brcmfmac: Limit control message length from host to device.

An control request or set message length is restricted to
ETH frame length for the buffer from host to device. This
is limitation is imposed by the firmware.
Reviewed-by: NArend Van Spriel <arend@broadcom.com>
Signed-off-by: NHante Meuleman <meuleman@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/bcdc.c

@@ -41,9 +41,6 @@ struct brcmf_proto_bcdc_dcmd {
 	__le32 status;	/* status code returned from the device */
 };
 
-/* Max valid buffer size that can be sent to the dongle */
-#define BCDC_MAX_MSG_SIZE	(ETH_FRAME_LEN+ETH_FCS_LEN)
-
 /* BCDC flag definitions */
 #define BCDC_DCMD_ERROR		0x01		/* 1=cmd failed */
 #define BCDC_DCMD_SET		0x02		/* 0=get, 1=set cmd */
@@ -133,9 +130,12 @@ brcmf_proto_bcdc_msg(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf,
 	if (buf)
 		memcpy(bcdc->buf, buf, len);
 
+	len += sizeof(*msg);
+	if (len > BRCMF_TX_IOCTL_MAX_MSG_SIZE)
+		len = BRCMF_TX_IOCTL_MAX_MSG_SIZE;
+
 	/* Send request */
-	return brcmf_bus_txctl(drvr->bus_if, (unsigned char *)&bcdc->msg,
-			       len + sizeof(struct brcmf_proto_bcdc_dcmd));
+	return brcmf_bus_txctl(drvr->bus_if, (unsigned char *)&bcdc->msg, len);
 }
 
 static int brcmf_proto_bcdc_cmplt(struct brcmf_pub *drvr, u32 id, u32 len)

drivers/net/wireless/brcm80211/brcmfmac/dhd.h

@@ -37,6 +37,11 @@
 #define BRCMF_DCMD_MEDLEN	1536
 #define BRCMF_DCMD_MAXLEN	8192
 
+/* IOCTL from host to device are limited in lenght. A device can only handle
+ * ethernet frame size. This limitation is to be applied by protocol layer.
+ */
+#define BRCMF_TX_IOCTL_MAX_MSG_SIZE	(ETH_FRAME_LEN+ETH_FCS_LEN)
+
 #define BRCMF_AMPDU_RX_REORDER_MAXFLOWS		256
 
 /* Length of firmware version string stored for