Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 d41d3aeb 编写于 作者: B Bryan O'Sullivan 提交者： Roland Dreier
浏览文件
操作

IB/ipath: core driver header files 

ipath_common.h and ips_common.h contain definitions shared between
userspace and the kernel.

ipath_kernel.h is the core driver header file.

ipath_debug.h contains mask values used for controlling driver debugging.

ipath_registers.h contains bitmask definitions used in chip registers.
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
上级 7bb206e3
展开全部 隐藏空白更改
内联 并排
Showing with 2305 addition and 0 deletion
drivers/infiniband/hw/ipath/ipath_common.h 0 → 100644
浏览文件 @ d41d3aeb
/*
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _IPATH_COMMON_H
#define _IPATH_COMMON_H
/*
* This file contains defines, structures, etc. that are used
* to communicate between kernel and user code.
*/
/* This is the IEEE-assigned OUI for PathScale, Inc. */
#define IPATH_SRC_OUI_1 0x00
#define IPATH_SRC_OUI_2 0x11
#define IPATH_SRC_OUI_3 0x75
/* version of protocol header (known to chip also). In the long run,
* we should be able to generate and accept a range of version numbers;
* for now we only accept one, and it's compiled in.
*/
#define IPS_PROTO_VERSION 2
/*
* These are compile time constants that you may want to enable or disable
* if you are trying to debug problems with code or performance.
* IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
* fastpath code
* IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
* traced in faspath code
* _IPATH_TRACING define as 0 if you want to remove all tracing in a
* compilation unit
* _IPATH_DEBUGGING define as 0 if you want to remove debug prints
*/
/*
* The value in the BTH QP field that InfiniPath uses to differentiate
* an infinipath protocol IB packet vs standard IB transport
*/
#define IPATH_KD_QP 0x656b79
/*
* valid states passed to ipath_set_linkstate() user call
*/
#define IPATH_IB_LINKDOWN 0
#define IPATH_IB_LINKARM 1
#define IPATH_IB_LINKACTIVE 2
#define IPATH_IB_LINKINIT 3
#define IPATH_IB_LINKDOWN_SLEEP 4
#define IPATH_IB_LINKDOWN_DISABLE 5
/*
* stats maintained by the driver. For now, at least, this is global
* to all minor devices.
*/
struct infinipath_stats {
/* number of interrupts taken */
__u64 sps_ints;
/* number of interrupts for errors */
__u64 sps_errints;
/* number of errors from chip (not incl. packet errors or CRC) */
__u64 sps_errs;
/* number of packet errors from chip other than CRC */
__u64 sps_pkterrs;
/* number of packets with CRC errors (ICRC and VCRC) */
__u64 sps_crcerrs;
/* number of hardware errors reported (parity, etc.) */
__u64 sps_hwerrs;
/* number of times IB link changed state unexpectedly */
__u64 sps_iblink;
/* no longer used; left for compatibility */
__u64 sps_unused3;
/* number of kernel (port0) packets received */
__u64 sps_port0pkts;
/* number of "ethernet" packets sent by driver */
__u64 sps_ether_spkts;
/* number of "ethernet" packets received by driver */
__u64 sps_ether_rpkts;
/* number of SMA packets sent by driver */
__u64 sps_sma_spkts;
/* number of SMA packets received by driver */
__u64 sps_sma_rpkts;
/* number of times all ports rcvhdrq was full and packet dropped */
__u64 sps_hdrqfull;
/* number of times all ports egrtid was full and packet dropped */
__u64 sps_etidfull;
/*
* number of times we tried to send from driver, but no pio buffers
* avail
*/
__u64 sps_nopiobufs;
/* number of ports currently open */
__u64 sps_ports;
/* list of pkeys (other than default) accepted (0 means not set) */
__u16 sps_pkeys[4];
/* lids for up to 4 infinipaths, indexed by infinipath # */
__u16 sps_lid[4];
/* number of user ports per chip (not IB ports) */
__u32 sps_nports;
/* not our interrupt, or already handled */
__u32 sps_nullintr;
/* max number of packets handled per receive call */
__u32 sps_maxpkts_call;
/* avg number of packets handled per receive call */
__u32 sps_avgpkts_call;
/* total number of pages locked */
__u64 sps_pagelocks;
/* total number of pages unlocked */
__u64 sps_pageunlocks;
/*
* Number of packets dropped in kernel other than errors (ether
* packets if ipath not configured, sma/mad, etc.)
*/
__u64 sps_krdrops;
/* mlids for up to 4 infinipaths, indexed by infinipath # */
__u16 sps_mlid[4];
/* pad for future growth */
__u64 __sps_pad[45];
};
/*
* These are the status bits readable (in ascii form, 64bit value)
* from the "status" sysfs file.
*/
#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */
#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
/* Device has been disabled via admin request */
#define IPATH_STATUS_ADMIN_DISABLED 0x4
#define IPATH_STATUS_OIB_SMA 0x8 /* ipath_mad kernel SMA running */
#define IPATH_STATUS_SMA 0x10 /* user SMA running */
/* Chip has been found and initted */
#define IPATH_STATUS_CHIP_PRESENT 0x20
/* IB link is at ACTIVE, usable for data traffic */
#define IPATH_STATUS_IB_READY 0x40
/* link is configured, LID, MTU, etc. have been set */
#define IPATH_STATUS_IB_CONF 0x80
/* no link established, probably no cable */
#define IPATH_STATUS_IB_NOCABLE 0x100
/* A Fatal hardware error has occurred. */
#define IPATH_STATUS_HWERROR 0x200
/*
* The list of usermode accessible registers. Also see Reg_* later in file.
*/
typedef enum _ipath_ureg {
/* (RO) DMA RcvHdr to be used next. */
ur_rcvhdrtail = 0,
/* (RW) RcvHdr entry to be processed next by host. */
ur_rcvhdrhead = 1,
/* (RO) Index of next Eager index to use. */
ur_rcvegrindextail = 2,
/* (RW) Eager TID to be processed next */
ur_rcvegrindexhead = 3,
/* For internal use only; max register number. */
_IPATH_UregMax
} ipath_ureg;
/* bit values for spi_runtime_flags */
#define IPATH_RUNTIME_HT 0x1
#define IPATH_RUNTIME_PCIE 0x2
#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
#define IPATH_RUNTIME_RCVHDR_COPY 0x8
/*
* This structure is returned by ipath_userinit() immediately after
* open to get implementation-specific info, and info specific to this
* instance.
*
* This struct must have explict pad fields where type sizes
* may result in different alignments between 32 and 64 bit
* programs, since the 64 bit * bit kernel requires the user code
* to have matching offsets
*/
struct ipath_base_info {
/* version of hardware, for feature checking. */
__u32 spi_hw_version;
/* version of software, for feature checking. */
__u32 spi_sw_version;
/* InfiniPath port assigned, goes into sent packets */
__u32 spi_port;
/*
* IB MTU, packets IB data must be less than this.
* The MTU is in bytes, and will be a multiple of 4 bytes.
*/
__u32 spi_mtu;
/*
* Size of a PIO buffer. Any given packet's total size must be less
* than this (in words). Included is the starting control word, so
* if 513 is returned, then total pkt size is 512 words or less.
*/
__u32 spi_piosize;
/* size of the TID cache in infinipath, in entries */
__u32 spi_tidcnt;
/* size of the TID Eager list in infinipath, in entries */
__u32 spi_tidegrcnt;
/* size of a single receive header queue entry. */
__u32 spi_rcvhdrent_size;
/*
* Count of receive header queue entries allocated.
* This may be less than the spu_rcvhdrcnt passed in!.
*/
__u32 spi_rcvhdr_cnt;
/* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
__u32 spi_runtime_flags;
/* address where receive buffer queue is mapped into */
__u64 spi_rcvhdr_base;
/* user program. */
/* base address of eager TID receive buffers. */
__u64 spi_rcv_egrbufs;
/* Allocated by initialization code, not by protocol. */
/*
* Size of each TID buffer in host memory, starting at
* spi_rcv_egrbufs. The buffers are virtually contiguous.
*/
__u32 spi_rcv_egrbufsize;
/*
* The special QP (queue pair) value that identifies an infinipath
* protocol packet from standard IB packets. More, probably much
* more, to be added.
*/
__u32 spi_qpair;
/*
* User register base for init code, not to be used directly by
* protocol or applications.
*/
__u64 __spi_uregbase;
/*
* Maximum buffer size in bytes that can be used in a single TID
* entry (assuming the buffer is aligned to this boundary). This is
* the minimum of what the hardware and software support Guaranteed
* to be a power of 2.
*/
__u32 spi_tid_maxsize;
/*
* alignment of each pio send buffer (byte count
* to add to spi_piobufbase to get to second buffer)
*/
__u32 spi_pioalign;
/*
* The index of the first pio buffer available to this process;
* needed to do lookup in spi_pioavailaddr; not added to
* spi_piobufbase.
*/
__u32 spi_pioindex;
/* number of buffers mapped for this process */
__u32 spi_piocnt;
/*
* Base address of writeonly pio buffers for this process.
* Each buffer has spi_piosize words, and is aligned on spi_pioalign
* boundaries. spi_piocnt buffers are mapped from this address
*/
__u64 spi_piobufbase;
/*
* Base address of readonly memory copy of the pioavail registers.
* There are 2 bits for each buffer.
*/
__u64 spi_pioavailaddr;
/*
* Address where driver updates a copy of the interface and driver
* status (IPATH_STATUS_*) as a 64 bit value. It's followed by a
* string indicating hardware error, if there was one.
*/
__u64 spi_status;
/* number of chip ports available to user processes */
__u32 spi_nports;
/* unit number of chip we are using */
__u32 spi_unit;
/* num bufs in each contiguous set */
__u32 spi_rcv_egrperchunk;
/* size in bytes of each contiguous set */
__u32 spi_rcv_egrchunksize;
/* total size of mmap to cover full rcvegrbuffers */
__u32 spi_rcv_egrbuftotlen;
} __attribute__ ((aligned(8)));
/*
* This version number is given to the driver by the user code during
* initialization in the spu_userversion field of ipath_user_info, so
* the driver can check for compatibility with user code.
*
* The major version changes when data structures
* change in an incompatible way. The driver must be the same or higher
* for initialization to succeed. In some cases, a higher version
* driver will not interoperate with older software, and initialization
* will return an error.
*/
#define IPATH_USER_SWMAJOR 1
/*
* Minor version differences are always compatible
* a within a major version, however if if user software is larger
* than driver software, some new features and/or structure fields
* may not be implemented; the user code must deal with this if it
* cares, or it must abort after initialization reports the difference
*/
#define IPATH_USER_SWMINOR 2
#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
#define IPATH_KERN_TYPE 0
/*
* Similarly, this is the kernel version going back to the user. It's
* slightly different, in that we want to tell if the driver was built as
* part of a PathScale release, or from the driver from OpenIB, kernel.org,
* or a standard distribution, for support reasons. The high bit is 0 for
* non-PathScale, and 1 for PathScale-built/supplied.
*
* It's returned by the driver to the user code during initialization in the
* spi_sw_version field of ipath_base_info, so the user code can in turn
* check for compatibility with the kernel.
*/
#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
/*
* This structure is passed to ipath_userinit() to tell the driver where
* user code buffers are, sizes, etc. The offsets and sizes of the
* fields must remain unchanged, for binary compatibility. It can
* be extended, if userversion is changed so user code can tell, if needed
*/
struct ipath_user_info {
/*
* version of user software, to detect compatibility issues.
* Should be set to IPATH_USER_SWVERSION.
*/
__u32 spu_userversion;
/* desired number of receive header queue entries */
__u32 spu_rcvhdrcnt;
/* size of struct base_info to write to */
__u32 spu_base_info_size;
/*
* number of words in KD protocol header
* This tells InfiniPath how many words to copy to rcvhdrq. If 0,
* kernel uses a default. Once set, attempts to set any other value
* are an error (EAGAIN) until driver is reloaded.
*/
__u32 spu_rcvhdrsize;
/*
* cache line aligned (64 byte) user address to
* which the rcvhdrtail register will be written by infinipath
* whenever it changes, so that no chip registers are read in
* the performance path.
*/
__u64 spu_rcvhdraddr;
/*
* address of struct base_info to write to
*/
__u64 spu_base_info;
} __attribute__ ((aligned(8)));
/* User commands. */
#define IPATH_CMD_MIN 16
#define IPATH_CMD_USER_INIT 16 /* set up userspace */
#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */
#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */
#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
#define IPATH_CMD_MAX 21
struct ipath_port_info {
__u32 num_active; /* number of active units */
__u32 unit; /* unit (chip) assigned to caller */
__u32 port; /* port on unit assigned to caller */
};
struct ipath_tid_info {
__u32 tidcnt;
/* make structure same size in 32 and 64 bit */
__u32 tid__unused;
/* virtual address of first page in transfer */
__u64 tidvaddr;
/* pointer (same size 32/64 bit) to __u16 tid array */
__u64 tidlist;
/*
* pointer (same size 32/64 bit) to bitmap of TIDs used
* for this call; checked for being large enough at open
*/
__u64 tidmap;
};
struct ipath_cmd {
__u32 type; /* command type */
union {
struct ipath_tid_info tid_info;
struct ipath_user_info user_info;
/* address in userspace of struct ipath_port_info to
write result to */
__u64 port_info;
/* enable/disable receipt of packets */
__u32 recv_ctrl;
/* partition key to set */
__u16 part_key;
} cmd;
};
struct ipath_iovec {
/* Pointer to data, but same size 32 and 64 bit */
__u64 iov_base;
/*
* Length of data; don't need 64 bits, but want
* ipath_sendpkt to remain same size as before 32 bit changes, so...
*/
__u64 iov_len;
};
/*
* Describes a single packet for send. Each packet can have one or more
* buffers, but the total length (exclusive of IB headers) must be less
* than the MTU, and if using the PIO method, entire packet length,
* including IB headers, must be less than the ipath_piosize value (words).
* Use of this necessitates including sys/uio.h
*/
struct __ipath_sendpkt {
__u32 sps_flags; /* flags for packet (TBD) */
__u32 sps_cnt; /* number of entries to use in sps_iov */
/* array of iov's describing packet. TEMPORARY */
struct ipath_iovec sps_iov[4];
};
/* Passed into SMA special file's ->read and ->write methods. */
struct ipath_sma_pkt
{
__u32 unit; /* unit on which to send packet */
__u64 data; /* address of payload in userspace */
__u32 len; /* length of payload */
};
/*
* Data layout in I2C flash (for GUID, etc.)
* All fields are little-endian binary unless otherwise stated
*/
#define IPATH_FLASH_VERSION 1
struct ipath_flash {
/* flash layout version (IPATH_FLASH_VERSION) */
__u8 if_fversion;
/* checksum protecting if_length bytes */
__u8 if_csum;
/*
* valid length (in use, protected by if_csum), including
* if_fversion and if_sum themselves)
*/
__u8 if_length;
/* the GUID, in network order */
__u8 if_guid[8];
/* number of GUIDs to use, starting from if_guid */
__u8 if_numguid;
/* the board serial number, in ASCII */
char if_serial[12];
/* board mfg date (YYYYMMDD ASCII) */
char if_mfgdate[8];
/* last board rework/test date (YYYYMMDD ASCII) */
char if_testdate[8];
/* logging of error counts, TBD */
__u8 if_errcntp[4];
/* powered on hours, updated at driver unload */
__u8 if_powerhour[2];
/* ASCII free-form comment field */
char if_comment[32];
/* 78 bytes used, min flash size is 128 bytes */
__u8 if_future[50];
};
/*
* These are the counters implemented in the chip, and are listed in order.
* The InterCaps naming is taken straight from the chip spec.
*/
struct infinipath_counters {
__u64 LBIntCnt;
__u64 LBFlowStallCnt;
__u64 Reserved1;
__u64 TxUnsupVLErrCnt;
__u64 TxDataPktCnt;
__u64 TxFlowPktCnt;
__u64 TxDwordCnt;
__u64 TxLenErrCnt;
__u64 TxMaxMinLenErrCnt;
__u64 TxUnderrunCnt;
__u64 TxFlowStallCnt;
__u64 TxDroppedPktCnt;
__u64 RxDroppedPktCnt;
__u64 RxDataPktCnt;
__u64 RxFlowPktCnt;
__u64 RxDwordCnt;
__u64 RxLenErrCnt;
__u64 RxMaxMinLenErrCnt;
__u64 RxICRCErrCnt;
__u64 RxVCRCErrCnt;
__u64 RxFlowCtrlErrCnt;
__u64 RxBadFormatCnt;
__u64 RxLinkProblemCnt;
__u64 RxEBPCnt;
__u64 RxLPCRCErrCnt;
__u64 RxBufOvflCnt;
__u64 RxTIDFullErrCnt;
__u64 RxTIDValidErrCnt;
__u64 RxPKeyMismatchCnt;
__u64 RxP0HdrEgrOvflCnt;
__u64 RxP1HdrEgrOvflCnt;
__u64 RxP2HdrEgrOvflCnt;
__u64 RxP3HdrEgrOvflCnt;
__u64 RxP4HdrEgrOvflCnt;
__u64 RxP5HdrEgrOvflCnt;
__u64 RxP6HdrEgrOvflCnt;
__u64 RxP7HdrEgrOvflCnt;
__u64 RxP8HdrEgrOvflCnt;
__u64 Reserved6;
__u64 Reserved7;
__u64 IBStatusChangeCnt;
__u64 IBLinkErrRecoveryCnt;
__u64 IBLinkDownedCnt;
__u64 IBSymbolErrCnt;
};
/*
* The next set of defines are for packet headers, and chip register
* and memory bits that are visible to and/or used by user-mode software
* The other bits that are used only by the driver or diags are in
* ipath_registers.h
*/
/* RcvHdrFlags bits */
#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
#define INFINIPATH_RHF_LENGTH_SHIFT 0
#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
#define INFINIPATH_RHF_EGRINDEX_MASK 0x7FF
#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
#define INFINIPATH_RHF_H_ICRCERR 0x80000000
#define INFINIPATH_RHF_H_VCRCERR 0x40000000
#define INFINIPATH_RHF_H_PARITYERR 0x20000000
#define INFINIPATH_RHF_H_LENERR 0x10000000
#define INFINIPATH_RHF_H_MTUERR 0x08000000
#define INFINIPATH_RHF_H_IHDRERR 0x04000000
#define INFINIPATH_RHF_H_TIDERR 0x02000000
#define INFINIPATH_RHF_H_MKERR 0x01000000
#define INFINIPATH_RHF_H_IBERR 0x00800000
#define INFINIPATH_RHF_L_SWA 0x00008000
#define INFINIPATH_RHF_L_SWB 0x00004000
/* infinipath header fields */
#define INFINIPATH_I_VERS_MASK 0xF
#define INFINIPATH_I_VERS_SHIFT 28
#define INFINIPATH_I_PORT_MASK 0xF
#define INFINIPATH_I_PORT_SHIFT 24
#define INFINIPATH_I_TID_MASK 0x7FF
#define INFINIPATH_I_TID_SHIFT 13
#define INFINIPATH_I_OFFSET_MASK 0x1FFF
#define INFINIPATH_I_OFFSET_SHIFT 0
/* K_PktFlags bits */
#define INFINIPATH_KPF_INTR 0x1
/* SendPIO per-buffer control */
#define INFINIPATH_SP_LENGTHP1_MASK 0x3FF
#define INFINIPATH_SP_LENGTHP1_SHIFT 0
#define INFINIPATH_SP_INTR 0x80000000
#define INFINIPATH_SP_TEST 0x40000000
#define INFINIPATH_SP_TESTEBP 0x20000000
/* SendPIOAvail bits */
#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
#endif /* _IPATH_COMMON_H */
drivers/infiniband/hw/ipath/ipath_debug.h 0 → 100644
浏览文件 @ d41d3aeb
/*
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _IPATH_DEBUG_H
#define _IPATH_DEBUG_H
#ifndef _IPATH_DEBUGGING /* debugging enabled or not */
#define _IPATH_DEBUGGING 1
#endif
#if _IPATH_DEBUGGING
/*
* Mask values for debugging. The scheme allows us to compile out any
* of the debug tracing stuff, and if compiled in, to enable or disable
* dynamically. This can be set at modprobe time also:
* modprobe infinipath.ko infinipath_debug=7
*/
#define __IPATH_INFO 0x1 /* generic low verbosity stuff */
#define __IPATH_DBG 0x2 /* generic debug */
#define __IPATH_TRSAMPLE 0x8 /* generate trace buffer sample entries */
/* leave some low verbosity spots open */
#define __IPATH_VERBDBG 0x40 /* very verbose debug */
#define __IPATH_PKTDBG 0x80 /* print packet data */
/* print process startup (init)/exit messages */
#define __IPATH_PROCDBG 0x100
/* print mmap/nopage stuff, not using VDBG any more */
#define __IPATH_MMDBG 0x200
#define __IPATH_USER_SEND 0x1000 /* use user mode send */
#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */
#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */
#define __IPATH_SMADBG 0x8000 /* sma packet debug */
#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) general debug on */
#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings on */
#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors on */
#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump on */
#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump on */
#else /* _IPATH_DEBUGGING */
/*
* define all of these even with debugging off, for the few places that do
* if(infinipath_debug & _IPATH_xyzzy), but in a way that will make the
* compiler eliminate the code
*/
#define __IPATH_INFO 0x0 /* generic low verbosity stuff */
#define __IPATH_DBG 0x0 /* generic debug */
#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */
#define __IPATH_VERBDBG 0x0 /* very verbose debug */
#define __IPATH_PKTDBG 0x0 /* print packet data */
#define __IPATH_PROCDBG 0x0 /* print process startup (init)/exit messages */
/* print mmap/nopage stuff, not using VDBG any more */
#define __IPATH_MMDBG 0x0
#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */
#define __IPATH_SMADBG 0x0 /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */
#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */
#define __IPATH_IPATHTABLE 0x0 /* Ethernet (IPATH) packet dump on */
#endif /* _IPATH_DEBUGGING */
#define __IPATH_VERBOSEDBG __IPATH_VERBDBG
#endif /* _IPATH_DEBUG_H */
drivers/infiniband/hw/ipath/ipath_kernel.h 0 → 100644
浏览文件 @ d41d3aeb
此差异已折叠。
drivers/infiniband/hw/ipath/ipath_registers.h 0 → 100644
浏览文件 @ d41d3aeb
/*
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _IPATH_REGISTERS_H
#define _IPATH_REGISTERS_H
/*
* This file should only be included by kernel source, and by the diags.
* It defines the registers, and their contents, for the InfiniPath HT-400 chip
*/
/*
* These are the InfiniPath register and buffer bit definitions,
* that are visible to software, and needed only by the kernel
* and diag code. A few, that are visible to protocol and user
* code are in ipath_common.h. Some bits are specific
* to a given chip implementation, and have been moved to the
* chip-specific source file
*/
/* kr_revision bits */
#define INFINIPATH_R_CHIPREVMINOR_MASK 0xFF
#define INFINIPATH_R_CHIPREVMINOR_SHIFT 0
#define INFINIPATH_R_CHIPREVMAJOR_MASK 0xFF
#define INFINIPATH_R_CHIPREVMAJOR_SHIFT 8
#define INFINIPATH_R_ARCH_MASK 0xFF
#define INFINIPATH_R_ARCH_SHIFT 16
#define INFINIPATH_R_SOFTWARE_MASK 0xFF
#define INFINIPATH_R_SOFTWARE_SHIFT 24
#define INFINIPATH_R_BOARDID_MASK 0xFF
#define INFINIPATH_R_BOARDID_SHIFT 32
/* kr_control bits */
#define INFINIPATH_C_FREEZEMODE 0x00000002
#define INFINIPATH_C_LINKENABLE 0x00000004
#define INFINIPATH_C_RESET 0x00000001
/* kr_sendctrl bits */
#define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
#define IPATH_S_ABORT 0
#define IPATH_S_PIOINTBUFAVAIL 1
#define IPATH_S_PIOBUFAVAILUPD 2
#define IPATH_S_PIOENABLE 3
#define IPATH_S_DISARM 31
#define INFINIPATH_S_ABORT (1U << IPATH_S_ABORT)
#define INFINIPATH_S_PIOINTBUFAVAIL (1U << IPATH_S_PIOINTBUFAVAIL)
#define INFINIPATH_S_PIOBUFAVAILUPD (1U << IPATH_S_PIOBUFAVAILUPD)
#define INFINIPATH_S_PIOENABLE (1U << IPATH_S_PIOENABLE)
#define INFINIPATH_S_DISARM (1U << IPATH_S_DISARM)
/* kr_rcvctrl bits */
#define INFINIPATH_R_PORTENABLE_SHIFT 0
#define INFINIPATH_R_INTRAVAIL_SHIFT 16
#define INFINIPATH_R_TAILUPD 0x80000000
/* kr_intstatus, kr_intclear, kr_intmask bits */
#define INFINIPATH_I_RCVURG_SHIFT 0
#define INFINIPATH_I_RCVAVAIL_SHIFT 12
#define INFINIPATH_I_ERROR 0x80000000
#define INFINIPATH_I_SPIOSENT 0x40000000
#define INFINIPATH_I_SPIOBUFAVAIL 0x20000000
#define INFINIPATH_I_GPIO 0x10000000
/* kr_errorstatus, kr_errorclear, kr_errormask bits */
#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL
#define INFINIPATH_E_RVCRC 0x0000000000000002ULL
#define INFINIPATH_E_RICRC 0x0000000000000004ULL
#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL
#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL
#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL
#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL
#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL
#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL
#define INFINIPATH_E_REBP 0x0000000000000200ULL
#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL
#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL
#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL
#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL
#define INFINIPATH_E_RBADTID 0x0000000000004000ULL
#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL
#define INFINIPATH_E_RHDR 0x0000000000010000ULL
#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL
#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL
#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL
#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL
#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL
#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL
#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL
#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL
#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL
#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL
#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL
#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL
#define INFINIPATH_E_RESET 0x0004000000000000ULL
#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL
/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
/* TXEMEMPARITYERR bit 0: PIObuf, 1: PIOpbc, 2: launchfifo
* RXEMEMPARITYERR bit 0: rcvbuf, 1: lookupq, 2: eagerTID, 3: expTID
* bit 4: flag buffer, 5: datainfo, 6: header info */
#define INFINIPATH_HWE_TXEMEMPARITYERR_MASK 0xFULL
#define INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT 40
#define INFINIPATH_HWE_RXEMEMPARITYERR_MASK 0x7FULL
#define INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT 44
#define INFINIPATH_HWE_RXDSYNCMEMPARITYERR 0x0000000400000000ULL
#define INFINIPATH_HWE_MEMBISTFAILED 0x0040000000000000ULL
#define INFINIPATH_HWE_IBCBUSTOSPCPARITYERR 0x4000000000000000ULL
#define INFINIPATH_HWE_IBCBUSFRSPCPARITYERR 0x8000000000000000ULL
/* kr_hwdiagctrl bits */
#define INFINIPATH_DC_FORCETXEMEMPARITYERR_MASK 0xFULL
#define INFINIPATH_DC_FORCETXEMEMPARITYERR_SHIFT 40
#define INFINIPATH_DC_FORCERXEMEMPARITYERR_MASK 0x7FULL
#define INFINIPATH_DC_FORCERXEMEMPARITYERR_SHIFT 44
#define INFINIPATH_DC_FORCERXDSYNCMEMPARITYERR 0x0000000400000000ULL
#define INFINIPATH_DC_COUNTERDISABLE 0x1000000000000000ULL
#define INFINIPATH_DC_COUNTERWREN 0x2000000000000000ULL
#define INFINIPATH_DC_FORCEIBCBUSTOSPCPARITYERR 0x4000000000000000ULL
#define INFINIPATH_DC_FORCEIBCBUSFRSPCPARITYERR 0x8000000000000000ULL
/* kr_ibcctrl bits */
#define INFINIPATH_IBCC_FLOWCTRLPERIOD_MASK 0xFFULL
#define INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT 0
#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_MASK 0xFFULL
#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
#define INFINIPATH_IBCC_LINKINITCMD_POLL 2 /* cycle through TS1/TS2 till OK */
#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3 /* wait for TS1, then go on */
#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
#define INFINIPATH_IBCC_LINKCMD_INIT 1 /* move to 0x11 */
#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
#define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
#define INFINIPATH_IBCC_LINKCMD_SHIFT 18
#define INFINIPATH_IBCC_MAXPKTLEN_MASK 0x7FFULL
#define INFINIPATH_IBCC_MAXPKTLEN_SHIFT 20
#define INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK 0xFULL
#define INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT 32
#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK 0xFULL
#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT 36
#define INFINIPATH_IBCC_CREDITSCALE_MASK 0x7ULL
#define INFINIPATH_IBCC_CREDITSCALE_SHIFT 40
#define INFINIPATH_IBCC_LOOPBACK 0x8000000000000000ULL
#define INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE 0x4000000000000000ULL
/* kr_ibcstatus bits */
#define INFINIPATH_IBCS_LINKTRAININGSTATE_MASK 0xF
#define INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT 0
#define INFINIPATH_IBCS_LINKSTATE_MASK 0x7
#define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
#define INFINIPATH_IBCS_TXREADY 0x40000000
#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00
#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01
#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02
#define INFINIPATH_IBCS_LT_STATE_POLLQUIET 0x03
#define INFINIPATH_IBCS_LT_STATE_SLEEPDELAY 0x04
#define INFINIPATH_IBCS_LT_STATE_SLEEPQUIET 0x05
#define INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE 0x08
#define INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG 0x09
#define INFINIPATH_IBCS_LT_STATE_CFGWAITRMT 0x0a
#define INFINIPATH_IBCS_LT_STATE_CFGIDLE 0x0b
#define INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN 0x0c
#define INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT 0x0e
#define INFINIPATH_IBCS_LT_STATE_RECOVERIDLE 0x0f
/* link state machine states (shift by INFINIPATH_IBCS_LINKSTATE_SHIFT) */
#define INFINIPATH_IBCS_L_STATE_DOWN 0x0
#define INFINIPATH_IBCS_L_STATE_INIT 0x1
#define INFINIPATH_IBCS_L_STATE_ARM 0x2
#define INFINIPATH_IBCS_L_STATE_ACTIVE 0x3
#define INFINIPATH_IBCS_L_STATE_ACT_DEFER 0x4
/* combination link status states that we use with some frequency */
#define IPATH_IBSTATE_MASK ((INFINIPATH_IBCS_LINKTRAININGSTATE_MASK \
<< INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
(INFINIPATH_IBCS_LINKSTATE_MASK \
<<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
#define IPATH_IBSTATE_INIT ((INFINIPATH_IBCS_L_STATE_INIT \
<< INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
(INFINIPATH_IBCS_LT_STATE_LINKUP \
<<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
#define IPATH_IBSTATE_ARM ((INFINIPATH_IBCS_L_STATE_ARM \
<< INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
(INFINIPATH_IBCS_LT_STATE_LINKUP \
<<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
#define IPATH_IBSTATE_ACTIVE ((INFINIPATH_IBCS_L_STATE_ACTIVE \
<< INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
(INFINIPATH_IBCS_LT_STATE_LINKUP \
<<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
/* kr_extstatus bits */
#define INFINIPATH_EXTS_SERDESPLLLOCK 0x1
#define INFINIPATH_EXTS_GPIOIN_MASK 0xFFFFULL
#define INFINIPATH_EXTS_GPIOIN_SHIFT 48
/* kr_extctrl bits */
#define INFINIPATH_EXTC_GPIOINVERT_MASK 0xFFFFULL
#define INFINIPATH_EXTC_GPIOINVERT_SHIFT 32
#define INFINIPATH_EXTC_GPIOOE_MASK 0xFFFFULL
#define INFINIPATH_EXTC_GPIOOE_SHIFT 48
#define INFINIPATH_EXTC_SERDESENABLE 0x80000000ULL
#define INFINIPATH_EXTC_SERDESCONNECT 0x40000000ULL
#define INFINIPATH_EXTC_SERDESENTRUNKING 0x20000000ULL
#define INFINIPATH_EXTC_SERDESDISRXFIFO 0x10000000ULL
#define INFINIPATH_EXTC_SERDESENPLPBK1 0x08000000ULL
#define INFINIPATH_EXTC_SERDESENPLPBK2 0x04000000ULL
#define INFINIPATH_EXTC_SERDESENENCDEC 0x02000000ULL
#define INFINIPATH_EXTC_LED1SECPORT_ON 0x00000020ULL
#define INFINIPATH_EXTC_LED2SECPORT_ON 0x00000010ULL
#define INFINIPATH_EXTC_LED1PRIPORT_ON 0x00000008ULL
#define INFINIPATH_EXTC_LED2PRIPORT_ON 0x00000004ULL
#define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL
#define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL
/* kr_mdio bits */
#define INFINIPATH_MDIO_CLKDIV_MASK 0x7FULL
#define INFINIPATH_MDIO_CLKDIV_SHIFT 32
#define INFINIPATH_MDIO_COMMAND_MASK 0x7ULL
#define INFINIPATH_MDIO_COMMAND_SHIFT 26
#define INFINIPATH_MDIO_DEVADDR_MASK 0x1FULL
#define INFINIPATH_MDIO_DEVADDR_SHIFT 21
#define INFINIPATH_MDIO_REGADDR_MASK 0x1FULL
#define INFINIPATH_MDIO_REGADDR_SHIFT 16
#define INFINIPATH_MDIO_DATA_MASK 0xFFFFULL
#define INFINIPATH_MDIO_DATA_SHIFT 0
#define INFINIPATH_MDIO_CMDVALID 0x0000000040000000ULL
#define INFINIPATH_MDIO_RDDATAVALID 0x0000000080000000ULL
/* kr_partitionkey bits */
#define INFINIPATH_PKEY_SIZE 16
#define INFINIPATH_PKEY_MASK 0xFFFF
#define INFINIPATH_PKEY_DEFAULT_PKEY 0xFFFF
/* kr_serdesconfig0 bits */
#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */
#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */
#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL /* tx idle enables (per lane) */
#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL /* rx detect enables (per lane) */
#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL /* L1 Power down; use with RXDETECT,
Otherwise not used on IB side */
/* kr_xgxsconfig bits */
#define INFINIPATH_XGXS_RESET 0x7ULL
#define INFINIPATH_XGXS_MDIOADDR_MASK 0xfULL
#define INFINIPATH_XGXS_MDIOADDR_SHIFT 4
#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */
/* TID entries (memory), HT400-only */
#define INFINIPATH_RT_VALID 0x8000000000000000ULL
#define INFINIPATH_RT_ADDR_SHIFT 0
#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFF
#define INFINIPATH_RT_BUFSIZE_SHIFT 48
/*
* IPATH_PIO_MAXIBHDR is the max IB header size allowed for in our
* PIO send buffers. This is well beyond anything currently
* defined in the InfiniBand spec.
*/
#define IPATH_PIO_MAXIBHDR 128
typedef u64 ipath_err_t;
/* mask of defined bits for various registers */
extern u64 infinipath_i_bitsextant;
extern ipath_err_t infinipath_e_bitsextant, infinipath_hwe_bitsextant;
/* masks that are different in various chips, or only exist in some chips */
extern u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask;
/*
* register bits for selecting i2c direction and values, used for I2C serial
* flash
*/
extern u16 ipath_gpio_sda_num, ipath_gpio_scl_num;
extern u64 ipath_gpio_sda, ipath_gpio_scl;
/*
* These are the infinipath general register numbers (not offsets).
* The kernel registers are used directly, those beyond the kernel
* registers are calculated from one of the base registers. The use of
* an integer type doesn't allow type-checking as thorough as, say,
* an enum but allows for better hiding of chip differences.
*/
typedef const u16 ipath_kreg, /* infinipath general registers */
ipath_creg, /* infinipath counter registers */
ipath_sreg; /* kernel-only, infinipath send registers */
/*
* These are the chip registers common to all infinipath chips, and
* used both by the kernel and the diagnostics or other user code.
* They are all implemented such that 64 bit accesses work.
* Some implement no more than 32 bits. Because 64 bit reads
* require 2 HT cmds on opteron, we access those with 32 bit
* reads for efficiency (they are written as 64 bits, since
* the extra 32 bits are nearly free on writes, and it slightly reduces
* complexity). The rest are all accessed as 64 bits.
*/
struct ipath_kregs {
/* These are the 32 bit group */
ipath_kreg kr_control;
ipath_kreg kr_counterregbase;
ipath_kreg kr_intmask;
ipath_kreg kr_intstatus;
ipath_kreg kr_pagealign;
ipath_kreg kr_portcnt;
ipath_kreg kr_rcvtidbase;
ipath_kreg kr_rcvtidcnt;
ipath_kreg kr_rcvegrbase;
ipath_kreg kr_rcvegrcnt;
ipath_kreg kr_scratch;
ipath_kreg kr_sendctrl;
ipath_kreg kr_sendpiobufbase;
ipath_kreg kr_sendpiobufcnt;
ipath_kreg kr_sendpiosize;
ipath_kreg kr_sendregbase;
ipath_kreg kr_userregbase;
/* These are the 64 bit group */
ipath_kreg kr_debugport;
ipath_kreg kr_debugportselect;
ipath_kreg kr_errorclear;
ipath_kreg kr_errormask;
ipath_kreg kr_errorstatus;
ipath_kreg kr_extctrl;
ipath_kreg kr_extstatus;
ipath_kreg kr_gpio_clear;
ipath_kreg kr_gpio_mask;
ipath_kreg kr_gpio_out;
ipath_kreg kr_gpio_status;
ipath_kreg kr_hwdiagctrl;
ipath_kreg kr_hwerrclear;
ipath_kreg kr_hwerrmask;
ipath_kreg kr_hwerrstatus;
ipath_kreg kr_ibcctrl;
ipath_kreg kr_ibcstatus;
ipath_kreg kr_intblocked;
ipath_kreg kr_intclear;
ipath_kreg kr_interruptconfig;
ipath_kreg kr_mdio;
ipath_kreg kr_partitionkey;
ipath_kreg kr_rcvbthqp;
ipath_kreg kr_rcvbufbase;
ipath_kreg kr_rcvbufsize;
ipath_kreg kr_rcvctrl;
ipath_kreg kr_rcvhdrcnt;
ipath_kreg kr_rcvhdrentsize;
ipath_kreg kr_rcvhdrsize;
ipath_kreg kr_rcvintmembase;
ipath_kreg kr_rcvintmemsize;
ipath_kreg kr_revision;
ipath_kreg kr_sendbuffererror;
ipath_kreg kr_sendpioavailaddr;
ipath_kreg kr_serdesconfig0;
ipath_kreg kr_serdesconfig1;
ipath_kreg kr_serdesstatus;
ipath_kreg kr_txintmembase;
ipath_kreg kr_txintmemsize;
ipath_kreg kr_xgxsconfig;
ipath_kreg kr_ibpllcfg;
/* use these two (and the following N ports) only with ipath_k*_kreg64_port();
* not *kreg64() */
ipath_kreg kr_rcvhdraddr;
ipath_kreg kr_rcvhdrtailaddr;
/* remaining registers are not present on all types of infinipath chips */
ipath_kreg kr_rcvpktledcnt;
ipath_kreg kr_pcierbuftestreg0;
ipath_kreg kr_pcierbuftestreg1;
ipath_kreg kr_pcieq0serdesconfig0;
ipath_kreg kr_pcieq0serdesconfig1;
ipath_kreg kr_pcieq0serdesstatus;
ipath_kreg kr_pcieq1serdesconfig0;
ipath_kreg kr_pcieq1serdesconfig1;
ipath_kreg kr_pcieq1serdesstatus;
};
struct ipath_cregs {
ipath_creg cr_badformatcnt;
ipath_creg cr_erricrccnt;
ipath_creg cr_errlinkcnt;
ipath_creg cr_errlpcrccnt;
ipath_creg cr_errpkey;
ipath_creg cr_errrcvflowctrlcnt;
ipath_creg cr_err_rlencnt;
ipath_creg cr_errslencnt;
ipath_creg cr_errtidfull;
ipath_creg cr_errtidvalid;
ipath_creg cr_errvcrccnt;
ipath_creg cr_ibstatuschange;
ipath_creg cr_intcnt;
ipath_creg cr_invalidrlencnt;
ipath_creg cr_invalidslencnt;
ipath_creg cr_lbflowstallcnt;
ipath_creg cr_iblinkdowncnt;
ipath_creg cr_iblinkerrrecovcnt;
ipath_creg cr_ibsymbolerrcnt;
ipath_creg cr_pktrcvcnt;
ipath_creg cr_pktrcvflowctrlcnt;
ipath_creg cr_pktsendcnt;
ipath_creg cr_pktsendflowcnt;
ipath_creg cr_portovflcnt;
ipath_creg cr_rcvebpcnt;
ipath_creg cr_rcvovflcnt;
ipath_creg cr_rxdroppktcnt;
ipath_creg cr_senddropped;
ipath_creg cr_sendstallcnt;
ipath_creg cr_sendunderruncnt;
ipath_creg cr_unsupvlcnt;
ipath_creg cr_wordrcvcnt;
ipath_creg cr_wordsendcnt;
};
#endif /* _IPATH_REGISTERS_H */
drivers/infiniband/hw/ipath/ips_common.h 0 → 100644
浏览文件 @ d41d3aeb
#ifndef IPS_COMMON_H
#define IPS_COMMON_H
/*
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "ipath_common.h"
struct ipath_header {
/*
* Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
* 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
* Port 3, TID 11, offset 14.
*/
__le32 ver_port_tid_offset;
__le16 chksum;
__le16 pkt_flags;
};
struct ips_message_header {
__be16 lrh[4];
__be32 bth[3];
/* fields below this point are in host byte order */
struct ipath_header iph;
__u8 sub_opcode;
__u8 flags;
__u16 src_rank;
/* 24 bits. The upper 8 bit is available for other use */
union {
struct {
unsigned ack_seq_num:24;
unsigned port:4;
unsigned unused:4;
};
__u32 ack_seq_num_org;
};
__u8 expected_tid_session_id;
__u8 tinylen; /* to aid MPI */
union {
__u16 tag; /* to aid MPI */
__u16 mqhdr; /* for PSM MQ */
};
union {
__u32 mpi[4]; /* to aid MPI */
__u32 data[4];
__u64 mq[2]; /* for PSM MQ */
struct {
__u16 mtu;
__u8 major_ver;
__u8 minor_ver;
__u32 not_used; //free
__u32 run_id;
__u32 client_ver;
};
};
};
struct ether_header {
__be16 lrh[4];
__be32 bth[3];
struct ipath_header iph;
__u8 sub_opcode;
__u8 cmd;
__be16 lid;
__u16 mac[3];
__u8 frag_num;
__u8 seq_num;
__le32 len;
/* MUST be of word size due to PIO write requirements */
__u32 csum;
__le16 csum_offset;
__le16 flags;
__u16 first_2_bytes;
__u8 unused[2]; /* currently unused */
};
/*
* The PIO buffer used for sending infinipath messages must only be written
* in 32-bit words, all the data must be written, and no writes can occur
* after the last word is written (which transfers "ownership" of the buffer
* to the chip and triggers the message to be sent).
* Since the Linux sk_buff structure can be recursive, non-aligned, and
* any number of bytes in each segment, we use the following structure
* to keep information about the overall state of the copy operation.
* This is used to save the information needed to store the checksum
* in the right place before sending the last word to the hardware and
* to buffer the last 0-3 bytes of non-word sized segments.
*/
struct copy_data_s {
struct ether_header *hdr;
/* addr of PIO buf to write csum to */
__u32 __iomem *csum_pio;
__u32 __iomem *to; /* addr of PIO buf to write data to */
__u32 device; /* which device to allocate PIO bufs from */
__s32 error; /* set if there is an error. */
__s32 extra; /* amount of data saved in u.buf below */
__u32 len; /* total length to send in bytes */
__u32 flen; /* frament length in words */
__u32 csum; /* partial IP checksum */
__u32 pos; /* position for partial checksum */
__u32 offset; /* offset to where data currently starts */
__s32 checksum_calc; /* set to 1 when csum has been calculated */
struct sk_buff *skb;
union {
__u32 w;
__u8 buf[4];
} u;
};
/* IB - LRH header consts */
#define IPS_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
#define IPS_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
#define IPS_OFFSET 0
/*
* defines the cut-off point between the header queue and eager/expected
* TID queue
*/
#define NUM_OF_EXTRA_WORDS_IN_HEADER_QUEUE \
((sizeof(struct ips_message_header) - \
offsetof(struct ips_message_header, iph)) >> 2)
/* OpCodes */
#define OPCODE_IPS 0xC0
#define OPCODE_ITH4X 0xC1
/* OpCode 30 is use by stand-alone test programs */
#define OPCODE_RAW_DATA 0xDE
/* last OpCode (31) is reserved for test */
#define OPCODE_TEST 0xDF
/* sub OpCodes - ips */
#define OPCODE_SEQ_DATA 0x01
#define OPCODE_SEQ_CTRL 0x02
#define OPCODE_SEQ_MQ_DATA 0x03
#define OPCODE_SEQ_MQ_CTRL 0x04
#define OPCODE_ACK 0x10
#define OPCODE_NAK 0x11
#define OPCODE_ERR_CHK 0x20
#define OPCODE_ERR_CHK_PLS 0x21
#define OPCODE_STARTUP 0x30
#define OPCODE_STARTUP_ACK 0x31
#define OPCODE_STARTUP_NAK 0x32
#define OPCODE_STARTUP_EXT 0x34
#define OPCODE_STARTUP_ACK_EXT 0x35
#define OPCODE_STARTUP_NAK_EXT 0x36
#define OPCODE_TIDS_RELEASE 0x40
#define OPCODE_TIDS_RELEASE_CONFIRM 0x41
#define OPCODE_CLOSE 0x50
#define OPCODE_CLOSE_ACK 0x51
/*
* like OPCODE_CLOSE, but no complaint if other side has already closed.
* Used when doing abort(), MPI_Abort(), etc.
*/
#define OPCODE_ABORT 0x52
/* sub OpCodes - ith4x */
#define OPCODE_ENCAP 0x81
#define OPCODE_LID_ARP 0x82
/* Receive Header Queue: receive type (from infinipath) */
#define RCVHQ_RCV_TYPE_EXPECTED 0
#define RCVHQ_RCV_TYPE_EAGER 1
#define RCVHQ_RCV_TYPE_NON_KD 2
#define RCVHQ_RCV_TYPE_ERROR 3
/* misc. */
#define SIZE_OF_CRC 1
#define EAGER_TID_ID INFINIPATH_I_TID_MASK
#define IPS_DEFAULT_P_KEY 0xFFFF
#define IPS_PERMISSIVE_LID 0xFFFF
#define IPS_MULTICAST_LID_BASE 0xC000
#define IPS_AETH_CREDIT_SHIFT 24
#define IPS_AETH_CREDIT_MASK 0x1F
#define IPS_AETH_CREDIT_INVAL 0x1F
#define IPS_PSN_MASK 0xFFFFFF
#define IPS_MSN_MASK 0xFFFFFF
#define IPS_QPN_MASK 0xFFFFFF
#define IPS_MULTICAST_QPN 0xFFFFFF
/* functions for extracting fields from rcvhdrq entries */
static inline __u32 ips_get_hdr_err_flags(const __le32 * rbuf)
{
return __le32_to_cpu(rbuf[1]);
}
static inline __u32 ips_get_index(const __le32 * rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
& INFINIPATH_RHF_EGRINDEX_MASK;
}
static inline __u32 ips_get_rcv_type(const __le32 * rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
& INFINIPATH_RHF_RCVTYPE_MASK;
}
static inline __u32 ips_get_length_in_bytes(const __le32 * rbuf)
{
return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
& INFINIPATH_RHF_LENGTH_MASK) << 2;
}
static inline void *ips_get_first_protocol_header(const __u32 * rbuf)
{
return (void *)&rbuf[2];
}
static inline struct ips_message_header *ips_get_ips_header(const __u32 *
rbuf)
{
return (struct ips_message_header *)&rbuf[2];
}
static inline __u32 ips_get_ipath_ver(__le32 hdrword)
{
return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
& INFINIPATH_I_VERS_MASK;
}
#endif /* IPS_COMMON_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或