
+	uaccess_disable r3
 	and	r2, r6, #0x0F000000	@ test for FP insns
 	teq	r2, #0x0C000000
 	teqne	r2, #0x0D000000

arch/arm/xen/hypercall.S

@@ -98,8 +98,23 @@ ENTRY(privcmd_call)
 	mov r1, r2
 	mov r2, r3
 	ldr r3, [sp, #8]
+	/*
+	 * Privcmd calls are issued by the userspace. We need to allow the
+	 * kernel to access the userspace memory before issuing the hypercall.
+	 */
+	uaccess_enable r4
+
+	/* r4 is loaded now as we use it as scratch register before */
 	ldr r4, [sp, #4]
 	__HVC(XEN_IMM)
+
+	/*
+	 * Disable userspace access from kernel. This is fine to do it
+	 * unconditionally as no set_fs(KERNEL_DS)/set_fs(get_ds()) is
+	 * called before.
+	 */
+	uaccess_disable r4
+
 	ldm sp!, {r4}
 	ret lr
 ENDPROC(privcmd_call);

arch/arm64/Kconfig

@@ -32,6 +32,7 @@ config ARM64
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_EARLY_IOREMAP
+	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -331,6 +332,22 @@ config ARM64_ERRATUM_845719
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_843419
+	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
+	depends on MODULES
+	default y
+	help
+	  This option builds kernel modules using the large memory model in
+	  order to avoid the use of the ADRP instruction, which can cause
+	  a subsequent memory access to use an incorrect address on Cortex-A53
+	  parts up to r0p4.
+
+	  Note that the kernel itself must be linked with a version of ld
+	  which fixes potentially affected ADRP instructions through the
+	  use of veneers.
+
+	  If unsure, say Y.
+
 endmenu
 
 

arch/arm64/Makefile

@@ -41,6 +41,10 @@ endif
 
 CHECKFLAGS	+= -D__aarch64__
 
+ifeq ($(CONFIG_ARM64_ERRATUM_843419), y)
+CFLAGS_MODULE	+= -mcmodel=large
+endif
+
 # Default value
 head-y		:= arch/arm64/kernel/head.o
 

arch/arm64/include/asm/pgtable.h

@@ -26,13 +26,9 @@
  * Software defined PTE bits definition.
  */
 #define PTE_VALID		(_AT(pteval_t, 1) << 0)
+#define PTE_WRITE		(PTE_DBM)		 /* same as DBM (51) */
 #define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
 #define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
-#ifdef CONFIG_ARM64_HW_AFDBM
-#define PTE_WRITE		(PTE_DBM)		 /* same as DBM */
-#else
-#define PTE_WRITE		(_AT(pteval_t, 1) << 57)
-#endif
 #define PTE_PROT_NONE		(_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
 
 /*
@@ -146,7 +142,7 @@ extern struct page *empty_zero_page;
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 
 #ifdef CONFIG_ARM64_HW_AFDBM
-#define pte_hw_dirty(pte)	(!(pte_val(pte) & PTE_RDONLY))
+#define pte_hw_dirty(pte)	(pte_write(pte) && !(pte_val(pte) & PTE_RDONLY))
 #else
 #define pte_hw_dirty(pte)	(0)
 #endif
@@ -238,7 +234,7 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
  * When hardware DBM is not present, the sofware PTE_DIRTY bit is updated via
  * the page fault mechanism. Checking the dirty status of a pte becomes:
  *
- *   PTE_DIRTY || !PTE_RDONLY
+ *   PTE_DIRTY || (PTE_WRITE && !PTE_RDONLY)
  */
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
@@ -503,7 +499,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 			      PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
 	/* preserve the hardware dirty information */
 	if (pte_hw_dirty(pte))
-		newprot |= PTE_DIRTY;
+		pte = pte_mkdirty(pte);
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
 	return pte;
 }

arch/arm64/kernel/debug-monitors.c

@@ -134,7 +134,7 @@ static int os_lock_notify(struct notifier_block *self,
 				    unsigned long action, void *data)
 {
 	int cpu = (unsigned long)data;
-	if (action == CPU_ONLINE)
+	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE)
 		smp_call_function_single(cpu, clear_os_lock, NULL, 1);
 	return NOTIFY_OK;
 }

arch/arm64/kernel/head.S

@@ -523,6 +523,11 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
 #endif
 
+	/* EL2 debug */
+	mrs	x0, pmcr_el0			// Disable debug access traps
+	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
+	msr	mdcr_el2, x0			// all PMU counters from EL1
+
 	/* Stage-2 translation */
 	msr	vttbr_el2, xzr
 

arch/arm64/kernel/hw_breakpoint.c

@@ -872,7 +872,7 @@ static int hw_breakpoint_reset_notify(struct notifier_block *self,
 						void *hcpu)
 {
 	int cpu = (long)hcpu;
-	if (action == CPU_ONLINE)
+	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE)
 		smp_call_function_single(cpu, hw_breakpoint_reset, NULL, 1);
 	return NOTIFY_OK;
 }

arch/arm64/kernel/module.c

@@ -332,12 +332,14 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 0, 21,
 					     AARCH64_INSN_IMM_ADR);
 			break;
+#ifndef CONFIG_ARM64_ERRATUM_843419
 		case R_AARCH64_ADR_PREL_PG_HI21_NC:
 			overflow_check = false;
 		case R_AARCH64_ADR_PREL_PG_HI21:
 			ovf = reloc_insn_imm(RELOC_OP_PAGE, loc, val, 12, 21,
 					     AARCH64_INSN_IMM_ADR);
 			break;
+#endif
 		case R_AARCH64_ADD_ABS_LO12_NC:
 		case R_AARCH64_LDST8_ABS_LO12_NC:
 			overflow_check = false;

arch/arm64/kernel/signal32.c

@@ -212,14 +212,32 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 
 /*
  * VFP save/restore code.
+ *
+ * We have to be careful with endianness, since the fpsimd context-switch
+ * code operates on 128-bit (Q) register values whereas the compat ABI
+ * uses an array of 64-bit (D) registers. Consequently, we need to swap
+ * the two halves of each Q register when running on a big-endian CPU.
  */
+union __fpsimd_vreg {
+	__uint128_t	raw;
+	struct {
+#ifdef __AARCH64EB__
+		u64	hi;
+		u64	lo;
+#else
+		u64	lo;
+		u64	hi;
+#endif
+	};
+};
+
 static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
 {
 	struct fpsimd_state *fpsimd = &current->thread.fpsimd_state;
 	compat_ulong_t magic = VFP_MAGIC;
 	compat_ulong_t size = VFP_STORAGE_SIZE;
 	compat_ulong_t fpscr, fpexc;
-	int err = 0;
+	int i, err = 0;
 
 	/*
 	 * Save the hardware registers to the fpsimd_state structure.
@@ -235,10 +253,15 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
 	/*
 	 * Now copy the FP registers. Since the registers are packed,
 	 * we can copy the prefix we want (V0-V15) as it is.
-	 * FIXME: Won't work if big endian.
 	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, fpsimd->vregs,
-			      sizeof(frame->ufp.fpregs));
+	for (i = 0; i < ARRAY_SIZE(frame->ufp.fpregs); i += 2) {
+		union __fpsimd_vreg vreg = {
+			.raw = fpsimd->vregs[i >> 1],
+		};
+
+		__put_user_error(vreg.lo, &frame->ufp.fpregs[i], err);
+		__put_user_error(vreg.hi, &frame->ufp.fpregs[i + 1], err);
+	}
 
 	/* Create an AArch32 fpscr from the fpsr and the fpcr. */
 	fpscr = (fpsimd->fpsr & VFP_FPSCR_STAT_MASK) |
@@ -263,7 +286,7 @@ static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame)
 	compat_ulong_t magic = VFP_MAGIC;
 	compat_ulong_t size = VFP_STORAGE_SIZE;
 	compat_ulong_t fpscr;
-	int err = 0;
+	int i, err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
 	__get_user_error(size, &frame->size, err);
@@ -273,12 +296,14 @@ static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	/*
-	 * Copy the FP registers into the start of the fpsimd_state.
-	 * FIXME: Won't work if big endian.
-	 */
-	err |= __copy_from_user(fpsimd.vregs, frame->ufp.fpregs,
-				sizeof(frame->ufp.fpregs));
+	/* Copy the FP registers into the start of the fpsimd_state. */
+	for (i = 0; i < ARRAY_SIZE(frame->ufp.fpregs); i += 2) {
+		union __fpsimd_vreg vreg;
+
+		__get_user_error(vreg.lo, &frame->ufp.fpregs[i], err);
+		__get_user_error(vreg.hi, &frame->ufp.fpregs[i + 1], err);
+		fpsimd.vregs[i >> 1] = vreg.raw;
+	}
 
 	/* Extract the fpsr and the fpcr from the fpscr */
 	__get_user_error(fpscr, &frame->ufp.fpscr, err);

arch/arm64/mm/dma-mapping.c

@@ -100,7 +100,7 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
 	if (IS_ENABLED(CONFIG_ZONE_DMA) &&
 	    dev->coherent_dma_mask <= DMA_BIT_MASK(32))
 		flags |= GFP_DMA;
-	if (IS_ENABLED(CONFIG_DMA_CMA) && (flags & __GFP_WAIT)) {
+	if (dev_get_cma_area(dev) && (flags & __GFP_WAIT)) {
 		struct page *page;
 		void *addr;
 

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			319 /* length of syscall table */
+#define NR_syscalls			321 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -332,5 +332,7 @@
 #define __NR_memfd_create		1340
 #define __NR_bpf			1341
 #define __NR_execveat			1342
+#define __NR_userfaultfd		1343
+#define __NR_membarrier			1344
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/entry.S

@@ -1768,5 +1768,7 @@ sys_call_table:
 	data8 sys_memfd_create			// 1340
 	data8 sys_bpf
 	data8 sys_execveat
+	data8 sys_userfaultfd
+	data8 sys_membarrier
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls

arch/x86/Kconfig

@@ -1006,7 +1006,7 @@ config X86_THERMAL_VECTOR
 	depends on X86_MCE_INTEL
 
 config X86_LEGACY_VM86
-	bool "Legacy VM86 support (obsolete)"
+	bool "Legacy VM86 support"
 	default n
 	depends on X86_32
 	---help---
@@ -1018,19 +1018,20 @@ config X86_LEGACY_VM86
 	  available to accelerate real mode DOS programs.  However, any
 	  recent version of DOSEMU, X, or vbetool should be fully
 	  functional even without kernel VM86 support, as they will all
-	  fall back to (pretty well performing) software emulation.
+	  fall back to software emulation. Nevertheless, if you are using
+	  a 16-bit DOS program where 16-bit performance matters, vm86
+	  mode might be faster than emulation and you might want to
+	  enable this option.
 
-	  Anything that works on a 64-bit kernel is unlikely to need
-	  this option, as 64-bit kernels don't, and can't, support V8086
-	  mode.  This option is also unrelated to 16-bit protected mode
-	  and is not needed to run most 16-bit programs under Wine.
+	  Note that any app that works on a 64-bit kernel is unlikely to
+	  need this option, as 64-bit kernels don't, and can't, support
+	  V8086 mode. This option is also unrelated to 16-bit protected
+	  mode and is not needed to run most 16-bit programs under Wine.
 
-	  Enabling this option adds considerable attack surface to the
-	  kernel and slows down system calls and exception handling.
+	  Enabling this option increases the complexity of the kernel
+	  and slows down exception handling a tiny bit.
 
-	  Unless you use very old userspace or need the last drop of
-	  performance in your real mode DOS games and can't use KVM,
-	  say N here.
+	  If unsure, say N here.
 
 config VM86
        bool

arch/x86/include/asm/cpufeature.h

@@ -241,6 +241,7 @@
 #define X86_FEATURE_AVX512PF	( 9*32+26) /* AVX-512 Prefetch */
 #define X86_FEATURE_AVX512ER	( 9*32+27) /* AVX-512 Exponential and Reciprocal */
 #define X86_FEATURE_AVX512CD	( 9*32+28) /* AVX-512 Conflict Detection */
+#define X86_FEATURE_SHA_NI	( 9*32+29) /* SHA1/SHA256 Instruction Extensions */
 
 /* Extended state features, CPUID level 0x0000000d:1 (eax), word 10 */
 #define X86_FEATURE_XSAVEOPT	(10*32+ 0) /* XSAVEOPT */

arch/x86/include/asm/paravirt_types.h

@@ -97,7 +97,6 @@ struct pv_lazy_ops {
 struct pv_time_ops {
 	unsigned long long (*sched_clock)(void);
 	unsigned long long (*steal_clock)(int cpu);
-	unsigned long (*get_tsc_khz)(void);
 };
 
 struct pv_cpu_ops {

arch/x86/kernel/alternative.c

@@ -338,10 +338,15 @@ recompute_jump(struct alt_instr *a, u8 *orig_insn, u8 *repl_insn, u8 *insnbuf)
 
 static void __init_or_module optimize_nops(struct alt_instr *a, u8 *instr)
 {
+	unsigned long flags;
+
 	if (instr[0] != 0x90)
 		return;
 
+	local_irq_save(flags);
 	add_nops(instr + (a->instrlen - a->padlen), a->padlen);
+	sync_core();
+	local_irq_restore(flags);
 
 	DUMP_BYTES(instr, a->instrlen, "%p: [%d:%d) optimized NOPs: ",
 		   instr, a->instrlen - a->padlen, a->padlen);

arch/x86/kernel/apic/apic.c

@@ -336,6 +336,13 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 	apic_write(APIC_LVTT, lvtt_value);
 
 	if (lvtt_value & APIC_LVT_TIMER_TSCDEADLINE) {
+		/*
+		 * See Intel SDM: TSC-Deadline Mode chapter. In xAPIC mode,
+		 * writing to the APIC LVTT and TSC_DEADLINE MSR isn't serialized.
+		 * According to Intel, MFENCE can do the serialization here.
+		 */
+		asm volatile("mfence" : : : "memory");
+
 		printk_once(KERN_DEBUG "TSC deadline timer enabled\n");
 		return;
 	}

arch/x86/kernel/apic/io_apic.c

@@ -2522,6 +2522,7 @@ void __init setup_ioapic_dest(void)
 	int pin, ioapic, irq, irq_entry;
 	const struct cpumask *mask;
 	struct irq_data *idata;
+	struct irq_chip *chip;
 
 	if (skip_ioapic_setup == 1)
 		return;
@@ -2545,9 +2546,9 @@ void __init setup_ioapic_dest(void)
 		else
 			mask = apic->target_cpus();
 
-		irq_set_affinity(irq, mask);
+		chip = irq_data_get_irq_chip(idata);
+		chip->irq_set_affinity(idata, mask, false);
 	}
-
 }
 #endif
 

arch/x86/kernel/cpu/common.c

@@ -1110,10 +1110,10 @@ void print_cpu_info(struct cpuinfo_x86 *c)
 	else
 		printk(KERN_CONT "%d86", c->x86);
 
-	printk(KERN_CONT " (fam: %02x, model: %02x", c->x86, c->x86_model);
+	printk(KERN_CONT " (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
 
 	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT ", stepping: %02x)\n", c->x86_mask);
+		printk(KERN_CONT ", stepping: 0x%x)\n", c->x86_mask);
 	else
 		printk(KERN_CONT ")\n");
 

arch/x86/kernel/cpu/perf_event_intel.c

@@ -2316,9 +2316,12 @@ static struct event_constraint *
 intel_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
 			    struct perf_event *event)
 {
-	struct event_constraint *c1 = cpuc->event_constraint[idx];
+	struct event_constraint *c1 = NULL;
 	struct event_constraint *c2;
 
+	if (idx >= 0) /* fake does < 0 */
+		c1 = cpuc->event_constraint[idx];
+
 	/*
 	 * first time only
 	 * - static constraint: no change across incremental scheduling calls

arch/x86/kernel/cpu/perf_event_intel_bts.c

@@ -222,6 +222,7 @@ static void __bts_event_start(struct perf_event *event)
 	if (!buf || bts_buffer_is_full(buf, bts))
 		return;
 
+	event->hw.itrace_started = 1;
 	event->hw.state = 0;
 
 	if (!buf->snapshot)

arch/x86/kernel/ldt.c

@@ -58,7 +58,7 @@ static struct ldt_struct *alloc_ldt_struct(int size)
 	if (alloc_size > PAGE_SIZE)
 		new_ldt->entries = vzalloc(alloc_size);
 	else
-		new_ldt->entries = kzalloc(PAGE_SIZE, GFP_KERNEL);
+		new_ldt->entries = (void *)get_zeroed_page(GFP_KERNEL);
 
 	if (!new_ldt->entries) {
 		kfree(new_ldt);
@@ -95,7 +95,7 @@ static void free_ldt_struct(struct ldt_struct *ldt)
 	if (ldt->size * LDT_ENTRY_SIZE > PAGE_SIZE)
 		vfree(ldt->entries);
 	else
-		kfree(ldt->entries);
+		free_page((unsigned long)ldt->entries);
 	kfree(ldt);
 }
 

arch/x86/kernel/tsc.c

@@ -21,6 +21,7 @@
 #include <asm/hypervisor.h>
 #include <asm/nmi.h>
 #include <asm/x86_init.h>
+#include <asm/geode.h>
 
 unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
@@ -1013,15 +1014,17 @@ EXPORT_SYMBOL_GPL(mark_tsc_unstable);
 
 static void __init check_system_tsc_reliable(void)
 {
-#ifdef CONFIG_MGEODE_LX
-	/* RTSC counts during suspend */
+#if defined(CONFIG_MGEODEGX1) || defined(CONFIG_MGEODE_LX) || defined(CONFIG_X86_GENERIC)
+	if (is_geode_lx()) {
+		/* RTSC counts during suspend */
 #define RTSC_SUSP 0x100
-	unsigned long res_low, res_high;
+		unsigned long res_low, res_high;
 
-	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
-	/* Geode_LX - the OLPC CPU has a very reliable TSC */
-	if (res_low & RTSC_SUSP)
-		tsc_clocksource_reliable = 1;
+		rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
+		/* Geode_LX - the OLPC CPU has a very reliable TSC */
+		if (res_low & RTSC_SUSP)
+			tsc_clocksource_reliable = 1;
+	}
 #endif
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
 		tsc_clocksource_reliable = 1;

arch/x86/kernel/vm86_32.c

@@ -45,6 +45,7 @@
 #include <linux/audit.h>
 #include <linux/stddef.h>
 #include <linux/slab.h>
+#include <linux/security.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -232,6 +233,32 @@ static long do_sys_vm86(struct vm86plus_struct __user *user_vm86, bool plus)
 	struct pt_regs *regs = current_pt_regs();
 	unsigned long err = 0;
 
+	err = security_mmap_addr(0);
+	if (err) {
+		/*
+		 * vm86 cannot virtualize the address space, so vm86 users
+		 * need to manage the low 1MB themselves using mmap.  Given
+		 * that BIOS places important data in the first page, vm86
+		 * is essentially useless if mmap_min_addr != 0.  DOSEMU,
+		 * for example, won't even bother trying to use vm86 if it
+		 * can't map a page at virtual address 0.
+		 *
+		 * To reduce the available kernel attack surface, simply
+		 * disallow vm86(old) for users who cannot mmap at va 0.
+		 *
+		 * The implementation of security_mmap_addr will allow
+		 * suitably privileged users to map va 0 even if
+		 * vm.mmap_min_addr is set above 0, and we want this
+		 * behavior for vm86 as well, as it ensures that legacy
+		 * tools like vbetool will not fail just because of
+		 * vm.mmap_min_addr.
+		 */
+		pr_info_once("Denied a call to vm86(old) from %s[%d] (uid: %d).  Set the vm.mmap_min_addr sysctl to 0 and/or adjust LSM mmap_min_addr policy to enable vm86 if you are using a vm86-based DOS emulator.\n",
+			     current->comm, task_pid_nr(current),
+			     from_kuid_munged(&init_user_ns, current_uid()));
+		return -EPERM;
+	}
+
 	if (!vm86) {
 		if (!(vm86 = kzalloc(sizeof(*vm86), GFP_KERNEL)))
 			return -ENOMEM;

arch/x86/mm/srat.c

@@ -192,10 +192,11 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 
 	node_set(node, numa_nodes_parsed);
 
-	pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s\n",
+	pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n",
 		node, pxm,
 		(unsigned long long) start, (unsigned long long) end - 1,
-		hotpluggable ? " hotplug" : "");
+		hotpluggable ? " hotplug" : "",
+		ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : "");
 
 	/* Mark hotplug range in memblock. */
 	if (hotpluggable && memblock_mark_hotplug(start, ma->length))

crypto/testmgr.c

@@ -940,6 +940,7 @@ static int __test_skcipher(struct crypto_skcipher *tfm, int enc,
 	char *xbuf[XBUFSIZE];
 	char *xoutbuf[XBUFSIZE];
 	int ret = -ENOMEM;
+	unsigned int ivsize = crypto_skcipher_ivsize(tfm);
 
 	if (testmgr_alloc_buf(xbuf))
 		goto out_nobuf;
@@ -975,7 +976,7 @@ static int __test_skcipher(struct crypto_skcipher *tfm, int enc,
 			continue;
 
 		if (template[i].iv)
-			memcpy(iv, template[i].iv, MAX_IVLEN);
+			memcpy(iv, template[i].iv, ivsize);
 		else
 			memset(iv, 0, MAX_IVLEN);
 
@@ -1051,7 +1052,7 @@ static int __test_skcipher(struct crypto_skcipher *tfm, int enc,
 			continue;
 
 		if (template[i].iv)
-			memcpy(iv, template[i].iv, MAX_IVLEN);
+			memcpy(iv, template[i].iv, ivsize);
 		else
 			memset(iv, 0, MAX_IVLEN);
 

drivers/block/zram/zcomp.c

@@ -330,12 +330,14 @@ void zcomp_destroy(struct zcomp *comp)
  * allocate new zcomp and initialize it. return compressing
  * backend pointer or ERR_PTR if things went bad. ERR_PTR(-EINVAL)
  * if requested algorithm is not supported, ERR_PTR(-ENOMEM) in
- * case of allocation error.
+ * case of allocation error, or any other error potentially
+ * returned by functions zcomp_strm_{multi,single}_create.
  */
 struct zcomp *zcomp_create(const char *compress, int max_strm)
 {
 	struct zcomp *comp;
 	struct zcomp_backend *backend;
+	int error;
 
 	backend = find_backend(compress);
 	if (!backend)
@@ -347,12 +349,12 @@ struct zcomp *zcomp_create(const char *compress, int max_strm)
 
 	comp->backend = backend;
 	if (max_strm > 1)
-		zcomp_strm_multi_create(comp, max_strm);
+		error = zcomp_strm_multi_create(comp, max_strm);
 	else
-		zcomp_strm_single_create(comp);
-	if (!comp->stream) {
+		error = zcomp_strm_single_create(comp);
+	if (error) {
 		kfree(comp);
-		return ERR_PTR(-ENOMEM);
+		return ERR_PTR(error);
 	}
 	return comp;
 }

drivers/clk/h8300/clk-h8s2678.c

@@ -8,6 +8,7 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/of_address.h>
+#include <linux/slab.h>
 
 static DEFINE_SPINLOCK(clklock);
 

drivers/clk/hisilicon/Kconfig

 config COMMON_CLK_HI6220
 	bool "Hi6220 Clock Driver"
-	depends on (ARCH_HISI || COMPILE_TEST) && MAILBOX
+	depends on ARCH_HISI || COMPILE_TEST
 	default ARCH_HISI
 	help
 	  Build the Hisilicon Hi6220 clock driver based on the common clock framework.
+
+config STUB_CLK_HI6220
+	bool "Hi6220 Stub Clock Driver"
+	depends on COMMON_CLK_HI6220 && MAILBOX
+	help
+	  Build the Hisilicon Hi6220 stub clock driver.

drivers/clk/hisilicon/Makefile

@@ -7,4 +7,5 @@ obj-y	+= clk.o clkgate-separated.o clkdivider-hi6220.o
 obj-$(CONFIG_ARCH_HI3xxx)	+= clk-hi3620.o
 obj-$(CONFIG_ARCH_HIP04)	+= clk-hip04.o
 obj-$(CONFIG_ARCH_HIX5HD2)	+= clk-hix5hd2.o
-obj-$(CONFIG_COMMON_CLK_HI6220)	+= clk-hi6220.o clk-hi6220-stub.o
+obj-$(CONFIG_COMMON_CLK_HI6220)	+= clk-hi6220.o
+obj-$(CONFIG_STUB_CLK_HI6220)	+= clk-hi6220-stub.o

drivers/clk/rockchip/clk-rk3188.c

@@ -716,6 +716,8 @@ static const char *const rk3188_critical_clocks[] __initconst = {
 	"aclk_cpu",
 	"aclk_peri",
 	"hclk_peri",
+	"pclk_cpu",
+	"pclk_peri",
 };
 
 static void __init rk3188_common_clk_init(struct device_node *np)
@@ -744,8 +746,6 @@ static void __init rk3188_common_clk_init(struct device_node *np)
 
 	rockchip_clk_register_branches(common_clk_branches,
 				  ARRAY_SIZE(common_clk_branches));
-	rockchip_clk_protect_critical(rk3188_critical_clocks,
-				      ARRAY_SIZE(rk3188_critical_clocks));
 
 	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
 				  ROCKCHIP_SOFTRST_HIWORD_MASK);
@@ -765,6 +765,8 @@ static void __init rk3066a_clk_init(struct device_node *np)
 			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
 			&rk3066_cpuclk_data, rk3066_cpuclk_rates,
 			ARRAY_SIZE(rk3066_cpuclk_rates));
+	rockchip_clk_protect_critical(rk3188_critical_clocks,
+				      ARRAY_SIZE(rk3188_critical_clocks));
 }
 CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init);
 
@@ -801,6 +803,9 @@ static void __init rk3188a_clk_init(struct device_node *np)
 		pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n",
 			__func__);
 	}
+
+	rockchip_clk_protect_critical(rk3188_critical_clocks,
+				      ARRAY_SIZE(rk3188_critical_clocks));
 }
 CLK_OF_DECLARE(rk3188a_cru, "rockchip,rk3188a-cru", rk3188a_clk_init);
 

drivers/crypto/Kconfig

@@ -461,7 +461,7 @@ config CRYPTO_DEV_QCE
 
 config CRYPTO_DEV_VMX
 	bool "Support for VMX cryptographic acceleration instructions"
-	depends on PPC64
+	depends on PPC64 && VSX
 	help
 	  Support for VMX cryptographic acceleration instructions.
 

drivers/crypto/sunxi-ss/sun4i-ss-cipher.c

@@ -104,7 +104,7 @@ static int sun4i_ss_opti_poll(struct ablkcipher_request *areq)
 			sg_miter_next(&mo);
 			oo = 0;
 		}
-	} while (mo.length > 0);
+	} while (oleft > 0);
 
 	if (areq->info) {
 		for (i = 0; i < 4 && i < ivsize / 4; i++) {

drivers/gpio/Kconfig

@@ -356,7 +356,7 @@ config GPIO_PXA
 
 config GPIO_RCAR
 	tristate "Renesas R-Car GPIO"
-	depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support GPIO on Renesas R-Car SoCs.

drivers/gpio/gpio-mxc.c

@@ -339,13 +339,15 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 	return 0;
 }
 
-static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
+static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 {
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
 				    port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
 	gc->private = port;
 
 	ct = gc->chip_types;
@@ -360,6 +362,8 @@ static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
+
+	return 0;
 }
 
 static void mxc_gpio_get_hw(struct platform_device *pdev)
@@ -477,12 +481,16 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* gpio-mxc can be a generic irq chip */
-	mxc_gpio_init_gc(port, irq_base);
+	err = mxc_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
 
 	list_add_tail(&port->node, &mxc_gpio_ports);
 
 	return 0;
 
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
 out_irqdesc_free:
 	irq_free_descs(irq_base, 32);
 out_gpiochip_remove:

drivers/gpio/gpio-mxs.c

@@ -196,13 +196,16 @@ static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
 	return 0;
 }
 
-static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
+static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 {
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
 				    port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
+
 	gc->private = port;
 
 	ct = gc->chip_types;
@@ -216,6 +219,8 @@ static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
+
+	return 0;
 }
 
 static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
@@ -317,7 +322,9 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* gpio-mxs can be a generic irq chip */
-	mxs_gpio_init_gc(port, irq_base);
+	err = mxs_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
 
 	/* setup one handler for each entry */
 	irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
@@ -343,6 +350,8 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 
 out_bgpio_remove:
 	bgpio_remove(&port->bgc);
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
 out_irqdesc_free:
 	irq_free_descs(irq_base, 32);
 	return err;

drivers/gpio/gpio-omap.c

@@ -1098,7 +1098,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 	} else {
 		bank->chip.label = "gpio";
 		bank->chip.base = gpio;
-		gpio += bank->width;
 	}
 	bank->chip.ngpio = bank->width;
 
@@ -1108,6 +1107,9 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 		return ret;
 	}
 
+	if (!bank->is_mpuio)
+		gpio += bank->width;
+
 #ifdef CONFIG_ARCH_OMAP1
 	/*
 	 * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
@@ -1253,8 +1255,11 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	omap_gpio_mod_init(bank);
 
 	ret = omap_gpio_chip_init(bank, irqc);
-	if (ret)
+	if (ret) {
+		pm_runtime_put_sync(bank->dev);
+		pm_runtime_disable(bank->dev);
 		return ret;
+	}
 
 	omap_gpio_show_rev(bank);
 

drivers/gpio/gpio-sx150x.c

@@ -706,4 +706,3 @@ module_exit(sx150x_exit);
 MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
 MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:sx150x");

drivers/gpio/gpiolib.c

@@ -1174,15 +1174,16 @@ EXPORT_SYMBOL_GPL(gpiod_is_active_low);
  * that the GPIO was actually requested.
  */
 
-static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
+static int _gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	struct gpio_chip	*chip;
-	bool value;
 	int offset;
+	int value;
 
 	chip = desc->chip;
 	offset = gpio_chip_hwgpio(desc);
-	value = chip->get ? chip->get(chip, offset) : false;
+	value = chip->get ? chip->get(chip, offset) : -EIO;
+	value = value < 0 ? value : !!value;
 	trace_gpio_value(desc_to_gpio(desc), 1, value);
 	return value;
 }
@@ -1192,7 +1193,7 @@ static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
@@ -1212,7 +1213,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
  *
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
@@ -1226,6 +1227,9 @@ int gpiod_get_value(const struct gpio_desc *desc)
 	WARN_ON(desc->chip->can_sleep);
 
 	value = _gpiod_get_raw_value(desc);
+	if (value < 0)
+		return value;
+
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;
 
@@ -1548,7 +1552,7 @@ EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
  */
@@ -1566,7 +1570,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
  */
@@ -1579,6 +1583,9 @@ int gpiod_get_value_cansleep(const struct gpio_desc *desc)
 		return 0;
 
 	value = _gpiod_get_raw_value(desc);
+	if (value < 0)
+		return value;
+
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;
 

drivers/hwmon/Kconfig

@@ -1140,8 +1140,8 @@ config SENSORS_NCT6775
 	help
 	  If you say yes here you get support for the hardware monitoring
 	  functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
-	  NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
-	  replaces the w83627ehf driver for NCT6775F and NCT6776F.
+	  NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This
+	  driver replaces the w83627ehf driver for NCT6775F and NCT6776F.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called nct6775.

drivers/hwmon/nct6775.c

@@ -39,6 +39,7 @@
  * nct6779d    15      5       5       2+6    0xc560 0xc1    0x5ca3
  * nct6791d    15      6       6       2+6    0xc800 0xc1    0x5ca3
  * nct6792d    15      6       6       2+6    0xc910 0xc1    0x5ca3
+ * nct6793d    15      6       6       2+6    0xd120 0xc1    0x5ca3
  *
  * #temp lists the number of monitored temperature sources (first value) plus
  * the number of directly connectable temperature sensors (second value).
@@ -63,7 +64,7 @@
 
 #define USE_ALTERNATE
 
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792 };
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793 };
 
 /* used to set data->name = nct6775_device_names[data->sio_kind] */
 static const char * const nct6775_device_names[] = {
@@ -73,6 +74,17 @@ static const char * const nct6775_device_names[] = {
 	"nct6779",
 	"nct6791",
 	"nct6792",
+	"nct6793",
+};
+
+static const char * const nct6775_sio_names[] __initconst = {
+	"NCT6106D",
+	"NCT6775F",
+	"NCT6776D/F",
+	"NCT6779D",
+	"NCT6791D",
+	"NCT6792D",
+	"NCT6793D",
 };
 
 static unsigned short force_id;
@@ -104,6 +116,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define SIO_NCT6779_ID		0xc560
 #define SIO_NCT6791_ID		0xc800
 #define SIO_NCT6792_ID		0xc910
+#define SIO_NCT6793_ID		0xd120
 #define SIO_ID_MASK		0xFFF0
 
 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
@@ -354,6 +367,10 @@ static const u16 NCT6775_REG_TEMP_CRIT[ARRAY_SIZE(nct6775_temp_label) - 1]
 
 /* NCT6776 specific data */
 
+/* STEP_UP_TIME and STEP_DOWN_TIME regs are swapped for all chips but NCT6775 */
+#define NCT6776_REG_FAN_STEP_UP_TIME NCT6775_REG_FAN_STEP_DOWN_TIME
+#define NCT6776_REG_FAN_STEP_DOWN_TIME NCT6775_REG_FAN_STEP_UP_TIME
+
 static const s8 NCT6776_ALARM_BITS[] = {
 	0, 1, 2, 3, 8, 21, 20, 16,	/* in0.. in7 */
 	17, -1, -1, -1, -1, -1, -1,	/* in8..in14 */
@@ -533,7 +550,7 @@ static const s8 NCT6791_ALARM_BITS[] = {
 	4, 5, 13, -1, -1, -1,		/* temp1..temp6 */
 	12, 9 };			/* intrusion0, intrusion1 */
 
-/* NCT6792 specific data */
+/* NCT6792/NCT6793 specific data */
 
 static const u16 NCT6792_REG_TEMP_MON[] = {
 	0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d };
@@ -1056,6 +1073,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
 	case nct6779:
 	case nct6791:
 	case nct6792:
+	case nct6793:
 		return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
 		  ((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
 		  reg == 0x402 ||
@@ -1407,6 +1425,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
 		case nct6779:
 		case nct6791:
 		case nct6792:
+		case nct6793:
 			reg = nct6775_read_value(data,
 					data->REG_CRITICAL_PWM_ENABLE[i]);
 			if (reg & data->CRITICAL_PWM_ENABLE_MASK)
@@ -2822,6 +2841,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
 		case nct6779:
 		case nct6791:
 		case nct6792:
+		case nct6793:
 			nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
 					    val);
 			reg = nct6775_read_value(data,
@@ -3256,7 +3276,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		pwm4pin = false;
 		pwm5pin = false;
 		pwm6pin = false;
-	} else {	/* NCT6779D, NCT6791D, or NCT6792D */
+	} else {	/* NCT6779D, NCT6791D, NCT6792D, or NCT6793D */
 		regval = superio_inb(sioreg, 0x1c);
 
 		fan3pin = !(regval & (1 << 5));
@@ -3269,7 +3289,8 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
 		fan4min = fan4pin;
 
-		if (data->kind == nct6791 || data->kind == nct6792) {
+		if (data->kind == nct6791 || data->kind == nct6792 ||
+		    data->kind == nct6793) {
 			regval = superio_inb(sioreg, 0x2d);
 			fan6pin = (regval & (1 << 1));
 			pwm6pin = (regval & (1 << 0));
@@ -3528,8 +3549,8 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_PULSES = NCT6776_REG_FAN_PULSES;
 		data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
 		data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
-		data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
-		data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+		data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+		data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
 		data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6775_REG_PWM;
 		data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
@@ -3600,8 +3621,8 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
 		data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
 		data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
-		data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
-		data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+		data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+		data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
 		data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6775_REG_PWM;
 		data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
@@ -3643,6 +3664,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		break;
 	case nct6791:
 	case nct6792:
+	case nct6793:
 		data->in_num = 15;
 		data->pwm_num = 6;
 		data->auto_pwm_num = 4;
@@ -3677,8 +3699,8 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
 		data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
 		data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
-		data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
-		data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+		data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+		data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
 		data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6775_REG_PWM;
 		data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
@@ -3918,6 +3940,7 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6779:
 	case nct6791:
 	case nct6792:
+	case nct6793:
 		break;
 	}
 
@@ -3950,6 +3973,7 @@ static int nct6775_probe(struct platform_device *pdev)
 			break;
 		case nct6791:
 		case nct6792:
+		case nct6793:
 			tmp |= 0x7e;
 			break;
 		}
@@ -4047,7 +4071,8 @@ static int __maybe_unused nct6775_resume(struct device *dev)
 	if (reg != data->sio_reg_enable)
 		superio_outb(sioreg, SIO_REG_ENABLE, data->sio_reg_enable);
 
-	if (data->kind == nct6791 || data->kind == nct6792)
+	if (data->kind == nct6791 || data->kind == nct6792 ||
+	    data->kind == nct6793)
 		nct6791_enable_io_mapping(sioreg);
 
 	superio_exit(sioreg);
@@ -4106,15 +4131,6 @@ static struct platform_driver nct6775_driver = {
 	.probe		= nct6775_probe,
 };
 
-static const char * const nct6775_sio_names[] __initconst = {
-	"NCT6106D",
-	"NCT6775F",
-	"NCT6776D/F",
-	"NCT6779D",
-	"NCT6791D",
-	"NCT6792D",
-};
-
 /* nct6775_find() looks for a '627 in the Super-I/O config space */
 static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 {
@@ -4150,6 +4166,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 	case SIO_NCT6792_ID:
 		sio_data->kind = nct6792;
 		break;
+	case SIO_NCT6793_ID:
+		sio_data->kind = nct6793;
+		break;
 	default:
 		if (val != 0xffff)
 			pr_debug("unsupported chip ID: 0x%04x\n", val);
@@ -4175,7 +4194,8 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 		superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
 	}
 
-	if (sio_data->kind == nct6791 || sio_data->kind == nct6792)
+	if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
+	    sio_data->kind == nct6793)
 		nct6791_enable_io_mapping(sioaddr);
 
 	superio_exit(sioaddr);
@@ -4285,7 +4305,7 @@ static void __exit sensors_nct6775_exit(void)
 }
 
 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D/NCT6792D driver");
+MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips");
 MODULE_LICENSE("GPL");
 
 module_init(sensors_nct6775_init);

drivers/infiniband/Kconfig

@@ -56,7 +56,6 @@ config INFINIBAND_ADDR_TRANS
 
 source "drivers/infiniband/hw/mthca/Kconfig"
 source "drivers/infiniband/hw/qib/Kconfig"
-source "drivers/infiniband/hw/ehca/Kconfig"
 source "drivers/infiniband/hw/cxgb3/Kconfig"
 source "drivers/infiniband/hw/cxgb4/Kconfig"
 source "drivers/infiniband/hw/mlx4/Kconfig"

drivers/infiniband/hw/Makefile

 obj-$(CONFIG_INFINIBAND_MTHCA)		+= mthca/
 obj-$(CONFIG_INFINIBAND_QIB)		+= qib/
-obj-$(CONFIG_INFINIBAND_EHCA)		+= ehca/
 obj-$(CONFIG_INFINIBAND_CXGB3)		+= cxgb3/
 obj-$(CONFIG_INFINIBAND_CXGB4)		+= cxgb4/
 obj-$(CONFIG_MLX4_INFINIBAND)		+= mlx4/

drivers/pinctrl/core.c

@@ -349,6 +349,9 @@ static bool pinctrl_ready_for_gpio_range(unsigned gpio)
 	struct pinctrl_gpio_range *range = NULL;
 	struct gpio_chip *chip = gpio_to_chip(gpio);
 
+	if (WARN(!chip, "no gpio_chip for gpio%i?", gpio))
+		return false;
+
 	mutex_lock(&pinctrldev_list_mutex);
 
 	/* Loop over the pin controllers */

drivers/pinctrl/pinctrl-digicolor.c

@@ -337,9 +337,9 @@ static int dc_pinctrl_probe(struct platform_device *pdev)
 	pmap->dev = &pdev->dev;
 
 	pmap->pctl = pinctrl_register(pctl_desc, &pdev->dev, pmap);
-	if (!pmap->pctl) {
+	if (IS_ERR(pmap->pctl)) {
 		dev_err(&pdev->dev, "pinctrl driver registration failed\n");
-		return -EINVAL;
+		return PTR_ERR(pmap->pctl);
 	}
 
 	ret = dc_gpiochip_add(pmap, pdev->dev.of_node);

drivers/pinctrl/pinmux.c

@@ -313,8 +313,7 @@ static int pinmux_func_name_to_selector(struct pinctrl_dev *pctldev,
 
 	/* See if this pctldev has this function */
 	while (selector < nfuncs) {
-		const char *fname = ops->get_function_name(pctldev,
-							   selector);
+		const char *fname = ops->get_function_name(pctldev, selector);
 
 		if (!strcmp(function, fname))
 			return selector;

drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c

@@ -723,9 +723,9 @@ static int pm8xxx_gpio_probe(struct platform_device *pdev)
 #endif
 
 	pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl);
-	if (!pctrl->pctrl) {
+	if (IS_ERR(pctrl->pctrl)) {
 		dev_err(&pdev->dev, "couldn't register pm8xxx gpio driver\n");
-		return -ENODEV;
+		return PTR_ERR(pctrl->pctrl);
 	}
 
 	pctrl->chip = pm8xxx_gpio_template;

drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c

@@ -814,9 +814,9 @@ static int pm8xxx_mpp_probe(struct platform_device *pdev)
 #endif
 
 	pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl);
-	if (!pctrl->pctrl) {
+	if (IS_ERR(pctrl->pctrl)) {
 		dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n");
-		return -ENODEV;
+		return PTR_ERR(pctrl->pctrl);
 	}
 
 	pctrl->chip = pm8xxx_mpp_template;

drivers/pinctrl/samsung/pinctrl-s3c24xx.c

@@ -361,7 +361,7 @@ static inline void s3c24xx_demux_eint(struct irq_desc *desc,
 				      u32 offset, u32 range)
 {
 	struct s3c24xx_eint_data *data = irq_desc_get_handler_data(desc);
-	struct irq_chip *chip = irq_desc_get_irq_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct samsung_pinctrl_drv_data *d = data->drvdata;
 	unsigned int pend, mask;
 

drivers/platform/x86/asus-nb-wmi.c

@@ -126,6 +126,24 @@ static const struct dmi_system_id asus_quirks[] = {
 		},
 		.driver_data = &quirk_asus_wapf4,
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X456UA",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X456UA"),
+		},
+		.driver_data = &quirk_asus_wapf4,
+	},
+	{
+		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X456UF",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X456UF"),
+		},
+		.driver_data = &quirk_asus_wapf4,
+	},
 	{
 		.callback = dmi_matched,
 		.ident = "ASUSTeK COMPUTER INC. X501U",

drivers/platform/x86/hp-wmi.c

@@ -54,8 +54,9 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_HARDWARE_QUERY 0x4
 #define HPWMI_WIRELESS_QUERY 0x5
 #define HPWMI_BIOS_QUERY 0x9
+#define HPWMI_FEATURE_QUERY 0xb
 #define HPWMI_HOTKEY_QUERY 0xc
-#define HPWMI_FEATURE_QUERY 0xd
+#define HPWMI_FEATURE2_QUERY 0xd
 #define HPWMI_WIRELESS2_QUERY 0x1b
 #define HPWMI_POSTCODEERROR_QUERY 0x2a
 
@@ -295,25 +296,33 @@ static int hp_wmi_tablet_state(void)
 	return (state & 0x4) ? 1 : 0;
 }
 
-static int __init hp_wmi_bios_2009_later(void)
+static int __init hp_wmi_bios_2008_later(void)
 {
 	int state = 0;
 	int ret = hp_wmi_perform_query(HPWMI_FEATURE_QUERY, 0, &state,
 				       sizeof(state), sizeof(state));
-	if (ret)
-		return ret;
+	if (!ret)
+		return 1;
 
-	return (state & 0x10) ? 1 : 0;
+	return (ret == HPWMI_RET_UNKNOWN_CMDTYPE) ? 0 : -ENXIO;
 }
 
-static int hp_wmi_enable_hotkeys(void)
+static int __init hp_wmi_bios_2009_later(void)
 {
-	int ret;
-	int query = 0x6e;
+	int state = 0;
+	int ret = hp_wmi_perform_query(HPWMI_FEATURE2_QUERY, 0, &state,
+				       sizeof(state), sizeof(state));
+	if (!ret)
+		return 1;
 
-	ret = hp_wmi_perform_query(HPWMI_BIOS_QUERY, 1, &query, sizeof(query),
-				   0);
+	return (ret == HPWMI_RET_UNKNOWN_CMDTYPE) ? 0 : -ENXIO;
+}
 
+static int __init hp_wmi_enable_hotkeys(void)
+{
+	int value = 0x6e;
+	int ret = hp_wmi_perform_query(HPWMI_BIOS_QUERY, 1, &value,
+				       sizeof(value), 0);
 	if (ret)
 		return -EINVAL;
 	return 0;
@@ -663,7 +672,7 @@ static int __init hp_wmi_input_setup(void)
 			    hp_wmi_tablet_state());
 	input_sync(hp_wmi_input_dev);
 
-	if (hp_wmi_bios_2009_later() == 4)
+	if (!hp_wmi_bios_2009_later() && hp_wmi_bios_2008_later())
 		hp_wmi_enable_hotkeys();
 
 	status = wmi_install_notify_handler(HPWMI_EVENT_GUID, hp_wmi_notify, NULL);

drivers/platform/x86/toshiba_acpi.c

@@ -938,7 +938,7 @@ static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state)
 	else if (result == TOS_NOT_SUPPORTED)
 		return -ENODEV;
 
-	return result = TOS_SUCCESS ? 0 : -EIO;
+	return result == TOS_SUCCESS ? 0 : -EIO;
 }
 
 static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state)
@@ -2398,11 +2398,9 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 	if (error)
 		return error;
 
-	error = toshiba_hotkey_event_type_get(dev, &events_type);
-	if (error) {
-		pr_err("Unable to query Hotkey Event Type\n");
-		return error;
-	}
+	if (toshiba_hotkey_event_type_get(dev, &events_type))
+		pr_notice("Unable to query Hotkey Event Type\n");
+
 	dev->hotkey_event_type = events_type;
 
 	dev->hotkey_dev = input_allocate_device();

drivers/platform/x86/wmi.c

@@ -194,34 +194,6 @@ static bool wmi_parse_guid(const u8 *src, u8 *dest)
 	return true;
 }
 
-/*
- * Convert a raw GUID to the ACII string representation
- */
-static int wmi_gtoa(const char *in, char *out)
-{
-	int i;
-
-	for (i = 3; i >= 0; i--)
-		out += sprintf(out, "%02X", in[i] & 0xFF);
-
-	out += sprintf(out, "-");
-	out += sprintf(out, "%02X", in[5] & 0xFF);
-	out += sprintf(out, "%02X", in[4] & 0xFF);
-	out += sprintf(out, "-");
-	out += sprintf(out, "%02X", in[7] & 0xFF);
-	out += sprintf(out, "%02X", in[6] & 0xFF);
-	out += sprintf(out, "-");
-	out += sprintf(out, "%02X", in[8] & 0xFF);
-	out += sprintf(out, "%02X", in[9] & 0xFF);
-	out += sprintf(out, "-");
-
-	for (i = 10; i <= 15; i++)
-		out += sprintf(out, "%02X", in[i] & 0xFF);
-
-	*out = '\0';
-	return 0;
-}
-
 static bool find_guid(const char *guid_string, struct wmi_block **out)
 {
 	char tmp[16], guid_input[16];
@@ -457,11 +429,7 @@ EXPORT_SYMBOL_GPL(wmi_set_block);
 
 static void wmi_dump_wdg(const struct guid_block *g)
 {
-	char guid_string[37];
-
-	wmi_gtoa(g->guid, guid_string);
-
-	pr_info("%s:\n", guid_string);
+	pr_info("%pUL:\n", g->guid);
 	pr_info("\tobject_id: %c%c\n", g->object_id[0], g->object_id[1]);
 	pr_info("\tnotify_id: %02X\n", g->notify_id);
 	pr_info("\treserved: %02X\n", g->reserved);
@@ -661,7 +629,6 @@ EXPORT_SYMBOL_GPL(wmi_has_guid);
 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	char guid_string[37];
 	struct wmi_block *wblock;
 
 	wblock = dev_get_drvdata(dev);
@@ -670,9 +637,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 		return strlen(buf);
 	}
 
-	wmi_gtoa(wblock->gblock.guid, guid_string);
-
-	return sprintf(buf, "wmi:%s\n", guid_string);
+	return sprintf(buf, "wmi:%pUL\n", wblock->gblock.guid);
 }
 static DEVICE_ATTR_RO(modalias);
 
@@ -695,7 +660,7 @@ static int wmi_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 	if (!wblock)
 		return -ENOMEM;
 
-	wmi_gtoa(wblock->gblock.guid, guid_string);
+	sprintf(guid_string, "%pUL", wblock->gblock.guid);
 
 	strcpy(&env->buf[env->buflen - 1], "wmi:");
 	memcpy(&env->buf[env->buflen - 1 + 4], guid_string, 36);
@@ -721,12 +686,9 @@ static struct class wmi_class = {
 static int wmi_create_device(const struct guid_block *gblock,
 			     struct wmi_block *wblock, acpi_handle handle)
 {
-	char guid_string[37];
-
 	wblock->dev.class = &wmi_class;
 
-	wmi_gtoa(gblock->guid, guid_string);
-	dev_set_name(&wblock->dev, "%s", guid_string);
+	dev_set_name(&wblock->dev, "%pUL", gblock->guid);
 
 	dev_set_drvdata(&wblock->dev, wblock);
 
@@ -877,7 +839,6 @@ static void acpi_wmi_notify(struct acpi_device *device, u32 event)
 	struct guid_block *block;
 	struct wmi_block *wblock;
 	struct list_head *p;
-	char guid_string[37];
 
 	list_for_each(p, &wmi_block_list) {
 		wblock = list_entry(p, struct wmi_block, list);
@@ -888,8 +849,8 @@ static void acpi_wmi_notify(struct acpi_device *device, u32 event)
 			if (wblock->handler)
 				wblock->handler(event, wblock->handler_data);
 			if (debug_event) {
-				wmi_gtoa(wblock->gblock.guid, guid_string);
-				pr_info("DEBUG Event GUID: %s\n", guid_string);
+				pr_info("DEBUG Event GUID: %pUL\n",
+					wblock->gblock.guid);
 			}
 
 			acpi_bus_generate_netlink_event(

drivers/power/twl4030_charger.c

@@ -91,7 +91,7 @@
 #define TWL4030_MSTATEC_COMPLETE1	0x0b
 #define TWL4030_MSTATEC_COMPLETE4	0x0e
 
-#if IS_ENABLED(CONFIG_TWL4030_MADC)
+#if IS_REACHABLE(CONFIG_TWL4030_MADC)
 /*
  * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
  * then AC is available.
@@ -1057,13 +1057,9 @@ static int twl4030_bci_probe(struct platform_device *pdev)
 
 		phynode = of_find_compatible_node(bci->dev->of_node->parent,
 						  NULL, "ti,twl4030-usb");
-		if (phynode) {
+		if (phynode)
 			bci->transceiver = devm_usb_get_phy_by_node(
 				bci->dev, phynode, &bci->usb_nb);
-			if (IS_ERR(bci->transceiver) &&
-			    PTR_ERR(bci->transceiver) == -EPROBE_DEFER)
-				return -EPROBE_DEFER;
-		}
 	}
 
 	/* Enable interrupts now. */

drivers/staging/rdma/Kconfig

@@ -24,6 +24,8 @@ if STAGING_RDMA
 
 source "drivers/staging/rdma/amso1100/Kconfig"
 
+source "drivers/staging/rdma/ehca/Kconfig"
+
 source "drivers/staging/rdma/hfi1/Kconfig"
 
 source "drivers/staging/rdma/ipath/Kconfig"

drivers/staging/rdma/Makefile

 # Entries for RDMA_STAGING tree
 obj-$(CONFIG_INFINIBAND_AMSO1100)	+= amso1100/
+obj-$(CONFIG_INFINIBAND_EHCA)	+= ehca/
 obj-$(CONFIG_INFINIBAND_HFI1)	+= hfi1/
 obj-$(CONFIG_INFINIBAND_IPATH)	+= ipath/

drivers/infiniband/hw/ehca/Kconfig → drivers/staging/rdma/ehca/Kconfig

@@ -2,7 +2,8 @@ config INFINIBAND_EHCA
 	tristate "eHCA support"
 	depends on IBMEBUS
 	---help---
-	This driver supports the IBM pSeries eHCA InfiniBand adapter.
+	This driver supports the deprecated IBM pSeries eHCA InfiniBand
+	adapter.
 
 	To compile the driver as a module, choose M here. The module
 	will be called ib_ehca.

drivers/staging/rdma/ehca/TODO

+9/2015
+
+The ehca driver has been deprecated and moved to drivers/staging/rdma.
+It will be removed in the 4.6 merge window.