fbdev: mxsfb: Add support for mx6sl and mx6sx

mx6sl and mx6sx share the same LCD controller as mx23 and mx28.

Add support for it.

The basic difference is the number of clocks that are required:

- mx23/mx28: only one clock
- mx6sl: two clocks
- mx6sx: three clocks
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/fbdev/Kconfig

@@ -2425,7 +2425,7 @@ config FB_JZ4740
 
 config FB_MXS
 	tristate "MXS LCD framebuffer support"
-	depends on FB && ARCH_MXS
+	depends on FB && (ARCH_MXS || ARCH_MXC)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT

drivers/video/fbdev/mxsfb.c

@@ -172,6 +172,8 @@ struct mxsfb_info {
 	struct fb_info fb_info;
 	struct platform_device *pdev;
 	struct clk *clk;
+	struct clk *clk_axi;
+	struct clk *clk_disp_axi;
 	void __iomem *base;	/* registers */
 	unsigned allocated_size;
 	int enabled;
@@ -331,6 +333,11 @@ static void mxsfb_enable_controller(struct fb_info *fb_info)
 		}
 	}
 
+	if (host->clk_axi)
+		clk_prepare_enable(host->clk_axi);
+
+	if (host->clk_disp_axi)
+		clk_prepare_enable(host->clk_disp_axi);
 	clk_prepare_enable(host->clk);
 	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
 
@@ -374,6 +381,10 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
 	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
 
 	clk_disable_unprepare(host->clk);
+	if (host->clk_disp_axi)
+		clk_disable_unprepare(host->clk_disp_axi);
+	if (host->clk_axi)
+		clk_disable_unprepare(host->clk_axi);
 
 	host->enabled = 0;
 
@@ -867,6 +878,14 @@ static int mxsfb_probe(struct platform_device *pdev)
 		goto fb_release;
 	}
 
+	host->clk_axi = devm_clk_get(&host->pdev->dev, "axi");
+	if (IS_ERR(host->clk_axi))
+		host->clk_axi = NULL;
+
+	host->clk_disp_axi = devm_clk_get(&host->pdev->dev, "disp_axi");
+	if (IS_ERR(host->clk_disp_axi))
+		host->clk_disp_axi = NULL;
+
 	host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
 	if (IS_ERR(host->reg_lcd))
 		host->reg_lcd = NULL;