提交 d3d2176a 编写于 作者: D David Gibson 提交者: Paul Mackerras

[PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpc

This patch moves a bunch more files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	hvcall.h
	proc_ppc64.c
	sysfs.c
	lparcfg.c
	rtas_pci.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 0f34f490
......@@ -16,13 +16,17 @@ obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o \
paca.o ioctl32.o cpu_setup_power4.o \
firmware.o
firmware.o sysfs.o
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o
obj-$(CONFIG_PPC_RTAS) += rtas.o
procfs-$(CONFIG_PPC64) := proc_ppc64.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64) := rtas_pci.o
obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y)
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
......
......@@ -97,7 +97,7 @@ static unsigned long get_purr(void)
#define lparcfg_write NULL
/*
/*
* Methods used to fetch LPAR data when running on an iSeries platform.
*/
static int lparcfg_data(struct seq_file *m, void *v)
......@@ -169,7 +169,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
#endif /* CONFIG_PPC_ISERIES */
#ifdef CONFIG_PPC_PSERIES
/*
/*
* Methods used to fetch LPAR data when running on a pSeries platform.
*/
......@@ -178,7 +178,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
* entitled_capacity,unallocated_capacity,
* aggregation, resource_capability).
*
* R4 = Entitled Processor Capacity Percentage.
* R4 = Entitled Processor Capacity Percentage.
* R5 = Unallocated Processor Capacity Percentage.
* R6 (AABBCCDDEEFFGGHH).
* XXXX - reserved (0)
......@@ -191,7 +191,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
* XX - variable processor Capacity Weight
* XX - Unallocated Variable Processor Capacity Weight.
* XXXX - Active processors in Physical Processor Pool.
* XXXX - Processors active on platform.
* XXXX - Processors active on platform.
*/
static unsigned int h_get_ppp(unsigned long *entitled,
unsigned long *unallocated,
......@@ -274,7 +274,7 @@ static void parse_system_parameter_string(struct seq_file *m)
if (!workbuffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
__FILE__, __FUNCTION__, __LINE__);
kfree(local_buffer);
kfree(local_buffer);
return;
}
#ifdef LPARCFG_DEBUG
......
/*
* arch/ppc64/kernel/proc_ppc64.c
*
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
......
......@@ -232,7 +232,7 @@ static void register_cpu_online(unsigned int cpu)
sysdev_create_file(s, &attr_pmc7);
if (cur_cpu_spec->num_pmcs >= 8)
sysdev_create_file(s, &attr_pmc8);
if (cpu_has_feature(CPU_FTR_SMT))
sysdev_create_file(s, &attr_purr);
}
......
......@@ -15,7 +15,7 @@ obj-y += idle.o dma.o \
align.o \
udbg.o \
rtc.o \
iommu.o sysfs.o vdso.o
iommu.o vdso.o
obj-y += vdso32/ vdso64/
pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o
......@@ -30,13 +30,10 @@ endif
obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
obj-$(CONFIG_KEXEC) += machine_kexec.o
obj-$(CONFIG_PROC_FS) += proc_ppc64.o
obj-$(CONFIG_MODULES) += module.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_MODULES) += ppc_ksyms.o
endif
obj-$(CONFIG_PPC_RTAS) += rtas_pci.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_BOOTX_TEXT) += btext.o
......
#ifndef _PPC64_HVCALL_H
#define _PPC64_HVCALL_H
#ifndef _ASM_POWERPC_HVCALL_H
#define _ASM_POWERPC_HVCALL_H
#define HVSC .long 0x44000022
......@@ -138,7 +138,7 @@ long plpar_hcall(unsigned long opcode,
*/
long plpar_hcall_norets(unsigned long opcode, ...);
/*
/*
* Special hcall interface for ibmveth support.
* Takes 8 input parms. Returns a rc and stores the
* R4 return value in *out1.
......@@ -153,11 +153,11 @@ long plpar_hcall_8arg_2ret(unsigned long opcode,
unsigned long arg7,
unsigned long arg8,
unsigned long *out1);
/* plpar_hcall_4out()
*
* same as plpar_hcall except with 4 output arguments.
*
* same as plpar_hcall except with 4 output arguments.
*
*/
long plpar_hcall_4out(unsigned long opcode,
unsigned long arg1,
......@@ -170,4 +170,4 @@ long plpar_hcall_4out(unsigned long opcode,
unsigned long *out4);
#endif /* __ASSEMBLY__ */
#endif /* _PPC64_HVCALL_H */
#endif /* _ASM_POWERPC_HVCALL_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册