Merge tag 'extcon-next-for-5.10-v2' of...

Merge tag 'extcon-next-for-5.10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Detailed description for this pull request:

1. Update extcon driver with minor updates:
- Covert the devicetree binding format from txt to yaml and edit
  the bidning document for extcon-ptn5150.c.

- Clean-up the code of extcon-ptn5150.c without any behavior changes.

- Replace HTTP links with HTTPS ones on extcon-palmas.c and extcon-usb-gpio.c.

- Return the proper error code on extcon-max14577/max77693/max77843.c.

- Simplify with dev_err_probe() on extcon-palmas.c.

- Use module_platform_driver to simplify the code on extcon-axp288.c.

2. Update MAINTAINERS
- Add Krzysztof Kozlowski as maintainer of NXP PTN5150A CC/extcon driver
to provide review, feedback and testing.

* tag 'extcon-next-for-5.10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: (25 commits)
  extcon: axp288: Use module_platform_driver to simplify the code
  extcon: ptn5150: Do not print error during probe if nothing is attached
  extcon: ptn5150: Use defines for registers
  extcon: palmas: Simplify with dev_err_probe()
  extcon: max8997: Return error code of extcon_dev_allocate()
  extcon: max77843: Return error code of extcon_dev_allocate()
  extcon: max77693: Return error code of extcon_dev_allocate()
  extcon: max14577: Return error code of extcon_dev_allocate()
  extcon: ptn5150: Set the VBUS and POLARITY property capability
  extcon: ptn5150: Switch to GENMASK() and BIT() macros
  extcon: ptn5150: Deduplicate parts of dev_err_probe()
  extcon: Replace HTTP links with HTTPS ones
  MAINTAINERS: Add entry for NXP PTN5150A CC driver
  extcon: ptn5150: Convert to .probe_new
  extcon: ptn5150: Convert to module_i2c_driver
  extcon: ptn5150: Reduce the amount of logs on deferred probe
  extcon: ptn5150: Make 'vbus-gpios' optional
  extcon: ptn5150: Check current USB mode when probing
  extcon: ptn5150: Lower the noisiness of probe
  extcon: ptn5150: Simplify getting vbus-gpios with flags
  ...

Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt

-* PTN5150 CC (Configuration Channel) Logic device
-
-PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
-connector application with CC control logic detection and indication functions.
-It is interfaced to the host controller using an I2C interface.
-
-Required properties:
-- compatible: should be "nxp,ptn5150"
-- reg: specifies the I2C slave address of the device
-- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin
-	connected to the PTN5150's INTB pin.
-- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which
-	is used to control VBUS.
-- pinctrl-names : a pinctrl state named "default" must be defined.
-- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus
-	control.
-
-Example:
-	ptn5150@1d {
-		compatible = "nxp,ptn5150";
-		reg = <0x1d>;
-		int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
-		vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ptn5150_default>;
-		status = "okay";
-	};

Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PTN5150 CC (Configuration Channel) Logic device
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+  connector application with CC control logic detection and indication
+  functions.  It is interfaced to the host controller using an I2C interface.
+
+properties:
+  compatible:
+    const: nxp,ptn5150
+
+  int-gpios:
+    deprecated: true
+    description:
+      GPIO pin (input) connected to the PTN5150's INTB pin.
+      Use "interrupts" instead.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vbus-gpios:
+    description:
+      GPIO pin (output) used to control VBUS. If skipped, no such control
+      takes place.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ptn5150@1d {
+            compatible = "nxp,ptn5150";
+            reg = <0x1d>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+            vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+        };
+    };

MAINTAINERS

@@ -12485,6 +12485,13 @@ F:	drivers/iio/gyro/fxas21002c_core.c
 F:	drivers/iio/gyro/fxas21002c_i2c.c
 F:	drivers/iio/gyro/fxas21002c_spi.c
 
+NXP PTN5150A CC LOGIC AND EXTCON DRIVER
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+F:	drivers/extcon/extcon-ptn5150.c
+
 NXP SGTL5000 DRIVER
 M:	Fabio Estevam <festevam@gmail.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

drivers/extcon/extcon-axp288.c

@@ -491,18 +491,7 @@ static struct platform_driver axp288_extcon_driver = {
 		.pm = &axp288_extcon_pm_ops,
 	},
 };
-
-static int __init axp288_extcon_init(void)
-{
-	return platform_driver_register(&axp288_extcon_driver);
-}
-module_init(axp288_extcon_init);
-
-static void __exit axp288_extcon_exit(void)
-{
-	platform_driver_unregister(&axp288_extcon_driver);
-}
-module_exit(axp288_extcon_exit);
+module_platform_driver(axp288_extcon_driver);
 
 MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");

drivers/extcon/extcon-max14577.c

@@ -713,7 +713,7 @@ static int max14577_muic_probe(struct platform_device *pdev)
 					      max14577_extcon_cable);
 	if (IS_ERR(info->edev)) {
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
-		return -ENOMEM;
+		return PTR_ERR(info->edev);
 	}
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);

drivers/extcon/extcon-max77693.c

@@ -1157,7 +1157,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
 					      max77693_extcon_cable);
 	if (IS_ERR(info->edev)) {
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
-		return -ENOMEM;
+		return PTR_ERR(info->edev);
 	}
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);

drivers/extcon/extcon-max77843.c

@@ -845,7 +845,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
 			max77843_extcon_cable);
 	if (IS_ERR(info->edev)) {
 		dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
-		ret = -ENODEV;
+		ret = PTR_ERR(info->edev);
 		goto err_muic_irq;
 	}
 

drivers/extcon/extcon-max8997.c

@@ -674,7 +674,7 @@ static int max8997_muic_probe(struct platform_device *pdev)
 	info->edev = devm_extcon_dev_allocate(&pdev->dev, max8997_extcon_cable);
 	if (IS_ERR(info->edev)) {
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
-		ret = -ENOMEM;
+		ret = PTR_ERR(info->edev);
 		goto err_irq;
 	}
 

drivers/extcon/extcon-palmas.c

@@ -2,7 +2,7 @@
 /*
  * Palmas USB transceiver driver
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
  * Author: Graeme Gregory <gg@slimlogic.co.uk>
  * Author: Kishon Vijay Abraham I <kishon@ti.com>
  * Based on twl6030_usb.c
@@ -205,21 +205,15 @@ static int palmas_usb_probe(struct platform_device *pdev)
 
 	palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id",
 							GPIOD_IN);
-	if (PTR_ERR(palmas_usb->id_gpiod) == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
-	} else if (IS_ERR(palmas_usb->id_gpiod)) {
-		dev_err(&pdev->dev, "failed to get id gpio\n");
-		return PTR_ERR(palmas_usb->id_gpiod);
-	}
+	if (IS_ERR(palmas_usb->id_gpiod))
+		return dev_err_probe(&pdev->dev, PTR_ERR(palmas_usb->id_gpiod),
+				     "failed to get id gpio\n");
 
 	palmas_usb->vbus_gpiod = devm_gpiod_get_optional(&pdev->dev, "vbus",
 							GPIOD_IN);
-	if (PTR_ERR(palmas_usb->vbus_gpiod) == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
-	} else if (IS_ERR(palmas_usb->vbus_gpiod)) {
-		dev_err(&pdev->dev, "failed to get vbus gpio\n");
-		return PTR_ERR(palmas_usb->vbus_gpiod);
-	}
+	if (IS_ERR(palmas_usb->vbus_gpiod))
+		return dev_err_probe(&pdev->dev, PTR_ERR(palmas_usb->vbus_gpiod),
+				     "failed to get id gpio\n");
 
 	if (palmas_usb->enable_id_detection && palmas_usb->id_gpiod) {
 		palmas_usb->enable_id_detection = false;

drivers/extcon/extcon-ptn5150.c

@@ -5,7 +5,9 @@
 // Based on extcon-sm5502.c driver
 // Copyright (c) 2018-2019 by Vijai Kumar K
 // Author: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
+// Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
 
+#include <linux/bitfield.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -17,46 +19,28 @@
 #include <linux/gpio/consumer.h>
 
 /* PTN5150 registers */
-enum ptn5150_reg {
-	PTN5150_REG_DEVICE_ID = 0x01,
-	PTN5150_REG_CONTROL,
-	PTN5150_REG_INT_STATUS,
-	PTN5150_REG_CC_STATUS,
-	PTN5150_REG_CON_DET = 0x09,
-	PTN5150_REG_VCONN_STATUS,
-	PTN5150_REG_RESET,
-	PTN5150_REG_INT_MASK = 0x18,
-	PTN5150_REG_INT_REG_STATUS,
-	PTN5150_REG_END,
-};
+#define PTN5150_REG_DEVICE_ID			0x01
+#define PTN5150_REG_CONTROL			0x02
+#define PTN5150_REG_INT_STATUS			0x03
+#define PTN5150_REG_CC_STATUS			0x04
+#define PTN5150_REG_CON_DET			0x09
+#define PTN5150_REG_VCONN_STATUS		0x0a
+#define PTN5150_REG_RESET			0x0b
+#define PTN5150_REG_INT_MASK			0x18
+#define PTN5150_REG_INT_REG_STATUS		0x19
+#define PTN5150_REG_END				PTN5150_REG_INT_REG_STATUS
 
 #define PTN5150_DFP_ATTACHED			0x1
 #define PTN5150_UFP_ATTACHED			0x2
 
 /* Define PTN5150 MASK/SHIFT constant */
-#define PTN5150_REG_DEVICE_ID_VENDOR_SHIFT	0
-#define PTN5150_REG_DEVICE_ID_VENDOR_MASK	\
-	(0x3 << PTN5150_REG_DEVICE_ID_VENDOR_SHIFT)
-
-#define PTN5150_REG_DEVICE_ID_VERSION_SHIFT	3
-#define PTN5150_REG_DEVICE_ID_VERSION_MASK	\
-	(0x1f << PTN5150_REG_DEVICE_ID_VERSION_SHIFT)
-
-#define PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT	2
-#define PTN5150_REG_CC_PORT_ATTACHMENT_MASK	\
-	(0x7 << PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT)
+#define PTN5150_REG_DEVICE_ID_VERSION		GENMASK(7, 3)
+#define PTN5150_REG_DEVICE_ID_VENDOR		GENMASK(2, 0)
 
-#define PTN5150_REG_CC_VBUS_DETECTION_SHIFT	7
-#define PTN5150_REG_CC_VBUS_DETECTION_MASK	\
-	(0x1 << PTN5150_REG_CC_VBUS_DETECTION_SHIFT)
-
-#define PTN5150_REG_INT_CABLE_ATTACH_SHIFT	0
-#define PTN5150_REG_INT_CABLE_ATTACH_MASK	\
-	(0x1 << PTN5150_REG_INT_CABLE_ATTACH_SHIFT)
-
-#define PTN5150_REG_INT_CABLE_DETACH_SHIFT	1
-#define PTN5150_REG_INT_CABLE_DETACH_MASK	\
-	(0x1 << PTN5150_REG_CC_CABLE_DETACH_SHIFT)
+#define PTN5150_REG_CC_PORT_ATTACHMENT		GENMASK(4, 2)
+#define PTN5150_REG_CC_VBUS_DETECTION		BIT(7)
+#define PTN5150_REG_INT_CABLE_ATTACH_MASK	BIT(0)
+#define PTN5150_REG_INT_CABLE_DETACH_MASK	BIT(1)
 
 struct ptn5150_info {
 	struct device *dev;
@@ -83,12 +67,45 @@ static const struct regmap_config ptn5150_regmap_config = {
 	.max_register	= PTN5150_REG_END,
 };
 
+static void ptn5150_check_state(struct ptn5150_info *info)
+{
+	unsigned int port_status, reg_data, vbus;
+	int ret;
+
+	ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev, "failed to read CC STATUS %d\n", ret);
+		return;
+	}
+
+	port_status = FIELD_GET(PTN5150_REG_CC_PORT_ATTACHMENT, reg_data);
+
+	switch (port_status) {
+	case PTN5150_DFP_ATTACHED:
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
+		gpiod_set_value_cansleep(info->vbus_gpiod, 0);
+		extcon_set_state_sync(info->edev, EXTCON_USB, true);
+		break;
+	case PTN5150_UFP_ATTACHED:
+		extcon_set_state_sync(info->edev, EXTCON_USB, false);
+		vbus = FIELD_GET(PTN5150_REG_CC_VBUS_DETECTION, reg_data);
+		if (vbus)
+			gpiod_set_value_cansleep(info->vbus_gpiod, 0);
+		else
+			gpiod_set_value_cansleep(info->vbus_gpiod, 1);
+
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
+		break;
+	default:
+		break;
+	}
+}
+
 static void ptn5150_irq_work(struct work_struct *work)
 {
 	struct ptn5150_info *info = container_of(work,
 			struct ptn5150_info, irq_work);
 	int ret = 0;
-	unsigned int reg_data;
 	unsigned int int_status;
 
 	if (!info->edev)
@@ -96,13 +113,6 @@ static void ptn5150_irq_work(struct work_struct *work)
 
 	mutex_lock(&info->mutex);
 
-	ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
-	if (ret) {
-		dev_err(info->dev, "failed to read CC STATUS %d\n", ret);
-		mutex_unlock(&info->mutex);
-		return;
-	}
-
 	/* Clear interrupt. Read would clear the register */
 	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &int_status);
 	if (ret) {
@@ -116,47 +126,13 @@ static void ptn5150_irq_work(struct work_struct *work)
 
 		cable_attach = int_status & PTN5150_REG_INT_CABLE_ATTACH_MASK;
 		if (cable_attach) {
-			unsigned int port_status;
-			unsigned int vbus;
-
-			port_status = ((reg_data &
-					PTN5150_REG_CC_PORT_ATTACHMENT_MASK) >>
-					PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT);
-
-			switch (port_status) {
-			case PTN5150_DFP_ATTACHED:
-				extcon_set_state_sync(info->edev,
-						EXTCON_USB_HOST, false);
-				gpiod_set_value(info->vbus_gpiod, 0);
-				extcon_set_state_sync(info->edev, EXTCON_USB,
-						true);
-				break;
-			case PTN5150_UFP_ATTACHED:
-				extcon_set_state_sync(info->edev, EXTCON_USB,
-						false);
-				vbus = ((reg_data &
-					PTN5150_REG_CC_VBUS_DETECTION_MASK) >>
-					PTN5150_REG_CC_VBUS_DETECTION_SHIFT);
-				if (vbus)
-					gpiod_set_value(info->vbus_gpiod, 0);
-				else
-					gpiod_set_value(info->vbus_gpiod, 1);
-
-				extcon_set_state_sync(info->edev,
-						EXTCON_USB_HOST, true);
-				break;
-			default:
-				dev_err(info->dev,
-					"Unknown Port status : %x\n",
-					port_status);
-				break;
-			}
+			ptn5150_check_state(info);
 		} else {
 			extcon_set_state_sync(info->edev,
 					EXTCON_USB_HOST, false);
 			extcon_set_state_sync(info->edev,
 					EXTCON_USB, false);
-			gpiod_set_value(info->vbus_gpiod, 0);
+			gpiod_set_value_cansleep(info->vbus_gpiod, 0);
 		}
 	}
 
@@ -194,13 +170,10 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
 		return -EINVAL;
 	}
 
-	vendor_id = ((reg_data & PTN5150_REG_DEVICE_ID_VENDOR_MASK) >>
-				PTN5150_REG_DEVICE_ID_VENDOR_SHIFT);
-	version_id = ((reg_data & PTN5150_REG_DEVICE_ID_VERSION_MASK) >>
-				PTN5150_REG_DEVICE_ID_VERSION_SHIFT);
-
-	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
-			    version_id, vendor_id);
+	vendor_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VENDOR, reg_data);
+	version_id = FIELD_GET(PTN5150_REG_DEVICE_ID_VERSION, reg_data);
+	dev_dbg(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+		version_id, vendor_id);
 
 	/* Clear any existing interrupts */
 	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
@@ -221,8 +194,7 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
 	return 0;
 }
 
-static int ptn5150_i2c_probe(struct i2c_client *i2c,
-				 const struct i2c_device_id *id)
+static int ptn5150_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
 	struct device_node *np = i2c->dev.of_node;
@@ -239,20 +211,15 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c,
 
 	info->dev = &i2c->dev;
 	info->i2c = i2c;
-	info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
-	if (IS_ERR(info->int_gpiod)) {
-		dev_err(dev, "failed to get INT GPIO\n");
-		return PTR_ERR(info->int_gpiod);
-	}
-	info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_IN);
+	info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_OUT_LOW);
 	if (IS_ERR(info->vbus_gpiod)) {
-		dev_err(dev, "failed to get VBUS GPIO\n");
-		return PTR_ERR(info->vbus_gpiod);
-	}
-	ret = gpiod_direction_output(info->vbus_gpiod, 0);
-	if (ret) {
-		dev_err(dev, "failed to set VBUS GPIO direction\n");
-		return -EINVAL;
+		ret = PTR_ERR(info->vbus_gpiod);
+		if (ret == -ENOENT) {
+			dev_info(dev, "No VBUS GPIO, ignoring VBUS control\n");
+			info->vbus_gpiod = NULL;
+		} else {
+			return dev_err_probe(dev, ret, "failed to get VBUS GPIO\n");
+		}
 	}
 
 	mutex_init(&info->mutex);
@@ -261,28 +228,34 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c,
 
 	info->regmap = devm_regmap_init_i2c(i2c, &ptn5150_regmap_config);
 	if (IS_ERR(info->regmap)) {
-		ret = PTR_ERR(info->regmap);
-		dev_err(info->dev, "failed to allocate register map: %d\n",
-				   ret);
-		return ret;
+		return dev_err_probe(info->dev, PTR_ERR(info->regmap),
+				     "failed to allocate register map\n");
 	}
 
-	if (info->int_gpiod) {
+	if (i2c->irq > 0) {
+		info->irq = i2c->irq;
+	} else {
+		info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
+		if (IS_ERR(info->int_gpiod)) {
+			return dev_err_probe(dev, PTR_ERR(info->int_gpiod),
+					     "failed to get INT GPIO\n");
+		}
+
 		info->irq = gpiod_to_irq(info->int_gpiod);
 		if (info->irq < 0) {
 			dev_err(dev, "failed to get INTB IRQ\n");
 			return info->irq;
 		}
+	}
 
-		ret = devm_request_threaded_irq(dev, info->irq, NULL,
-						ptn5150_irq_handler,
-						IRQF_TRIGGER_FALLING |
-						IRQF_ONESHOT,
-						i2c->name, info);
-		if (ret < 0) {
-			dev_err(dev, "failed to request handler for INTB IRQ\n");
-			return ret;
-		}
+	ret = devm_request_threaded_irq(dev, info->irq, NULL,
+					ptn5150_irq_handler,
+					IRQF_TRIGGER_FALLING |
+					IRQF_ONESHOT,
+					i2c->name, info);
+	if (ret < 0) {
+		dev_err(dev, "failed to request handler for INTB IRQ\n");
+		return ret;
 	}
 
 	/* Allocate extcon device */
@@ -299,11 +272,26 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+					EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+					EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+					EXTCON_PROP_USB_TYPEC_POLARITY);
+
 	/* Initialize PTN5150 device and print vendor id and version id */
 	ret = ptn5150_init_dev_type(info);
 	if (ret)
 		return -EINVAL;
 
+	/*
+	 * Update current extcon state if for example OTG connection was there
+	 * before the probe
+	 */
+	mutex_lock(&info->mutex);
+	ptn5150_check_state(info);
+	mutex_unlock(&info->mutex);
+
 	return 0;
 }
 
@@ -324,16 +312,12 @@ static struct i2c_driver ptn5150_i2c_driver = {
 		.name	= "ptn5150",
 		.of_match_table = ptn5150_dt_match,
 	},
-	.probe	= ptn5150_i2c_probe,
+	.probe_new	= ptn5150_i2c_probe,
 	.id_table = ptn5150_i2c_id,
 };
-
-static int __init ptn5150_i2c_init(void)
-{
-	return i2c_add_driver(&ptn5150_i2c_driver);
-}
-subsys_initcall(ptn5150_i2c_init);
+module_i2c_driver(ptn5150_i2c_driver);
 
 MODULE_DESCRIPTION("NXP PTN5150 CC logic Extcon driver");
 MODULE_AUTHOR("Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_LICENSE("GPL v2");

drivers/extcon/extcon-usb-gpio.c

@@ -2,7 +2,7 @@
 /**
  * drivers/extcon/extcon-usb-gpio.c - USB GPIO extcon driver
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com
  * Author: Roger Quadros <rogerq@ti.com>
  */