Merge branch 'fixes' into next

drivers/mmc/host/sdhci-of-esdhc.c

@@ -1301,8 +1301,8 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
 
 	if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) {
-		host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
-		host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+		host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 	}
 
 	if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||

drivers/mmc/host/sdhci-pci-core.c

@@ -27,6 +27,7 @@
 #include <linux/mmc/slot-gpio.h>
 #include <linux/mmc/sdhci-pci-data.h>
 #include <linux/acpi.h>
+#include <linux/dmi.h>
 
 #ifdef CONFIG_X86
 #include <asm/iosf_mbi.h>
@@ -783,11 +784,18 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
 	return 0;
 }
 
+static bool glk_broken_cqhci(struct sdhci_pci_slot *slot)
+{
+	return slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_GLK_EMMC &&
+	       dmi_match(DMI_BIOS_VENDOR, "LENOVO");
+}
+
 static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
 {
 	int ret = byt_emmc_probe_slot(slot);
 
-	slot->host->mmc->caps2 |= MMC_CAP2_CQE;
+	if (!glk_broken_cqhci(slot))
+		slot->host->mmc->caps2 |= MMC_CAP2_CQE;
 
 	if (slot->chip->pdev->device != PCI_DEVICE_ID_INTEL_GLK_EMMC) {
 		slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES,

drivers/mmc/host/sdhci.c

@@ -3756,6 +3756,9 @@ int sdhci_setup_host(struct sdhci_host *host)
 		       mmc_hostname(mmc), host->version);
 	}
 
+	if (host->quirks & SDHCI_QUIRK_BROKEN_CQE)
+		mmc->caps2 &= ~MMC_CAP2_CQE;
+
 	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
 		host->flags |= SDHCI_USE_SDMA;
 	else if (!(host->caps & SDHCI_CAN_DO_SDMA))

drivers/mmc/host/sdhci.h

@@ -409,6 +409,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
 /* Controller reports inverted write-protect state */
 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
+/* Controller has unusable command queue engine */
+#define SDHCI_QUIRK_BROKEN_CQE				(1<<17)
 /* Controller does not like fast PIO transfers */
 #define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
 /* Controller does not have a LED */