提交 d5c065e3 编写于 作者: D David S. Miller

Merge branch 'sh_eth'

Sergei Shtylyov says:

====================
Beautify 'sh_eth' driver's messages

This patchset converts te driver to using netdev_*() and netif_*() to print out
its messages whenever possible.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -400,7 +400,8 @@ static void sh_eth_select_mii(struct net_device *ndev)
value = 0x0;
break;
default:
pr_warn("PHY interface mode was not setup. Set to MII.\n");
netdev_warn(ndev,
"PHY interface mode was not setup. Set to MII.\n");
value = 0x1;
break;
}
......@@ -854,7 +855,7 @@ static int sh_eth_check_reset(struct net_device *ndev)
cnt--;
}
if (cnt <= 0) {
pr_err("Device reset failed\n");
netdev_err(ndev, "Device reset failed\n");
ret = -ETIMEDOUT;
}
return ret;
......@@ -1556,8 +1557,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
/* Unused write back interrupt */
if (intr_status & EESR_TABT) { /* Transmit Abort int */
ndev->stats.tx_aborted_errors++;
if (netif_msg_tx_err(mdp))
dev_err(&ndev->dev, "Transmit Abort\n");
netif_err(mdp, tx_err, ndev, "Transmit Abort\n");
}
}
......@@ -1566,45 +1566,38 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
if (intr_status & EESR_RFRMER) {
/* Receive Frame Overflow int */
ndev->stats.rx_frame_errors++;
if (netif_msg_rx_err(mdp))
dev_err(&ndev->dev, "Receive Abort\n");
netif_err(mdp, rx_err, ndev, "Receive Abort\n");
}
}
if (intr_status & EESR_TDE) {
/* Transmit Descriptor Empty int */
ndev->stats.tx_fifo_errors++;
if (netif_msg_tx_err(mdp))
dev_err(&ndev->dev, "Transmit Descriptor Empty\n");
netif_err(mdp, tx_err, ndev, "Transmit Descriptor Empty\n");
}
if (intr_status & EESR_TFE) {
/* FIFO under flow */
ndev->stats.tx_fifo_errors++;
if (netif_msg_tx_err(mdp))
dev_err(&ndev->dev, "Transmit FIFO Under flow\n");
netif_err(mdp, tx_err, ndev, "Transmit FIFO Under flow\n");
}
if (intr_status & EESR_RDE) {
/* Receive Descriptor Empty int */
ndev->stats.rx_over_errors++;
if (netif_msg_rx_err(mdp))
dev_err(&ndev->dev, "Receive Descriptor Empty\n");
netif_err(mdp, rx_err, ndev, "Receive Descriptor Empty\n");
}
if (intr_status & EESR_RFE) {
/* Receive FIFO Overflow int */
ndev->stats.rx_fifo_errors++;
if (netif_msg_rx_err(mdp))
dev_err(&ndev->dev, "Receive FIFO Overflow\n");
netif_err(mdp, rx_err, ndev, "Receive FIFO Overflow\n");
}
if (!mdp->cd->no_ade && (intr_status & EESR_ADE)) {
/* Address Error */
ndev->stats.tx_fifo_errors++;
if (netif_msg_tx_err(mdp))
dev_err(&ndev->dev, "Address Error\n");
netif_err(mdp, tx_err, ndev, "Address Error\n");
}
mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
......@@ -1615,9 +1608,9 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
u32 edtrr = sh_eth_read(ndev, EDTRR);
/* dmesg */
dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
intr_status, mdp->cur_tx, mdp->dirty_tx,
(u32)ndev->state, edtrr);
netdev_err(ndev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
intr_status, mdp->cur_tx, mdp->dirty_tx,
(u32)ndev->state, edtrr);
/* dirty buffer free */
sh_eth_txfree(ndev);
......@@ -1662,9 +1655,9 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
EESIPR);
__napi_schedule(&mdp->napi);
} else {
dev_warn(&ndev->dev,
"ignoring interrupt, status 0x%08lx, mask 0x%08lx.\n",
intr_status, intr_enable);
netdev_warn(ndev,
"ignoring interrupt, status 0x%08lx, mask 0x%08lx.\n",
intr_status, intr_enable);
}
}
......@@ -1793,12 +1786,12 @@ static int sh_eth_phy_init(struct net_device *ndev)
}
if (IS_ERR(phydev)) {
dev_err(&ndev->dev, "failed to connect PHY\n");
netdev_err(ndev, "failed to connect PHY\n");
return PTR_ERR(phydev);
}
dev_info(&ndev->dev, "attached PHY %d (IRQ %d) to driver %s\n",
phydev->addr, phydev->irq, phydev->drv->name);
netdev_info(ndev, "attached PHY %d (IRQ %d) to driver %s\n",
phydev->addr, phydev->irq, phydev->drv->name);
mdp->phydev = phydev;
......@@ -1979,12 +1972,12 @@ static int sh_eth_set_ringparam(struct net_device *ndev,
ret = sh_eth_ring_init(ndev);
if (ret < 0) {
dev_err(&ndev->dev, "%s: sh_eth_ring_init failed.\n", __func__);
netdev_err(ndev, "%s: sh_eth_ring_init failed.\n", __func__);
return ret;
}
ret = sh_eth_dev_init(ndev, false);
if (ret < 0) {
dev_err(&ndev->dev, "%s: sh_eth_dev_init failed.\n", __func__);
netdev_err(ndev, "%s: sh_eth_dev_init failed.\n", __func__);
return ret;
}
......@@ -2025,7 +2018,7 @@ static int sh_eth_open(struct net_device *ndev)
ret = request_irq(ndev->irq, sh_eth_interrupt,
mdp->cd->irq_flags, ndev->name, ndev);
if (ret) {
dev_err(&ndev->dev, "Can not assign IRQ number\n");
netdev_err(ndev, "Can not assign IRQ number\n");
goto out_napi_off;
}
......@@ -2063,10 +2056,9 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
netif_stop_queue(ndev);
if (netif_msg_timer(mdp)) {
dev_err(&ndev->dev, "%s: transmit timed out, status %8.8x, resetting...\n",
ndev->name, (int)sh_eth_read(ndev, EESR));
}
netif_err(mdp, timer, ndev,
"transmit timed out, status %8.8x, resetting...\n",
(int)sh_eth_read(ndev, EESR));
/* tx_errors count up */
ndev->stats.tx_errors++;
......@@ -2101,8 +2093,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
spin_lock_irqsave(&mdp->lock, flags);
if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
if (!sh_eth_txfree(ndev)) {
if (netif_msg_tx_queued(mdp))
dev_warn(&ndev->dev, "TxFD exhausted.\n");
netif_warn(mdp, tx_queued, ndev, "TxFD exhausted.\n");
netif_stop_queue(ndev);
spin_unlock_irqrestore(&mdp->lock, flags);
return NETDEV_TX_BUSY;
......@@ -2272,7 +2263,7 @@ static int sh_eth_tsu_busy(struct net_device *ndev)
udelay(10);
timeout--;
if (timeout <= 0) {
dev_err(&ndev->dev, "%s: timeout\n", __func__);
netdev_err(ndev, "%s: timeout\n", __func__);
return -ETIMEDOUT;
}
}
......@@ -2924,8 +2915,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
}
/* print device information */
pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
(u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
netdev_info(ndev, "Base address at 0x%x, %pM, IRQ %d.\n",
(u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
platform_set_drvdata(pdev, ndev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册