arm: dts: Remove p1010-flexcan compatible from imx series dts

The flexcan driver has been modified to check for big-endian dts
property for be read/write to flexcan registers/mb.

An exception to this rule is powerpc P1010RDB, which is always
big-endian, even if big-endian is not present in dts. This is
checked using p1010-flexcan compatible in dts.

Therefore, remove p1010-flexcan compatible from imx series dts,
as their flexcan core is little endian.
Signed-off-by: NPankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

arch/arm/boot/dts/imx25.dtsi

@@ -122,7 +122,7 @@
 			};
 
 			can1: can@43f88000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx25-flexcan";
 				reg = <0x43f88000 0x4000>;
 				interrupts = <43>;
 				clocks = <&clks 75>, <&clks 75>;
@@ -131,7 +131,7 @@
 			};
 
 			can2: can@43f8c000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx25-flexcan";
 				reg = <0x43f8c000 0x4000>;
 				interrupts = <44>;
 				clocks = <&clks 76>, <&clks 76>;

arch/arm/boot/dts/imx28.dtsi

@@ -1038,7 +1038,7 @@
 			};
 
 			can0: can@80032000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx28-flexcan";
 				reg = <0x80032000 0x2000>;
 				interrupts = <8>;
 				clocks = <&clks 58>, <&clks 58>;
@@ -1047,7 +1047,7 @@
 			};
 
 			can1: can@80034000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx28-flexcan";
 				reg = <0x80034000 0x2000>;
 				interrupts = <9>;
 				clocks = <&clks 59>, <&clks 59>;

arch/arm/boot/dts/imx35.dtsi

@@ -303,7 +303,7 @@
 			};
 
 			can1: can@53fe4000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx35-flexcan";
 				reg = <0x53fe4000 0x1000>;
 				clocks = <&clks 33>, <&clks 33>;
 				clock-names = "ipg", "per";
@@ -312,7 +312,7 @@
 			};
 
 			can2: can@53fe8000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx35-flexcan";
 				reg = <0x53fe8000 0x1000>;
 				clocks = <&clks 34>, <&clks 34>;
 				clock-names = "ipg", "per";

arch/arm/boot/dts/imx53.dtsi

@@ -545,7 +545,7 @@
 			};
 
 			can1: can@53fc8000 {
-				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx53-flexcan";
 				reg = <0x53fc8000 0x4000>;
 				interrupts = <82>;
 				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
@@ -555,7 +555,7 @@
 			};
 
 			can2: can@53fcc000 {
-				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx53-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
 				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,