提交 d45daa6d 编写于 作者: K Karthikeyan Kathirvel 提交者: Kalle Valo

wifi: ath11k: Fix scan request param frame size warning

Following warning was observed

drivers/net/wireless/ath/ath11k/mac.c:2351:1: warning: the frame
size of 1184 bytes is larger than 1024 bytes [-Wframe-larger-than=]

A local variable is declared with a size larger than 1024 bytes
this causing a compilation warning. Change the local variable to
heap memory to fix the warning.

Tested-on: IPQ8074 AHB WLAN.HK.2.7.0.1-01701-QCAHKSWPL_SILICONZ-1 v2
Signed-off-by: NKarthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221205192125.13533-1-quic_kathirve@quicinc.com
上级 f099c5c9
......@@ -3612,7 +3612,7 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
struct ath11k *ar = hw->priv;
struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
struct cfg80211_scan_request *req = &hw_req->req;
struct scan_req_params arg;
struct scan_req_params *arg = NULL;
int ret = 0;
int i;
u32 scan_timeout;
......@@ -3640,72 +3640,78 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
if (ret)
goto exit;
memset(&arg, 0, sizeof(arg));
ath11k_wmi_start_scan_init(ar, &arg);
arg.vdev_id = arvif->vdev_id;
arg.scan_id = ATH11K_SCAN_ID;
arg = kzalloc(sizeof(*arg), GFP_KERNEL);
if (!arg) {
ret = -ENOMEM;
goto exit;
}
ath11k_wmi_start_scan_init(ar, arg);
arg->vdev_id = arvif->vdev_id;
arg->scan_id = ATH11K_SCAN_ID;
if (req->ie_len) {
arg.extraie.ptr = kmemdup(req->ie, req->ie_len, GFP_KERNEL);
if (!arg.extraie.ptr) {
arg->extraie.ptr = kmemdup(req->ie, req->ie_len, GFP_KERNEL);
if (!arg->extraie.ptr) {
ret = -ENOMEM;
goto exit;
}
arg.extraie.len = req->ie_len;
arg->extraie.len = req->ie_len;
}
if (req->n_ssids) {
arg.num_ssids = req->n_ssids;
for (i = 0; i < arg.num_ssids; i++) {
arg.ssid[i].length = req->ssids[i].ssid_len;
memcpy(&arg.ssid[i].ssid, req->ssids[i].ssid,
arg->num_ssids = req->n_ssids;
for (i = 0; i < arg->num_ssids; i++) {
arg->ssid[i].length = req->ssids[i].ssid_len;
memcpy(&arg->ssid[i].ssid, req->ssids[i].ssid,
req->ssids[i].ssid_len);
}
} else {
arg.scan_flags |= WMI_SCAN_FLAG_PASSIVE;
arg->scan_flags |= WMI_SCAN_FLAG_PASSIVE;
}
if (req->n_channels) {
arg.num_chan = req->n_channels;
arg.chan_list = kcalloc(arg.num_chan, sizeof(*arg.chan_list),
GFP_KERNEL);
arg->num_chan = req->n_channels;
arg->chan_list = kcalloc(arg->num_chan, sizeof(*arg->chan_list),
GFP_KERNEL);
if (!arg.chan_list) {
if (!arg->chan_list) {
ret = -ENOMEM;
goto exit;
}
for (i = 0; i < arg.num_chan; i++)
arg.chan_list[i] = req->channels[i]->center_freq;
for (i = 0; i < arg->num_chan; i++)
arg->chan_list[i] = req->channels[i]->center_freq;
}
if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
arg.scan_f_add_spoofed_mac_in_probe = 1;
ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
arg->scan_f_add_spoofed_mac_in_probe = 1;
ether_addr_copy(arg->mac_addr.addr, req->mac_addr);
ether_addr_copy(arg->mac_mask.addr, req->mac_addr_mask);
}
/* if duration is set, default dwell times will be overwritten */
if (req->duration) {
arg.dwell_time_active = req->duration;
arg.dwell_time_active_2g = req->duration;
arg.dwell_time_active_6g = req->duration;
arg.dwell_time_passive = req->duration;
arg.dwell_time_passive_6g = req->duration;
arg.burst_duration = req->duration;
scan_timeout = min_t(u32, arg.max_rest_time *
(arg.num_chan - 1) + (req->duration +
arg->dwell_time_active = req->duration;
arg->dwell_time_active_2g = req->duration;
arg->dwell_time_active_6g = req->duration;
arg->dwell_time_passive = req->duration;
arg->dwell_time_passive_6g = req->duration;
arg->burst_duration = req->duration;
scan_timeout = min_t(u32, arg->max_rest_time *
(arg->num_chan - 1) + (req->duration +
ATH11K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
arg.num_chan, arg.max_scan_time);
arg->num_chan, arg->max_scan_time);
} else {
scan_timeout = arg.max_scan_time;
scan_timeout = arg->max_scan_time;
}
/* Add a margin to account for event/command processing */
scan_timeout += ATH11K_MAC_SCAN_CMD_EVT_OVERHEAD;
ret = ath11k_start_scan(ar, &arg);
ret = ath11k_start_scan(ar, arg);
if (ret) {
ath11k_warn(ar->ab, "failed to start hw scan: %d\n", ret);
spin_lock_bh(&ar->data_lock);
......@@ -3717,10 +3723,11 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
msecs_to_jiffies(scan_timeout));
exit:
kfree(arg.chan_list);
if (req->ie_len)
kfree(arg.extraie.ptr);
if (arg) {
kfree(arg->chan_list);
kfree(arg->extraie.ptr);
kfree(arg);
}
mutex_unlock(&ar->conf_mutex);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册