firmware: arm_scmi: Remove all the unused local variables

While using SCMI iterators helpers a few local automatic variables are
defined but then used only as input for sizeof operators.

cppcheck is fooled to complain about this with:

 | drivers/firmware/arm_scmi/sensors.c:341:48: warning: Variable 'msg' is
 |				not assigned a value. [unassignedVariable]
 |	 struct scmi_msg_sensor_list_update_intervals *msg;

Even though this is an innocuos warning, since the uninitialized variable
is at the end never used in the reported cases, fix these occurences all
over SCMI stack to avoid keeping unneeded objects on the stack.

Link: https://lore.kernel.org/r/20220530115237.277077-1-cristian.marussi@arm.com
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NCristian Marussi <cristian.marussi@arm.com>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>

drivers/firmware/arm_scmi/clock.c

@@ -266,9 +266,7 @@ scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id,
 			      struct scmi_clock_info *clk)
 {
 	int ret;
-
 	void *iter;
-	struct scmi_msg_clock_describe_rates *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_clk_describe_prepare_message,
 		.update_state = iter_clk_describe_update_state,
@@ -281,7 +279,8 @@ scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id,
 
 	iter = ph->hops->iter_response_init(ph, &ops, SCMI_MAX_NUM_RATES,
 					    CLOCK_DESCRIBE_RATES,
-					    sizeof(*msg), &cpriv);
+					    sizeof(struct scmi_msg_clock_describe_rates),
+					    &cpriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 

drivers/firmware/arm_scmi/perf.c

@@ -332,7 +332,6 @@ scmi_perf_describe_levels_get(const struct scmi_protocol_handle *ph, u32 domain,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_perf_describe_levels *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_perf_levels_prepare_message,
 		.update_state = iter_perf_levels_update_state,
@@ -345,7 +344,8 @@ scmi_perf_describe_levels_get(const struct scmi_protocol_handle *ph, u32 domain,
 
 	iter = ph->hops->iter_response_init(ph, &ops, MAX_OPPS,
 					    PERF_DESCRIBE_LEVELS,
-					    sizeof(*msg), &ppriv);
+					    sizeof(struct scmi_msg_perf_describe_levels),
+					    &ppriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 

drivers/firmware/arm_scmi/sensors.c

@@ -338,7 +338,6 @@ static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,
 					struct scmi_sensor_info *s)
 {
 	void *iter;
-	struct scmi_msg_sensor_list_update_intervals *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_intervals_prepare_message,
 		.update_state = iter_intervals_update_state,
@@ -351,7 +350,8 @@ static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,
 
 	iter = ph->hops->iter_response_init(ph, &ops, s->intervals.count,
 					    SENSOR_LIST_UPDATE_INTERVALS,
-					    sizeof(*msg), &upriv);
+					    sizeof(struct scmi_msg_sensor_list_update_intervals),
+					    &upriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
@@ -459,7 +459,6 @@ scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph,
 				    struct scmi_sensor_info *s)
 {
 	void *iter;
-	struct scmi_msg_sensor_axis_description_get *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_axes_desc_prepare_message,
 		.update_state = iter_axes_extended_name_update_state,
@@ -468,7 +467,8 @@ scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph,
 
 	iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
 					    SENSOR_AXIS_NAME_GET,
-					    sizeof(*msg), s);
+					    sizeof(struct scmi_msg_sensor_axis_description_get),
+					    s);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 
@@ -481,7 +481,6 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_sensor_axis_description_get *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_axes_desc_prepare_message,
 		.update_state = iter_axes_desc_update_state,
@@ -495,7 +494,8 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
 
 	iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
 					    SENSOR_AXIS_DESCRIPTION_GET,
-					    sizeof(*msg), s);
+					    sizeof(struct scmi_msg_sensor_axis_description_get),
+					    s);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);
 

drivers/firmware/arm_scmi/voltage.c

@@ -180,7 +180,6 @@ static int scmi_voltage_levels_get(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_cmd_describe_levels *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_volt_levels_prepare_message,
 		.update_state = iter_volt_levels_update_state,
@@ -193,7 +192,8 @@ static int scmi_voltage_levels_get(const struct scmi_protocol_handle *ph,
 
 	iter = ph->hops->iter_response_init(ph, &ops, v->num_levels,
 					    VOLTAGE_DESCRIBE_LEVELS,
-					    sizeof(*msg), &vpriv);
+					    sizeof(struct scmi_msg_cmd_describe_levels),
+					    &vpriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);