提交 d21e5abd 编写于 作者: S Steffen Dirkwinkel 提交者: Hans de Goede

platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with...

platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table

pmc_plt_clk* clocks are used for ethernet controllers, so need to stay
turned on. This adds the affected board family to critclk_systems DMI
table, so the clocks are marked as CLK_CRITICAL and not turned off.

This replaces the previously listed boards with a match for the whole
device family CBxx63. CBxx63 matches only baytrail devices.
There are new affected boards that would otherwise need to be listed.
There are unaffected boards in the family, but having the clocks
turned on is not an issue.

Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NSteffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Link: https://lore.kernel.org/r/20210412133006.397679-1-linux-kernel-dev@beckhoff.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
上级 57293197
......@@ -393,34 +393,10 @@ static const struct dmi_system_id critclk_systems[] = {
},
{
/* pmc_plt_clk* - are used for ethernet controllers */
.ident = "Beckhoff CB3163",
.ident = "Beckhoff Baytrail",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
DMI_MATCH(DMI_BOARD_NAME, "CB3163"),
},
},
{
/* pmc_plt_clk* - are used for ethernet controllers */
.ident = "Beckhoff CB4063",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
DMI_MATCH(DMI_BOARD_NAME, "CB4063"),
},
},
{
/* pmc_plt_clk* - are used for ethernet controllers */
.ident = "Beckhoff CB6263",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
DMI_MATCH(DMI_BOARD_NAME, "CB6263"),
},
},
{
/* pmc_plt_clk* - are used for ethernet controllers */
.ident = "Beckhoff CB6363",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
DMI_MATCH(DMI_BOARD_NAME, "CB6363"),
DMI_MATCH(DMI_PRODUCT_FAMILY, "CBxx63"),
},
},
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册