EDAC, i10nm: Add a driver for Intel 10nm server processors

This driver supports the Intel 10nm series server integrated memory
controller. It gets the memory capacity and topology information by
reading the registers in PCI configuration space and memory-mapped I/O.

It decodes the memory error address to the platform specific address
by using the ACPI Address Translation (ADXL) Device Specific Method
(DSM).
Co-developed-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-5-tony.luck@intel.com

drivers/edac/Kconfig

@@ -241,6 +241,18 @@ config EDAC_SKX
 	  system has non-volatile DIMMs you should also manually
 	  select CONFIG_ACPI_NFIT.
 
+config EDAC_I10NM
+	tristate "Intel 10nm server Integrated MC"
+	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
+	depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y
+	select DMI
+	select ACPI_ADXL if ACPI
+	help
+	  Support for error detection and correction the Intel
+	  10nm server Integrated Memory Controllers. If your
+	  system has non-volatile DIMMs you should also manually
+	  select CONFIG_ACPI_NFIT.
+
 config EDAC_PND2
 	tristate "Intel Pondicherry2"
 	depends on PCI && X86_64 && X86_MCE_INTEL

drivers/edac/Makefile

@@ -60,6 +60,9 @@ obj-$(CONFIG_EDAC_LAYERSCAPE)		+= layerscape_edac_mod.o
 skx_edac-y				:= skx_common.o skx_base.o
 obj-$(CONFIG_EDAC_SKX)			+= skx_edac.o
 
+i10nm_edac-y				:= skx_common.o i10nm_base.o
+obj-$(CONFIG_EDAC_I10NM)		+= i10nm_edac.o
+
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
 obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
 obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o

drivers/edac/i10nm_base.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Intel(R) 10nm server memory controller.
+ * Copyright (c) 2019, Intel Corporation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/mce.h>
+#include "edac_module.h"
+#include "skx_common.h"
+
+#define I10NM_REVISION	"v0.0.3"
+#define EDAC_MOD_STR	"i10nm_edac"
+
+/* Debug macros */
+#define i10nm_printk(level, fmt, arg...)	\
+	edac_printk(level, "i10nm", fmt, ##arg)
+
+#define I10NM_GET_SCK_BAR(d, reg)		\
+	pci_read_config_dword((d)->uracu, 0xd0, &(reg))
+#define I10NM_GET_IMC_BAR(d, i, reg)	\
+	pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg))
+#define I10NM_GET_DIMMMTR(m, i, j)	\
+	(*(u32 *)((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4))
+#define I10NM_GET_MCDDRTCFG(m, i, j)	\
+	(*(u32 *)((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4))
+
+#define I10NM_GET_SCK_MMIO_BASE(reg)	(GET_BITFIELD(reg, 0, 28) << 23)
+#define I10NM_GET_IMC_MMIO_OFFSET(reg)	(GET_BITFIELD(reg, 0, 10) << 12)
+#define I10NM_GET_IMC_MMIO_SIZE(reg)	((GET_BITFIELD(reg, 13, 23) - \
+					 GET_BITFIELD(reg, 0, 10) + 1) << 12)
+
+static struct list_head *i10nm_edac_list;
+
+static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus,
+					   unsigned int dev, unsigned int fun)
+{
+	struct pci_dev *pdev;
+
+	pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun));
+	if (!pdev) {
+		edac_dbg(2, "No device %02x:%02x.%x\n",
+			 bus, dev, fun);
+		return NULL;
+	}
+
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		edac_dbg(2, "Failed to enable device %02x:%02x.%x\n",
+			 bus, dev, fun);
+		return NULL;
+	}
+
+	pci_dev_get(pdev);
+
+	return pdev;
+}
+
+static int i10nm_get_all_munits(void)
+{
+	struct pci_dev *mdev;
+	void __iomem *mbase;
+	unsigned long size;
+	struct skx_dev *d;
+	int i, j = 0;
+	u32 reg, off;
+	u64 base;
+
+	list_for_each_entry(d, i10nm_edac_list, list) {
+		d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1);
+		if (!d->util_all)
+			return -ENODEV;
+
+		d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1);
+		if (!d->uracu)
+			return -ENODEV;
+
+		if (I10NM_GET_SCK_BAR(d, reg)) {
+			i10nm_printk(KERN_ERR, "Failed to socket bar\n");
+			return -ENODEV;
+		}
+
+		base = I10NM_GET_SCK_MMIO_BASE(reg);
+		edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n",
+			 j++, base, reg);
+
+		for (i = 0; i < I10NM_NUM_IMC; i++) {
+			mdev = pci_get_dev_wrapper(d->seg, d->bus[0],
+						   12 + i, 0);
+			if (i == 0 && !mdev) {
+				i10nm_printk(KERN_ERR, "No IMC found\n");
+				return -ENODEV;
+			}
+			if (!mdev)
+				continue;
+
+			d->imc[i].mdev = mdev;
+
+			if (I10NM_GET_IMC_BAR(d, i, reg)) {
+				i10nm_printk(KERN_ERR, "Failed to get mc bar\n");
+				return -ENODEV;
+			}
+
+			off  = I10NM_GET_IMC_MMIO_OFFSET(reg);
+			size = I10NM_GET_IMC_MMIO_SIZE(reg);
+			edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n",
+				 i, base + off, size, reg);
+
+			mbase = ioremap(base + off, size);
+			if (!mbase) {
+				i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n",
+					     base + off);
+				return -ENODEV;
+			}
+
+			d->imc[i].mbase = mbase;
+		}
+	}
+
+	return 0;
+}
+
+static const struct x86_cpu_id i10nm_cpuids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_TREMONT_X, 0, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids);
+
+static bool i10nm_check_ecc(struct skx_imc *imc, int chan)
+{
+	u32 mcmtr;
+
+	mcmtr = *(u32 *)(imc->mbase + 0x20ef8 + chan * 0x4000);
+	edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr);
+
+	return !!GET_BITFIELD(mcmtr, 2, 2);
+}
+
+static int i10nm_get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct skx_pvt *pvt = mci->pvt_info;
+	struct skx_imc *imc = pvt->imc;
+	struct dimm_info *dimm;
+	u32 mtr, mcddrtcfg;
+	int i, j, ndimms;
+
+	for (i = 0; i < I10NM_NUM_CHANNELS; i++) {
+		if (!imc->mbase)
+			continue;
+
+		ndimms = 0;
+		for (j = 0; j < I10NM_NUM_DIMMS; j++) {
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+					     mci->n_layers, i, j, 0);
+			mtr = I10NM_GET_DIMMMTR(imc, i, j);
+			mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i, j);
+			edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n",
+				 mtr, mcddrtcfg, imc->mc, i, j);
+
+			if (IS_DIMM_PRESENT(mtr))
+				ndimms += skx_get_dimm_info(mtr, 0, dimm,
+							    imc, i, j);
+			else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
+				ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
+							      EDAC_MOD_STR);
+		}
+		if (ndimms && !i10nm_check_ecc(imc, 0)) {
+			i10nm_printk(KERN_ERR, "ECC is disabled on imc %d\n",
+				     imc->mc);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static struct notifier_block i10nm_mce_dec = {
+	.notifier_call	= skx_mce_check_error,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+static int __init i10nm_init(void)
+{
+	u8 mc = 0, src_id = 0, node_id = 0;
+	const struct x86_cpu_id *id;
+	const char *owner;
+	struct skx_dev *d;
+	int rc, i, off[3] = {0xd0, 0xc8, 0xcc};
+	u64 tolm, tohm;
+
+	edac_dbg(2, "\n");
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	id = x86_match_cpu(i10nm_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm);
+	if (rc)
+		return rc;
+
+	rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list);
+	if (rc < 0)
+		goto fail;
+	if (rc == 0) {
+		i10nm_printk(KERN_ERR, "No memory controllers found\n");
+		return -ENODEV;
+	}
+
+	rc = i10nm_get_all_munits();
+	if (rc < 0)
+		goto fail;
+
+	list_for_each_entry(d, i10nm_edac_list, list) {
+		rc = skx_get_src_id(d, &src_id);
+		if (rc < 0)
+			goto fail;
+
+		rc = skx_get_node_id(d, &node_id);
+		if (rc < 0)
+			goto fail;
+
+		edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id);
+		for (i = 0; i < I10NM_NUM_IMC; i++) {
+			if (!d->imc[i].mdev)
+				continue;
+
+			d->imc[i].mc  = mc++;
+			d->imc[i].lmc = i;
+			d->imc[i].src_id  = src_id;
+			d->imc[i].node_id = node_id;
+
+			rc = skx_register_mci(&d->imc[i], d->imc[i].mdev,
+					      "Intel_10nm Socket", EDAC_MOD_STR,
+					      i10nm_get_dimm_config);
+			if (rc < 0)
+				goto fail;
+		}
+	}
+
+	rc = skx_adxl_get();
+	if (rc)
+		goto fail;
+
+	opstate_init();
+	mce_register_decode_chain(&i10nm_mce_dec);
+	setup_skx_debug("i10nm_test");
+
+	i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION);
+
+	return 0;
+fail:
+	skx_remove();
+	return rc;
+}
+
+static void __exit i10nm_exit(void)
+{
+	edac_dbg(2, "\n");
+	teardown_skx_debug();
+	mce_unregister_decode_chain(&i10nm_mce_dec);
+	skx_adxl_put();
+	skx_remove();
+}
+
+module_init(i10nm_init);
+module_exit(i10nm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors");