isci: Converting smp_response to Linux native smp_resp

Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/core/intel_sas.h

@@ -198,184 +198,6 @@ struct sci_ssp_frame_header {
 
 };
 
-/**
- * struct smp_response_header - This structure depicts the contents of the SAS
- *    SMP DISCOVER RESPONSE frame.  For specific information on each of these
- *    individual fields please reference the SAS specification Link layer
- *    section on address frames.
- *
- *
- */
-struct smp_response_header {
-	u8 smp_frame_type;      /* byte 0 */
-	u8 function;            /* byte 1 */
-	u8 function_result;     /* byte 2 */
-	u8 response_length;     /* byte 3 */
-};
-
-
-/**
- * struct smp_response_report_general - This structure depicts the SMP Report
- *    General for expander devices.  It adheres to the SAS-2.1 specification.
- *
- * For specific information on each of these individual fields please reference
- * the SAS specification Application layer section on SMP.
- */
-struct smp_response_report_general {
-	u16 expander_change_count;              /* byte 4-5 */
-	u16 expander_route_indexes;             /* byte 6-7 */
-
-	u32 reserved_byte8:7;                 /* byte 8 bit 0-6 */
-	u32 long_response:1;                  /* byte 8 bit 7 */
-
-	u32 number_of_phys:8;                 /* byte 9 */
-
-	u32 configurable_route_table:1;       /* byte 10 */
-	u32 configuring:1;
-	u32 configures_others:1;
-	u32 open_reject_retry_supported:1;
-	u32 stp_continue_awt:1;
-	u32 self_configuring:1;
-	u32 zone_configuring:1;
-	u32 table_to_table_supported:1;
-
-	u32 reserved_byte11:8;                /* byte 11 */
-
-	u32 enclosure_logical_identifier_high;  /* byte 12-15 */
-	u32 enclosure_logical_identifier_low;   /* byte 16-19 */
-
-	u32 reserved_byte20_23;
-	u32 reserved_byte24_27;
-
-};
-
-struct smp_response_report_general_long {
-	struct smp_response_report_general sas1_1;
-
-	struct {
-		u16 reserved1;
-		u16 stp_bus_inactivity_time_limit;
-		u16 stp_max_connect_time_limit;
-		u16 stp_smp_i_t_nexus_loss_time;
-
-		u32 zoning_enabled:1;
-		u32 zoning_supported:1;
-		u32 physicaL_presence_asserted:1;
-		u32 zone_locked:1;
-		u32 reserved2:1;
-		u32 num_zone_groups:3;
-		u32 saving_zoning_enabled_supported:3;
-		u32 saving_zone_perms_table_supported:1;
-		u32 saving_zone_phy_info_supported:1;
-		u32 saving_zone_manager_password_supported:1;
-		u32 saving:1;
-		u32 reserved3:1;
-		u32 max_number_routed_sas_addresses:16;
-
-		struct sci_sas_address active_zone_manager_sas_address;
-
-		u16 zone_lock_inactivity_time_limit;
-		u16 reserved4;
-
-		u8 reserved5;
-		u8 first_enclosure_connector_element_index;
-		u8 number_of_enclosure_connector_element_indices;
-		u8 reserved6;
-
-		u32 reserved7:7;
-		u32 reduced_functionality:1;
-		u32 time_to_reduce_functionality:8;
-		u32 initial_time_to_reduce_functionality:8;
-		u8 max_reduced_functionality_time;
-
-		u16 last_self_config_status_descriptor_index;
-		u16 max_number_of_stored_self_config_status_descriptors;
-
-		u16 last_phy_event_list_descriptor_index;
-		u16 max_number_of_stored_phy_event_list_descriptors;
-	} sas2;
-
-};
-
-/**
- * struct smp_response_report_manufacturer_information - This structure depicts
- *    the SMP report manufacturer information for expander devices.  It adheres
- *    to the SAS-2.1 specification.
- *
- * For specific information on each of these individual fields please reference
- * the SAS specification Application layer section on SMP.
- */
-struct smp_response_report_manufacturer_information {
-	u32 expander_change_count:16; /* bytes 4-5 */
-	u32 reserved1:16;
-
-	u32 sas1_1_format:1;
-	u32 reserved2:31;
-
-	u8 vendor_id[8];
-	u8 product_id[16];
-	u8 product_revision_level[4];
-	u8 component_vendor_id[8];
-	u8 component_id[2];
-	u8 component_revision_level;
-	u8 reserved3;
-	u8 vendor_specific[8];
-
-};
-
-/**
- * struct smp_response_report_phy_sata - This structure depicts the contents of
- *    the SAS SMP REPORT PHY SATA frame.  For specific information on each of
- *    these individual fields please reference the SAS specification Link layer
- *    section on address frames.
- *
- *
- */
-struct smp_response_report_phy_sata {
-	u32 ignored_byte_4_7; /* bytes 4-7 */
-
-	u32 affiliations_valid:1;
-	u32 affiliations_supported:1;
-	u32 reserved_byte11:6;        /* byte 11 */
-	u32 ignored_byte10:8;         /* byte 10 */
-	u32 phy_identifier:8;         /* byte  9 */
-	u32 reserved_byte_8:8;        /* byte  8 */
-
-	u32 reserved_12_15;
-	u32 stp_sas_address[2];
-	u8 device_to_host_fis[20];
-	u32 reserved_44_47;
-	u32 affiliated_stp_initiator_sas_address[2];
-
-};
-
-#define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016
-struct smp_response_vendor_specific {
-	u8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH];
-};
-
-union smp_response_body {
-	struct smp_response_report_general report_general;
-	struct smp_response_report_manufacturer_information report_manufacturer_information;
-	struct smp_response_report_phy_sata report_phy_sata;
-	struct smp_response_vendor_specific vendor_specific_response;
-};
-
-/**
- * struct smp_response - This structure simply unionizes the existing response
- *    structures into a common response type.
- *
- *
- */
-struct smp_response {
-	struct smp_response_header header;
-
-	union smp_response_body response;
-
-};
-
-#define SMP_FRAME_TYPE_REQUEST          0x40
-#define SMP_FRAME_TYPE_RESPONSE         0x41
 
 #define PHY_OPERATION_NOP               0x00
 #define PHY_OPERATION_LINK_RESET        0x01

drivers/scsi/isci/core/scic_sds_smp_request.c

@@ -53,6 +53,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <scsi/sas.h>
 #include "sas.h"
 #include "intel_sas.h"
 #include "sci_base_state_machine.h"
@@ -79,7 +80,7 @@ u32 scic_sds_smp_request_get_object_size(void)
 {
 	return sizeof(struct scic_sds_request)
 	       + sizeof(struct smp_req)
-	       + sizeof(struct smp_response)
+	       + sizeof(struct smp_resp)
 	       + sizeof(struct scu_task_context)
 	       + SMP_CACHE_BYTES;
 }
@@ -111,7 +112,7 @@ u32 scic_sds_smp_request_get_object_size(void)
 #define scic_sds_smp_request_get_task_context_buffer(memory) \
 	((struct scu_task_context *)(\
 		 ((char *)(scic_sds_smp_request_get_response_buffer(memory))) \
-		 + sizeof(struct smp_response) \
+		 + sizeof(struct smp_resp) \
 		 ))
 
 
@@ -271,8 +272,8 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
 	task_context->response_iu_lower = 0;
 }
 
-/**
- * This method processes an unsolicited frame while the SMP request is waiting
+/*
+ * This function processes an unsolicited frame while the SMP request is waiting
  *    for a response frame.  It will copy the response data, release the
  *    unsolicited frame, and transition the request to the
  *    SCI_BASE_REQUEST_STATE_COMPLETED state.
@@ -281,63 +282,52 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
  * @frame_index: This parameter indicates the unsolicited frame index that
  *    should contain the response.
  *
- * This method returns an indication of whether the response frame was handled
+ * This function returns an indication of whether the response frame was handled
  * successfully or not. SCI_SUCCESS Currently this value is always returned and
  * indicates successful processing of the TC response.
  */
-static enum sci_status scic_sds_smp_request_await_response_frame_handler(
-	struct scic_sds_request *sci_req,
-	u32 frame_index)
+static enum sci_status
+scic_sds_smp_request_await_response_frame_handler(
+		struct scic_sds_request *sci_req,
+		u32 frame_index)
 {
 	enum sci_status status;
 	void *frame_header;
-	struct smp_response_header *rsp_hdr;
-	u8 *user_smp_buffer = sci_req->response_buffer;
+	struct smp_resp *rsp_hdr;
+	u8 *usr_smp_buf = sci_req->response_buffer;
 
 	status = scic_sds_unsolicited_frame_control_get_header(
 		&(scic_sds_request_get_controller(sci_req)->uf_control),
 		frame_index,
-		&frame_header
-		);
+		&frame_header);
 
 	/* byte swap the header. */
-	scic_word_copy_with_swap(
-		(u32 *)user_smp_buffer,
-		frame_header,
-		sizeof(struct smp_response_header) / sizeof(u32)
-		);
-	rsp_hdr = (struct smp_response_header *)user_smp_buffer;
+	scic_word_copy_with_swap((u32 *)usr_smp_buf,
+				 frame_header,
+				 SMP_RESP_HDR_SZ / sizeof(u32));
 
-	if (rsp_hdr->smp_frame_type == SMP_FRAME_TYPE_RESPONSE) {
-		void *smp_response_buffer;
+	rsp_hdr = (struct smp_resp *)usr_smp_buf;
+
+	if (rsp_hdr->frame_type == SMP_RESPONSE) {
+		void *smp_resp;
 
 		status = scic_sds_unsolicited_frame_control_get_buffer(
 			&(scic_sds_request_get_controller(sci_req)->uf_control),
 			frame_index,
-			&smp_response_buffer
-			);
+			&smp_resp);
 
 		scic_word_copy_with_swap(
-			(u32 *)(user_smp_buffer + sizeof(struct smp_response_header)),
-			smp_response_buffer,
-			sizeof(union smp_response_body) / sizeof(u32)
-			);
-		/*
-		 * Don't need to copy to user space. User instead will refer to
-		 * core request's response buffer. */
-
-		/*
-		 * copy the smp response to framework smp request's response buffer.
-		 * scic_sds_smp_request_copy_response(sci_req); */
+			(u32 *)(usr_smp_buf + SMP_RESP_HDR_SZ),
+			smp_resp,
+			(sizeof(struct smp_req) - SMP_RESP_HDR_SZ) /
+			sizeof(u32));
 
 		scic_sds_request_set_status(
-			sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS
-			);
+			sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS);
 
 		sci_base_state_machine_change_state(
 			&sci_req->started_substate_machine,
-			SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION
-			);
+			SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION);
 	} else {
 		/* This was not a response frame why did it get forwarded? */
 		dev_err(scic_to_dev(sci_req->owning_controller),
@@ -346,23 +336,20 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler(
 			__func__,
 			sci_req,
 			frame_index,
-			rsp_hdr->smp_frame_type);
+			rsp_hdr->frame_type);
 
 		scic_sds_request_set_status(
 			sci_req,
 			SCU_TASK_DONE_SMP_FRM_TYPE_ERR,
-			SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
-			);
+			SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
 
 		sci_base_state_machine_change_state(
 			&sci_req->state_machine,
-			SCI_BASE_REQUEST_STATE_COMPLETED
-			);
+			SCI_BASE_REQUEST_STATE_COMPLETED);
 	}
 
-	scic_sds_controller_release_frame(
-		sci_req->owning_controller, frame_index
-		);
+	scic_sds_controller_release_frame(sci_req->owning_controller,
+					  frame_index);
 
 	return SCI_SUCCESS;
 }

drivers/scsi/isci/sas.h

@@ -213,4 +213,6 @@ struct smp_req {
 	};
 }  __packed;
 
+#define SMP_RESP_HDR_SZ	4
+
 #endif