提交 d614cb0b 编写于 作者: L Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A smaller set of fixes this week, and all regression fixes:
   - a handful of issues fixed on at91 with common clock conversion
   - a set of fixes for Marvell mvebu (SMP, coherency, PM)
   - a clock fix for i.MX6Q.
   - ... and a SMP/hotplug fix for Exynos"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: EXYNOS: Fix core ID used by platsmp and hotplug code
  ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi
  ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi
  ARM: at91: at91sam9x5: correct typo error for ohci clock
  ARM: clk-imx6q: parent lvds_sel input from upstream clock gates
  ARM: mvebu: Fix coherency bus notifiers by using separate notifiers
  ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter
  ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian
......@@ -925,7 +925,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
......
......@@ -1124,6 +1124,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
clocks = <&pwm_clk>;
#pwm-cells = <3>;
status = "disabled";
};
......@@ -1155,8 +1156,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
<&uhpck>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
......
......@@ -40,15 +40,17 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
for (;;) {
/* make cpu1 to be turned off at next WFI command */
if (cpu == 1)
exynos_cpu_power_down(cpu);
/* Turn the CPU off on next WFI instruction. */
exynos_cpu_power_down(core_id);
wfi();
if (pen_release == cpu_logical_map(cpu)) {
if (pen_release == core_id) {
/*
* OK, proper wakeup, we're done
*/
......
......@@ -90,7 +90,8 @@ static void exynos_secondary_init(unsigned int cpu)
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
unsigned long phys_cpu = cpu_logical_map(cpu);
u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
int ret = -ENOSYS;
/*
......@@ -104,17 +105,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*
* Note that "pen_release" is the hardware CPU ID, whereas
* Note that "pen_release" is the hardware CPU core ID, whereas
* "cpu" is Linux's internal ID.
*/
write_pen_release(phys_cpu);
write_pen_release(core_id);
if (!exynos_cpu_power_state(cpu)) {
exynos_cpu_power_up(cpu);
if (!exynos_cpu_power_state(core_id)) {
exynos_cpu_power_up(core_id);
timeout = 10;
/* wait max 10 ms until cpu1 is on */
while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
while (exynos_cpu_power_state(core_id)
!= S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
......@@ -145,20 +147,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Try to set boot address using firmware first
* and fall back to boot register if it fails.
*/
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
goto fail;
if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg)) {
ret = PTR_ERR(boot_reg);
goto fail;
}
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
__raw_writel(boot_addr, cpu_boot_reg(core_id));
}
call_firmware_op(cpu_boot, phys_cpu);
call_firmware_op(cpu_boot, core_id);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
......@@ -227,22 +229,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
* boot register if it fails.
*/
for (i = 1; i < max_cpus; ++i) {
unsigned long phys_cpu;
unsigned long boot_addr;
u32 mpidr;
u32 core_id;
int ret;
phys_cpu = cpu_logical_map(i);
mpidr = cpu_logical_map(i);
core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup);
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
break;
if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg))
break;
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
__raw_writel(boot_addr, cpu_boot_reg(core_id));
}
}
}
......
......@@ -70,7 +70,7 @@ static const char *cko_sels[] = { "cko1", "cko2", };
static const char *lvds_sels[] = {
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
"pcie_ref", "sata_ref",
"pcie_ref_125m", "sata_ref_100m",
};
enum mx6q_clks {
......@@ -491,7 +491,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
clk_set_parent(clk[lvds1_sel], clk[sata_ref_100m]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
......
......@@ -292,6 +292,10 @@ static struct notifier_block mvebu_hwcc_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
static struct notifier_block mvebu_hwcc_pci_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
......@@ -427,7 +431,7 @@ static int __init coherency_pci_init(void)
{
if (coherency_available())
bus_register_notifier(&pci_bus_type,
&mvebu_hwcc_nb);
&mvebu_hwcc_pci_nb);
return 0;
}
......
......@@ -15,6 +15,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
__CPUINIT
#define CPU_RESUME_ADDR_REG 0xf10182d4
......@@ -22,13 +24,18 @@
.global armada_375_smp_cpu1_enable_code_end
armada_375_smp_cpu1_enable_code_start:
ldr r0, [pc, #4]
ARM_BE8(setend be)
adr r0, 1f
ldr r0, [r0]
ldr r1, [r0]
ARM_BE8(rev r1, r1)
mov pc, r1
1:
.word CPU_RESUME_ADDR_REG
armada_375_smp_cpu1_enable_code_end:
ENTRY(mvebu_cortex_a9_secondary_startup)
ARM_BE8(setend be)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)
......@@ -201,12 +201,12 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
"mrc p15, 0, %0, c1, c0, 0 \n\t"
"tst %0, #(1 << 2) \n\t"
"orreq %0, %0, #(1 << 2) \n\t"
"mcreq p15, 0, %0, c1, c0, 0 \n\t"
"mrc p15, 0, r0, c1, c0, 0 \n\t"
"tst r0, #(1 << 2) \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
: : "r" (0));
: : : "r0");
pr_warn("Failed to suspend the system\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册