Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 d4cd1581 编写于 作者: A Andrey Smirnov 提交者： Shawn Guo
浏览文件
操作

ARM: dts: vf610-zii-dev: Add .dts file for rev. C 

Add .dts file for rev. C of the board by factoring out commonalities
into a shared include file (vf610-zii-dev-rev-b-c.dtsi) and deriving
revision specific file from it (vf610-zii-dev-rev-b.dts and
vf610-zii-dev-reb-c.dts).

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: andrew@lunn.ch
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: cphealy@gmail.com
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
上级 73f2e659
隐藏空白更改
内联 并排
Showing with 813 addition and 302 deletion
arch/arm/boot/dts/Makefile
浏览文件 @ d4cd1581
...@@ -463,7 +463,8 @@ dtb-$(CONFIG_SOC_VF610) += \ ...@@ -463,7 +463,8 @@ dtb-$(CONFIG_SOC_VF610) += \
vf610-cosmic.dtb \ vf610-cosmic.dtb \
vf610m4-cosmic.dtb \ vf610m4-cosmic.dtb \
vf610-twr.dtb \ vf610-twr.dtb \
vf610-zii-dev-rev-b.dtb vf610-zii-dev-rev-b.dtb \
vf610-zii-dev-rev-c.dtb
dtb-$(CONFIG_ARCH_MXS) += \ dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \ imx23-evk.dtb \
imx23-olinuxino.dtb \ imx23-olinuxino.dtb \
......
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
浏览文件 @ d4cd1581
...@@ -43,32 +43,12 @@ ...@@ -43,32 +43,12 @@
*/ */
/dts-v1/; /dts-v1/;
#include "vf610.dtsi" #include "vf610-zii-dev.dtsi"
/ { / {
model = "ZII VF610 Development Board, Rev B"; model = "ZII VF610 Development Board, Rev B";
compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x80000000 0x20000000>;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pinctrl_leds_debug>;
pinctrl-names = "default";
debug {
label = "zii:green:debug1";
gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
mdio-mux { mdio-mux {
compatible = "mdio-mux-gpio"; compatible = "mdio-mux-gpio";
pinctrl-0 = <&pinctrl_mdio_mux>; pinctrl-0 = <&pinctrl_mdio_mux>;
...@@ -86,7 +66,7 @@ ...@@ -86,7 +66,7 @@
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
switch0: switch0@0 { switch0: switch@0 {
compatible = "marvell,mv88e6085"; compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -102,6 +82,7 @@ ...@@ -102,6 +82,7 @@
ports { ports {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
port@0 { port@0 {
reg = <0>; reg = <0>;
label = "lan0"; label = "lan0";
...@@ -136,6 +117,7 @@ ...@@ -136,6 +117,7 @@
reg = <6>; reg = <6>;
label = "cpu"; label = "cpu";
ethernet = <&fec1>; ethernet = <&fec1>;
fixed-link { fixed-link {
speed = <100>; speed = <100>;
full-duplex; full-duplex;
...@@ -168,7 +150,7 @@ ...@@ -168,7 +150,7 @@
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
switch1: switch1@0 { switch1: switch@0 {
compatible = "marvell,mv88e6085"; compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_gpio_switch1>; pinctrl-0 = <&pinctrl_gpio_switch1>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -184,6 +166,7 @@ ...@@ -184,6 +166,7 @@
ports { ports {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
port@0 { port@0 {
reg = <0>; reg = <0>;
label = "lan3"; label = "lan3";
...@@ -207,6 +190,7 @@ ...@@ -207,6 +190,7 @@
label = "dsa"; label = "dsa";
link = <&switch2port9>; link = <&switch2port9>;
phy-mode = "rgmii-txid"; phy-mode = "rgmii-txid";
fixed-link { fixed-link {
speed = <1000>; speed = <1000>;
full-duplex; full-duplex;
...@@ -227,16 +211,19 @@ ...@@ -227,16 +211,19 @@
mdio { mdio {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
switch1phy0: switch1phy0@0 { switch1phy0: switch1phy0@0 {
reg = <0>; reg = <0>;
interrupt-parent = <&switch1>; interrupt-parent = <&switch1>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
}; };
switch1phy1: switch1phy0@1 { switch1phy1: switch1phy0@1 {
reg = <1>; reg = <1>;
interrupt-parent = <&switch1>; interrupt-parent = <&switch1>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
}; };
switch1phy2: switch1phy0@2 { switch1phy2: switch1phy0@2 {
reg = <2>; reg = <2>;
interrupt-parent = <&switch1>; interrupt-parent = <&switch1>;
...@@ -261,6 +248,7 @@ ...@@ -261,6 +248,7 @@
ports { ports {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
port@0 { port@0 {
reg = <0>; reg = <0>;
label = "lan6"; label = "lan6";
...@@ -279,6 +267,7 @@ ...@@ -279,6 +267,7 @@
port@3 { port@3 {
reg = <3>; reg = <3>;
label = "optical3"; label = "optical3";
fixed-link { fixed-link {
speed = <1000>; speed = <1000>;
full-duplex; full-duplex;
...@@ -290,6 +279,7 @@ ...@@ -290,6 +279,7 @@
port@4 { port@4 {
reg = <4>; reg = <4>;
label = "optical4"; label = "optical4";
fixed-link { fixed-link {
speed = <1000>; speed = <1000>;
full-duplex; full-duplex;
...@@ -304,6 +294,7 @@ ...@@ -304,6 +294,7 @@
phy-mode = "rgmii-txid"; phy-mode = "rgmii-txid";
link = <&switch1port5 link = <&switch1port5
&switch0port5>; &switch0port5>;
fixed-link { fixed-link {
speed = <1000>; speed = <1000>;
full-duplex; full-duplex;
...@@ -320,25 +311,6 @@ ...@@ -320,25 +311,6 @@
}; };
}; };
reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_mcu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
usb0_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
pinctrl-0 = <&pinctrl_usb_vbus>;
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 6 0>;
};
spi0 { spi0 {
compatible = "spi-gpio"; compatible = "spi-gpio";
pinctrl-0 = <&pinctrl_gpio_spi0>; pinctrl-0 = <&pinctrl_gpio_spi0>;
...@@ -375,49 +347,6 @@ ...@@ -375,49 +347,6 @@
}; };
}; };
&adc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_ad5>;
vref-supply = <&reg_vcc_3v3_mcu>;
status = "okay";
};
&edma0 {
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec0 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
fixed-link {
speed = <100>;
full-duplex;
};
mdio1: mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
};
&i2c0 { &i2c0 {
clock-frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -442,33 +371,6 @@ ...@@ -442,33 +371,6 @@
interrupt-parent = <&gpio2>; interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
}; };
lm75@48 {
compatible = "national,lm75";
reg = <0x48>;
};
at24c04@50 {
compatible = "atmel,24c04";
reg = <0x50>;
};
at24c04@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
ds1682@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
}; };
&i2c2 { &i2c2 {
...@@ -538,120 +440,8 @@ ...@@ -538,120 +440,8 @@
}; };
}; };
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbdev0 {
disable-over-current;
vbus-supply = <&usb0_vbus>;
dr_mode = "host";
status = "okay";
};
&usbh1 {
disable-over-current;
status = "okay";
};
&usbmisc0 {
status = "okay";
};
&usbmisc1 {
status = "okay";
};
&usbphy0 {
status = "okay";
};
&usbphy1 {
status = "okay";
};
&iomuxc { &iomuxc {
pinctrl_adc0_ad5: adc0ad5grp {
fsl,pins = <
VF610_PAD_PTC30__ADC0_SE5 0x00a1
>;
};
pinctrl_dspi0: dspi0grp {
fsl,pins = <
VF610_PAD_PTB18__DSPI0_CS1 0x1182
VF610_PAD_PTB19__DSPI0_CS0 0x1182
VF610_PAD_PTB20__DSPI0_SIN 0x1181
VF610_PAD_PTB21__DSPI0_SOUT 0x1182
VF610_PAD_PTB22__DSPI0_SCK 0x1182
>;
};
pinctrl_dspi2: dspi2grp {
fsl,pins = <
VF610_PAD_PTD31__DSPI2_CS1 0x1182
VF610_PAD_PTD30__DSPI2_CS0 0x1182
VF610_PAD_PTD29__DSPI2_SIN 0x1181
VF610_PAD_PTD28__DSPI2_SOUT 0x1182
VF610_PAD_PTD27__DSPI2_SCK 0x1182
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTA7__GPIO_134 0x219d
>;
};
pinctrl_fec0: fec0grp {
fsl,pins = <
VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
fsl,pins = < fsl,pins = <
VF610_PAD_PTE27__GPIO_132 0x33e2 VF610_PAD_PTE27__GPIO_132 0x33e2
...@@ -680,39 +470,6 @@ ...@@ -680,39 +470,6 @@
>; >;
}; };
pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
fsl,pins = <
VF610_PAD_PTE14__GPIO_119 0x31c2
>;
};
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
VF610_PAD_PTB15__I2C0_SDA 0x37ff
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
VF610_PAD_PTB16__I2C1_SCL 0x37ff
VF610_PAD_PTB17__I2C1_SDA 0x37ff
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
VF610_PAD_PTA22__I2C2_SCL 0x37ff
VF610_PAD_PTA23__I2C2_SDA 0x37ff
>;
};
pinctrl_leds_debug: pinctrl-leds-debug {
fsl,pins = <
VF610_PAD_PTD20__GPIO_74 0x31c2
>;
};
pinctrl_mdio_mux: pinctrl-mdio-mux { pinctrl_mdio_mux: pinctrl-mdio-mux {
fsl,pins = < fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x31c2 VF610_PAD_PTA18__GPIO_8 0x31c2
...@@ -727,48 +484,4 @@ ...@@ -727,48 +484,4 @@
VF610_PAD_PTB28__GPIO_98 0x219d VF610_PAD_PTB28__GPIO_98 0x219d
>; >;
}; };
pinctrl_qspi0: qspi0grp {
fsl,pins = <
VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
>;
};
pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
VF610_PAD_PTB23__UART1_TX 0x21a2
VF610_PAD_PTB24__UART1_RX 0x21a1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTD0__UART2_TX 0x21a2
VF610_PAD_PTD1__UART2_RX 0x21a1
>;
};
pinctrl_usb_vbus: pinctrl-usb-vbus {
fsl,pins = <
VF610_PAD_PTA16__GPIO_6 0x31c2
>;
};
pinctrl_usb0_host: usb0-host-grp {
fsl,pins = <
VF610_PAD_PTD6__GPIO_85 0x0062
>;
};
}; };
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts 0 → 100644
浏览文件 @ d4cd1581
/*
* Copyright (C) 2015, 2016 Zodiac Inflight Innovations
*
* Based on an original 'vf610-twr.dts' which is Copyright 2015,
* Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "vf610-zii-dev.dtsi"
/ {
model = "ZII VF610 Development Board, Rev C";
compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
mdio-mux {
compatible = "mdio-mux-gpio";
pinctrl-0 = <&pinctrl_mdio_mux>;
pinctrl-names = "default";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
&gpio0 9 GPIO_ACTIVE_HIGH
&gpio0 25 GPIO_ACTIVE_HIGH>;
mdio-parent-bus = <&mdio1>;
#address-cells = <1>;
#size-cells = <0>;
mdio_mux_1: mdio@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
switch0: switch@0 {
compatible = "marvell,mv88e6190";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&fec1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
switch0port10: port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
link = <&switch1port10>;
};
};
};
};
mdio_mux_2: mdio@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
switch1: switch@0 {
compatible = "marvell,mv88e6190";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "lan5";
};
port@2 {
reg = <2>;
label = "lan6";
};
port@3 {
reg = <3>;
label = "lan7";
};
port@4 {
reg = <4>;
label = "lan8";
};
switch1port10: port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
link = <&switch0port10>;
};
};
};
};
mdio_mux_4: mdio@4 {
reg = <4>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&dspi0 {
bus-num = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dspi0>;
status = "okay";
spi-num-chipselects = <2>;
m25p128@0 {
compatible = "m25p128", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <1000000>;
};
atzb-rf-233@1 {
compatible = "atmel,at86rf233";
pinctrl-names = "default";
pinctrl-0 = <&pinctr_atzb_rf_233>;
spi-max-frequency = <7500000>;
reg = <1>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpio3>;
xtal-trim = /bits/ 8 <0x06>;
sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
fsl,spi-cs-sck-delay = <180>;
fsl,spi-sck-cs-delay = <250>;
};
};
&i2c0 {
/*
* U712
*
* Exposed signals:
* P1 - WE2_CMD
* P2 - WE2_CLK
*/
gpio5: pca9557@18 {
compatible = "nxp,pca9557";
reg = <0x18>;
gpio-controller;
#gpio-cells = <2>;
};
/*
* U121
*
* Exposed signals:
* I/O0 - ENET_SWR_EN
* I/O1 - ESW1_RESETn
* I/O2 - ARINC_RESET
* I/O3 - DD1_IO_RESET
* I/O4 - ESW2_RESETn
* I/O5 - ESW3_RESETn
* I/O6 - ESW4_RESETn
* I/O8 - TP909
* I/O9 - FEM_SEL
* I/O10 - WIFI_RESETn
* I/O11 - PHY_RSTn
* I/O12 - OPT1_SD
* I/O13 - OPT2_SD
* I/O14 - OPT1_TX_DIS
* I/O15 - OPT2_TX_DIS
*/
gpio6: sx1503@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
interrupt-controller;
enet_swr_en {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "enet-swr-en";
};
};
/*
* U715
*
* Exposed signals:
* IO0 - WE1_CLK
* IO1 - WE1_CMD
*/
gpio7: pca9554@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
};
&i2c1 {
at24mac602@00 {
compatible = "atmel,24c02";
reg = <0x50>;
read-only;
};
};
&i2c2 {
tca9548@70 {
compatible = "nxp,pca9548";
pinctrl-0 = <&pinctrl_i2c_mux_reset>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
sfp2: at24c04@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
sfp3: at24c04@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&gpio0 {
eth0_intrp {
gpio-hog;
gpios = <23 GPIO_ACTIVE_HIGH>;
input;
line-name = "sx1503-irq";
};
};
&gpio3 {
eth0_intrp {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
input;
line-name = "eth0-intrp";
};
};
&fec0 {
mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec0_phy_int>;
interrupt-parent = <&gpio3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
reg = <0>;
};
};
};
&iomuxc {
pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
fsl,pins = <
VF610_PAD_PTB2__GPIO_24 0x31c2
VF610_PAD_PTE27__GPIO_132 0x33e2
>;
};
pinctrl_sx1503_20: pinctrl-sx1503-20 {
fsl,pins = <
VF610_PAD_PTB1__GPIO_23 0x219d
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
VF610_PAD_PTA20__UART3_TX 0x21a2
VF610_PAD_PTA21__UART3_RX 0x21a1
>;
};
pinctrl_mdio_mux: pinctrl-mdio-mux {
fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x31c2
VF610_PAD_PTA19__GPIO_9 0x31c2
VF610_PAD_PTB3__GPIO_25 0x31c2
>;
};
pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x219d
>;
};
};
arch/arm/boot/dts/vf610-zii-dev.dtsi 0 → 100644
浏览文件 @ d4cd1581
/*
* Copyright (C) 2015, 2016 Zodiac Inflight Innovations
*
* Based on an original 'vf610-twr.dts' which is Copyright 2015,
* Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "vf610.dtsi"
/ {
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x80000000 0x20000000>;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pinctrl_leds_debug>;
pinctrl-names = "default";
debug {
label = "zii:green:debug1";
gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_mcu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
usb0_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
pinctrl-0 = <&pinctrl_usb_vbus>;
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 6 0>;
};
};
&adc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_ad5>;
vref-supply = <&reg_vcc_3v3_mcu>;
status = "okay";
};
&edma0 {
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec0 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
fixed-link {
speed = <100>;
full-duplex;
};
mdio1: mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
};
&i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
lm75@48 {
compatible = "national,lm75";
reg = <0x48>;
};
at24c04@50 {
compatible = "atmel,24c04";
reg = <0x50>;
};
at24c04@52 {
compatible = "atmel,24c04";
reg = <0x52>;
};
ds1682@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbdev0 {
disable-over-current;
vbus-supply = <&usb0_vbus>;
dr_mode = "host";
status = "okay";
};
&usbh1 {
disable-over-current;
status = "okay";
};
&usbmisc0 {
status = "okay";
};
&usbmisc1 {
status = "okay";
};
&usbphy0 {
status = "okay";
};
&usbphy1 {
status = "okay";
};
&iomuxc {
pinctrl_adc0_ad5: adc0ad5grp {
fsl,pins = <
VF610_PAD_PTC30__ADC0_SE5 0x00a1
>;
};
pinctrl_dspi0: dspi0grp {
fsl,pins = <
VF610_PAD_PTB18__DSPI0_CS1 0x1182
VF610_PAD_PTB19__DSPI0_CS0 0x1182
VF610_PAD_PTB20__DSPI0_SIN 0x1181
VF610_PAD_PTB21__DSPI0_SOUT 0x1182
VF610_PAD_PTB22__DSPI0_SCK 0x1182
>;
};
pinctrl_dspi2: dspi2grp {
fsl,pins = <
VF610_PAD_PTD31__DSPI2_CS1 0x1182
VF610_PAD_PTD30__DSPI2_CS0 0x1182
VF610_PAD_PTD29__DSPI2_SIN 0x1181
VF610_PAD_PTD28__DSPI2_SOUT 0x1182
VF610_PAD_PTD27__DSPI2_SCK 0x1182
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTA7__GPIO_134 0x219d
>;
};
pinctrl_fec0: fec0grp {
fsl,pins = <
VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
fsl,pins = <
VF610_PAD_PTB22__GPIO_44 0x33e2
VF610_PAD_PTB21__GPIO_43 0x33e2
VF610_PAD_PTB20__GPIO_42 0x33e1
VF610_PAD_PTB19__GPIO_41 0x33e2
VF610_PAD_PTB18__GPIO_40 0x33e2
>;
};
pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
fsl,pins = <
VF610_PAD_PTE14__GPIO_119 0x31c2
>;
};
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
VF610_PAD_PTB15__I2C0_SDA 0x37ff
>;
};
pinctrl_i2c0_gpio: i2c0grp-gpio {
fsl,pins = <
VF610_PAD_PTB14__GPIO_36 0x31c2
VF610_PAD_PTB15__GPIO_37 0x31c2
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
VF610_PAD_PTB16__I2C1_SCL 0x37ff
VF610_PAD_PTB17__I2C1_SDA 0x37ff
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
VF610_PAD_PTA22__I2C2_SCL 0x37ff
VF610_PAD_PTA23__I2C2_SDA 0x37ff
>;
};
pinctrl_leds_debug: pinctrl-leds-debug {
fsl,pins = <
VF610_PAD_PTD20__GPIO_74 0x31c2
>;
};
pinctrl_qspi0: qspi0grp {
fsl,pins = <
VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
>;
};
pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
VF610_PAD_PTB23__UART1_TX 0x21a2
VF610_PAD_PTB24__UART1_RX 0x21a1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTD0__UART2_TX 0x21a2
VF610_PAD_PTD1__UART2_RX 0x21a1
>;
};
pinctrl_usb_vbus: pinctrl-usb-vbus {
fsl,pins = <
VF610_PAD_PTA16__GPIO_6 0x31c2
>;
};
pinctrl_usb0_host: usb0-host-grp {
fsl,pins = <
VF610_PAD_PTD6__GPIO_85 0x0062
>;
};
};
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或