Merge tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here are some small Staging and IIO driver fixes for 5.10-rc5. They
  include:

   - IIO fixes for reported regressions and problems

   - new device ids for IIO drivers

   - new device id for rtl8723bs driver

   - staging ralink driver Kconfig dependency fix

   - staging mt7621-pci bus resource fix

  All of these have been in linux-next all week with no reported issues"

* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
  staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
  staging: mt7621-pci: avoid to request pci bus resources
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -109,30 +109,6 @@ Description:
 		When counting down the counter start from preset value
 		and fire event when reach 0.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		channel_A:
-			Encoder A input servers as the count input and B as
-			the UP/DOWN direction control input.
-
-		channel_B:
-			Encoder B input serves as the count input and A as
-			the UP/DOWN direction control input.
-
-		quadrature:
-			Encoder A and B inputs are mixed to get direction
-			and count with a scale of 0.25.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com

drivers/counter/ti-eqep.c

@@ -368,7 +368,7 @@ static const struct regmap_config ti_eqep_regmap32_config = {
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
-	.max_register = 0x24,
+	.max_register = QUPRD,
 };
 
 static const struct regmap_config ti_eqep_regmap16_config = {
@@ -376,7 +376,7 @@ static const struct regmap_config ti_eqep_regmap16_config = {
 	.reg_bits = 16,
 	.val_bits = 16,
 	.reg_stride = 2,
-	.max_register = 0x1e,
+	.max_register = QCPRDLAT,
 };
 
 static int ti_eqep_probe(struct platform_device *pdev)

drivers/iio/accel/kxcjk-1013.c

@@ -126,6 +126,12 @@ enum kx_chipset {
 	KX_MAX_CHIPS /* this must be last */
 };
 
+enum kx_acpi_type {
+	ACPI_GENERIC,
+	ACPI_SMO8500,
+	ACPI_KIOX010A,
+};
+
 struct kxcjk1013_data {
 	struct i2c_client *client;
 	struct iio_trigger *dready_trig;
@@ -143,7 +149,7 @@ struct kxcjk1013_data {
 	bool motion_trigger_on;
 	int64_t timestamp;
 	enum kx_chipset chipset;
-	bool is_smo8500_device;
+	enum kx_acpi_type acpi_type;
 };
 
 enum kxcjk1013_axis {
@@ -270,6 +276,32 @@ static const struct {
 			      {19163, 1, 0},
 			      {38326, 0, 1} };
 
+#ifdef CONFIG_ACPI
+enum kiox010a_fn_index {
+	KIOX010A_SET_LAPTOP_MODE = 1,
+	KIOX010A_SET_TABLET_MODE = 2,
+};
+
+static int kiox010a_dsm(struct device *dev, int fn_index)
+{
+	acpi_handle handle = ACPI_HANDLE(dev);
+	guid_t kiox010a_dsm_guid;
+	union acpi_object *obj;
+
+	if (!handle)
+		return -ENODEV;
+
+	guid_parse("1f339696-d475-4e26-8cad-2e9f8e6d7a91", &kiox010a_dsm_guid);
+
+	obj = acpi_evaluate_dsm(handle, &kiox010a_dsm_guid, 1, fn_index, NULL);
+	if (!obj)
+		return -EIO;
+
+	ACPI_FREE(obj);
+	return 0;
+}
+#endif
+
 static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
 			      enum kxcjk1013_mode mode)
 {
@@ -347,6 +379,13 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 {
 	int ret;
 
+#ifdef CONFIG_ACPI
+	if (data->acpi_type == ACPI_KIOX010A) {
+		/* Make sure the kbd and touchpad on 2-in-1s using 2 KXCJ91008-s work */
+		kiox010a_dsm(&data->client->dev, KIOX010A_SET_LAPTOP_MODE);
+	}
+#endif
+
 	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading who_am_i\n");
@@ -1247,7 +1286,7 @@ static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
 
 static const char *kxcjk1013_match_acpi_device(struct device *dev,
 					       enum kx_chipset *chipset,
-					       bool *is_smo8500_device)
+					       enum kx_acpi_type *acpi_type)
 {
 	const struct acpi_device_id *id;
 
@@ -1256,7 +1295,9 @@ static const char *kxcjk1013_match_acpi_device(struct device *dev,
 		return NULL;
 
 	if (strcmp(id->id, "SMO8500") == 0)
-		*is_smo8500_device = true;
+		*acpi_type = ACPI_SMO8500;
+	else if (strcmp(id->id, "KIOX010A") == 0)
+		*acpi_type = ACPI_KIOX010A;
 
 	*chipset = (enum kx_chipset)id->driver_data;
 
@@ -1299,7 +1340,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
 	} else if (ACPI_HANDLE(&client->dev)) {
 		name = kxcjk1013_match_acpi_device(&client->dev,
 						   &data->chipset,
-						   &data->is_smo8500_device);
+						   &data->acpi_type);
 	} else
 		return -ENODEV;
 
@@ -1316,7 +1357,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &kxcjk1013_info;
 
-	if (client->irq > 0 && !data->is_smo8500_device) {
+	if (client->irq > 0 && data->acpi_type != ACPI_SMO8500) {
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
 						kxcjk1013_data_rdy_trig_poll,
 						kxcjk1013_event_handler,

drivers/iio/adc/ingenic-adc.c

@@ -71,7 +71,7 @@
 #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS	10
 #define JZ4740_ADC_BATTERY_HIGH_VREF		(7500 * 0.986)
 #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS	12
-#define JZ4770_ADC_BATTERY_VREF			6600
+#define JZ4770_ADC_BATTERY_VREF			1200
 #define JZ4770_ADC_BATTERY_VREF_BITS		12
 
 #define JZ_ADC_IRQ_AUX			BIT(0)
@@ -177,13 +177,12 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc,
 	mutex_unlock(&adc->lock);
 }
 
-static void ingenic_adc_enable(struct ingenic_adc *adc,
-			       int engine,
-			       bool enabled)
+static void ingenic_adc_enable_unlocked(struct ingenic_adc *adc,
+					int engine,
+					bool enabled)
 {
 	u8 val;
 
-	mutex_lock(&adc->lock);
 	val = readb(adc->base + JZ_ADC_REG_ENABLE);
 
 	if (enabled)
@@ -192,20 +191,41 @@ static void ingenic_adc_enable(struct ingenic_adc *adc,
 		val &= ~BIT(engine);
 
 	writeb(val, adc->base + JZ_ADC_REG_ENABLE);
+}
+
+static void ingenic_adc_enable(struct ingenic_adc *adc,
+			       int engine,
+			       bool enabled)
+{
+	mutex_lock(&adc->lock);
+	ingenic_adc_enable_unlocked(adc, engine, enabled);
 	mutex_unlock(&adc->lock);
 }
 
 static int ingenic_adc_capture(struct ingenic_adc *adc,
 			       int engine)
 {
+	u32 cfg;
 	u8 val;
 	int ret;
 
-	ingenic_adc_enable(adc, engine, true);
+	/*
+	 * Disable CMD_SEL temporarily, because it causes wrong VBAT readings,
+	 * probably due to the switch of VREF. We must keep the lock here to
+	 * avoid races with the buffer enable/disable functions.
+	 */
+	mutex_lock(&adc->lock);
+	cfg = readl(adc->base + JZ_ADC_REG_CFG);
+	writel(cfg & ~JZ_ADC_REG_CFG_CMD_SEL, adc->base + JZ_ADC_REG_CFG);
+
+	ingenic_adc_enable_unlocked(adc, engine, true);
 	ret = readb_poll_timeout(adc->base + JZ_ADC_REG_ENABLE, val,
 				 !(val & BIT(engine)), 250, 1000);
 	if (ret)
-		ingenic_adc_enable(adc, engine, false);
+		ingenic_adc_enable_unlocked(adc, engine, false);
+
+	writel(cfg, adc->base + JZ_ADC_REG_CFG);
+	mutex_unlock(&adc->lock);
 
 	return ret;
 }

drivers/iio/adc/mt6577_auxadc.c

@@ -9,9 +9,9 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/iopoll.h>
 #include <linux/io.h>
 #include <linux/iio/iio.h>
@@ -276,6 +276,8 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
 		goto err_disable_clk;
 	}
 
+	adc_dev->dev_comp = device_get_match_data(&pdev->dev);
+
 	mutex_init(&adc_dev->lock);
 
 	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,

drivers/iio/adc/stm32-adc-core.c

@@ -41,18 +41,16 @@
  * struct stm32_adc_common_regs - stm32 common registers
  * @csr:	common status register offset
  * @ccr:	common control register offset
- * @eoc1_msk:	adc1 end of conversion flag in @csr
- * @eoc2_msk:	adc2 end of conversion flag in @csr
- * @eoc3_msk:	adc3 end of conversion flag in @csr
+ * @eoc_msk:    array of eoc (end of conversion flag) masks in csr for adc1..n
+ * @ovr_msk:    array of ovr (overrun flag) masks in csr for adc1..n
  * @ier:	interrupt enable register offset for each adc
  * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
 struct stm32_adc_common_regs {
 	u32 csr;
 	u32 ccr;
-	u32 eoc1_msk;
-	u32 eoc2_msk;
-	u32 eoc3_msk;
+	u32 eoc_msk[STM32_ADC_MAX_ADCS];
+	u32 ovr_msk[STM32_ADC_MAX_ADCS];
 	u32 ier;
 	u32 eocie_msk;
 };
@@ -282,21 +280,20 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 	.csr = STM32F4_ADC_CSR,
 	.ccr = STM32F4_ADC_CCR,
-	.eoc1_msk = STM32F4_EOC1 | STM32F4_OVR1,
-	.eoc2_msk = STM32F4_EOC2 | STM32F4_OVR2,
-	.eoc3_msk = STM32F4_EOC3 | STM32F4_OVR3,
+	.eoc_msk = { STM32F4_EOC1, STM32F4_EOC2, STM32F4_EOC3},
+	.ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3},
 	.ier = STM32F4_ADC_CR1,
-	.eocie_msk = STM32F4_EOCIE | STM32F4_OVRIE,
+	.eocie_msk = STM32F4_EOCIE,
 };
 
 /* STM32H7 common registers definitions */
 static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
 	.csr = STM32H7_ADC_CSR,
 	.ccr = STM32H7_ADC_CCR,
-	.eoc1_msk = STM32H7_EOC_MST | STM32H7_OVR_MST,
-	.eoc2_msk = STM32H7_EOC_SLV | STM32H7_OVR_SLV,
+	.eoc_msk = { STM32H7_EOC_MST, STM32H7_EOC_SLV},
+	.ovr_msk = { STM32H7_OVR_MST, STM32H7_OVR_SLV},
 	.ier = STM32H7_ADC_IER,
-	.eocie_msk = STM32H7_EOCIE | STM32H7_OVRIE,
+	.eocie_msk = STM32H7_EOCIE,
 };
 
 static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
@@ -318,6 +315,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 {
 	struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int i;
 	u32 status;
 
 	chained_irq_enter(chip, desc);
@@ -335,17 +333,12 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	 * before invoking the interrupt handler (e.g. call ISR only for
 	 * IRQ-enabled ADCs).
 	 */
-	if (status & priv->cfg->regs->eoc1_msk &&
-	    stm32_adc_eoc_enabled(priv, 0))
-		generic_handle_irq(irq_find_mapping(priv->domain, 0));
-
-	if (status & priv->cfg->regs->eoc2_msk &&
-	    stm32_adc_eoc_enabled(priv, 1))
-		generic_handle_irq(irq_find_mapping(priv->domain, 1));
-
-	if (status & priv->cfg->regs->eoc3_msk &&
-	    stm32_adc_eoc_enabled(priv, 2))
-		generic_handle_irq(irq_find_mapping(priv->domain, 2));
+	for (i = 0; i < priv->cfg->num_irqs; i++) {
+		if ((status & priv->cfg->regs->eoc_msk[i] &&
+		     stm32_adc_eoc_enabled(priv, i)) ||
+		     (status & priv->cfg->regs->ovr_msk[i]))
+			generic_handle_irq(irq_find_mapping(priv->domain, i));
+	}
 
 	chained_irq_exit(chip, desc);
 };

drivers/iio/adc/stm32-adc.c

@@ -154,6 +154,7 @@ struct stm32_adc;
  * @start_conv:		routine to start conversions
  * @stop_conv:		routine to stop conversions
  * @unprepare:		optional unprepare routine (disable, power-down)
+ * @irq_clear:		routine to clear irqs
  * @smp_cycles:		programmable sampling time (ADC clock cycles)
  */
 struct stm32_adc_cfg {
@@ -166,6 +167,7 @@ struct stm32_adc_cfg {
 	void (*start_conv)(struct iio_dev *, bool dma);
 	void (*stop_conv)(struct iio_dev *);
 	void (*unprepare)(struct iio_dev *);
+	void (*irq_clear)(struct iio_dev *indio_dev, u32 msk);
 	const unsigned int *smp_cycles;
 };
 
@@ -621,6 +623,13 @@ static void stm32f4_adc_stop_conv(struct iio_dev *indio_dev)
 			   STM32F4_ADON | STM32F4_DMA | STM32F4_DDS);
 }
 
+static void stm32f4_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+
+	stm32_adc_clr_bits(adc, adc->cfg->regs->isr_eoc.reg, msk);
+}
+
 static void stm32h7_adc_start_conv(struct iio_dev *indio_dev, bool dma)
 {
 	struct stm32_adc *adc = iio_priv(indio_dev);
@@ -659,6 +668,13 @@ static void stm32h7_adc_stop_conv(struct iio_dev *indio_dev)
 	stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
 }
 
+static void stm32h7_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+	/* On STM32H7 IRQs are cleared by writing 1 into ISR register */
+	stm32_adc_set_bits(adc, adc->cfg->regs->isr_eoc.reg, msk);
+}
+
 static int stm32h7_adc_exit_pwr_down(struct iio_dev *indio_dev)
 {
 	struct stm32_adc *adc = iio_priv(indio_dev);
@@ -1235,17 +1251,40 @@ static int stm32_adc_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
+static void stm32_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+
+	adc->cfg->irq_clear(indio_dev, msk);
+}
+
 static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
 {
 	struct iio_dev *indio_dev = data;
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	const struct stm32_adc_regspec *regs = adc->cfg->regs;
 	u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
+	u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
 
-	if (status & regs->isr_ovr.mask)
+	/* Check ovr status right now, as ovr mask should be already disabled */
+	if (status & regs->isr_ovr.mask) {
+		/*
+		 * Clear ovr bit to avoid subsequent calls to IRQ handler.
+		 * This requires to stop ADC first. OVR bit state in ISR,
+		 * is propaged to CSR register by hardware.
+		 */
+		adc->cfg->stop_conv(indio_dev);
+		stm32_adc_irq_clear(indio_dev, regs->isr_ovr.mask);
 		dev_err(&indio_dev->dev, "Overrun, stopping: restart needed\n");
+		return IRQ_HANDLED;
+	}
 
-	return IRQ_HANDLED;
+	if (!(status & mask))
+		dev_err_ratelimited(&indio_dev->dev,
+				    "Unexpected IRQ: IER=0x%08x, ISR=0x%08x\n",
+				    mask, status);
+
+	return IRQ_NONE;
 }
 
 static irqreturn_t stm32_adc_isr(int irq, void *data)
@@ -1254,6 +1293,10 @@ static irqreturn_t stm32_adc_isr(int irq, void *data)
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	const struct stm32_adc_regspec *regs = adc->cfg->regs;
 	u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
+	u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
+
+	if (!(status & mask))
+		return IRQ_WAKE_THREAD;
 
 	if (status & regs->isr_ovr.mask) {
 		/*
@@ -2046,6 +2089,7 @@ static const struct stm32_adc_cfg stm32f4_adc_cfg = {
 	.start_conv = stm32f4_adc_start_conv,
 	.stop_conv = stm32f4_adc_stop_conv,
 	.smp_cycles = stm32f4_adc_smp_cycles,
+	.irq_clear = stm32f4_adc_irq_clear,
 };
 
 static const struct stm32_adc_cfg stm32h7_adc_cfg = {
@@ -2057,6 +2101,7 @@ static const struct stm32_adc_cfg stm32h7_adc_cfg = {
 	.prepare = stm32h7_adc_prepare,
 	.unprepare = stm32h7_adc_unprepare,
 	.smp_cycles = stm32h7_adc_smp_cycles,
+	.irq_clear = stm32h7_adc_irq_clear,
 };
 
 static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
@@ -2069,6 +2114,7 @@ static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
 	.prepare = stm32h7_adc_prepare,
 	.unprepare = stm32h7_adc_unprepare,
 	.smp_cycles = stm32h7_adc_smp_cycles,
+	.irq_clear = stm32h7_adc_irq_clear,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {

drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c

@@ -256,7 +256,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
 	struct cros_ec_dev *ec = sensor_hub->ec;
 	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
-	u32 ver_mask;
+	u32 ver_mask, temp;
 	int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
 	int ret, i;
 
@@ -311,10 +311,16 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 						 &frequencies[2],
 						 &state->fifo_max_event_count);
 		} else {
-			frequencies[1] = state->resp->info_3.min_frequency;
-			frequencies[2] = state->resp->info_3.max_frequency;
-			state->fifo_max_event_count =
-			    state->resp->info_3.fifo_max_event_count;
+			if (state->resp->info_3.max_frequency == 0) {
+				get_default_min_max_freq(state->resp->info.type,
+							 &frequencies[1],
+							 &frequencies[2],
+							 &temp);
+			} else {
+				frequencies[1] = state->resp->info_3.min_frequency;
+				frequencies[2] = state->resp->info_3.max_frequency;
+			}
+			state->fifo_max_event_count = state->resp->info_3.fifo_max_event_count;
 		}
 		for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
 			state->frequencies[2 * i] = frequencies[i] / 1000;

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c

@@ -156,11 +156,13 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
 static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
 {
 	struct st_lsm6dsx_sensor *sensor;
-	u32 odr;
+	u32 odr, timeout;
 
 	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
 	odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500;
-	msleep((2000000U / odr) + 1);
+	/* set 10ms as minimum timeout for i2c slave configuration */
+	timeout = max_t(u32, 2000000U / odr + 1, 10);
+	msleep(timeout);
 }
 
 /*

drivers/iio/light/Kconfig

@@ -544,6 +544,7 @@ config VCNL4000
 
 config VCNL4035
 	tristate "VCNL4035 combined ALS and proximity sensor"
+	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select REGMAP_I2C
 	depends on I2C

drivers/staging/mt7621-pci/pci-mt7621.c

@@ -653,16 +653,11 @@ static int mt7621_pcie_init_virtual_bridges(struct mt7621_pcie *pcie)
 	return 0;
 }
 
-static int mt7621_pcie_request_resources(struct mt7621_pcie *pcie,
-					 struct list_head *res)
+static void mt7621_pcie_add_resources(struct mt7621_pcie *pcie,
+				      struct list_head *res)
 {
-	struct device *dev = pcie->dev;
-
 	pci_add_resource_offset(res, &pcie->io, pcie->offset.io);
 	pci_add_resource_offset(res, &pcie->mem, pcie->offset.mem);
-	pci_add_resource(res, &pcie->busn);
-
-	return devm_request_pci_bus_resources(dev, res);
 }
 
 static int mt7621_pcie_register_host(struct pci_host_bridge *host,
@@ -738,11 +733,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 
 	setup_cm_memory_region(pcie);
 
-	err = mt7621_pcie_request_resources(pcie, &res);
-	if (err) {
-		dev_err(dev, "Error requesting resources\n");
-		return err;
-	}
+	mt7621_pcie_add_resources(pcie, &res);
 
 	err = mt7621_pcie_register_host(bridge, &res);
 	if (err) {

drivers/staging/ralink-gdma/Kconfig

@@ -2,6 +2,7 @@
 config DMA_RALINK
 	tristate "RALINK DMA support"
 	depends on RALINK && !SOC_RT288X
+	depends on DMADEVICES
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 

drivers/staging/rtl8723bs/os_dep/sdio_intf.c

@@ -20,6 +20,7 @@ static const struct sdio_device_id sdio_ids[] = {
 	{ SDIO_DEVICE(0x024c, 0x0525), },
 	{ SDIO_DEVICE(0x024c, 0x0623), },
 	{ SDIO_DEVICE(0x024c, 0x0626), },
+	{ SDIO_DEVICE(0x024c, 0x0627), },
 	{ SDIO_DEVICE(0x024c, 0xb723), },
 	{ /* end: all zeroes */				},
 };