提交 d03d0a57 编写于 作者: R Ralf Baechle

MT bulletproofing.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 533330bf
......@@ -33,6 +33,7 @@
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/system.h>
static int mips_cpu_irq_base;
......@@ -76,7 +77,7 @@ static unsigned int mips_cpu_irq_startup(unsigned int irq)
return 0;
}
#define mips_cpu_irq_shutdown mips_cpu_irq_disable
#define mips_cpu_irq_shutdown mips_cpu_irq_disable
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
......@@ -84,9 +85,6 @@ static unsigned int mips_cpu_irq_startup(unsigned int irq)
*/
static void mips_cpu_irq_ack(unsigned int irq)
{
/* Only necessary for soft interrupts */
clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
mask_mips_irq(irq);
}
......@@ -97,15 +95,60 @@ static void mips_cpu_irq_end(unsigned int irq)
}
static hw_irq_controller mips_cpu_irq_controller = {
.typename = "MIPS",
.startup = mips_cpu_irq_startup,
.shutdown = mips_cpu_irq_shutdown,
.enable = mips_cpu_irq_enable,
.disable = mips_cpu_irq_disable,
.ack = mips_cpu_irq_ack,
.end = mips_cpu_irq_end,
.typename = "MIPS",
.startup = mips_cpu_irq_startup,
.shutdown = mips_cpu_irq_shutdown,
.enable = mips_cpu_irq_enable,
.disable = mips_cpu_irq_disable,
.ack = mips_cpu_irq_ack,
.end = mips_cpu_irq_end,
};
/*
* Basically the same as above but taking care of all the MT stuff
*/
#define unmask_mips_mt_irq unmask_mips_irq
#define mask_mips_mt_irq mask_mips_irq
#define mips_mt_cpu_irq_enable mips_cpu_irq_enable
#define mips_mt_cpu_irq_disable mips_cpu_irq_disable
static unsigned int mips_mt_cpu_irq_startup(unsigned int irq)
{
unsigned int vpflags = dvpe();
clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
evpe(vpflags);
mips_mt_cpu_irq_enable(irq);
return 0;
}
#define mips_mt_cpu_irq_shutdown mips_mt_cpu_irq_disable
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
* to deal with concurrency issues. Same for mips_cpu_irq_end.
*/
static void mips_mt_cpu_irq_ack(unsigned int irq)
{
unsigned int vpflags = dvpe();
clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
evpe(vpflags);
mask_mips_mt_irq(irq);
}
#define mips_mt_cpu_irq_end mips_cpu_irq_end
static hw_irq_controller mips_mt_cpu_irq_controller = {
.typename = "MIPS",
.startup = mips_mt_cpu_irq_startup,
.shutdown = mips_mt_cpu_irq_shutdown,
.enable = mips_mt_cpu_irq_enable,
.disable = mips_mt_cpu_irq_disable,
.ack = mips_mt_cpu_irq_ack,
.end = mips_mt_cpu_irq_end,
};
void __init mips_cpu_irq_init(int irq_base)
{
......@@ -115,7 +158,19 @@ void __init mips_cpu_irq_init(int irq_base)
clear_c0_status(ST0_IM);
clear_c0_cause(CAUSEF_IP);
for (i = irq_base; i < irq_base + 8; i++) {
/*
* Only MT is using the software interrupts currently, so we just
* leave them uninitialized for other processors.
*/
if (cpu_has_mipsmt)
for (i = irq_base; i < irq_base + 2; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].handler = &mips_mt_cpu_irq_controller;
}
for (i = irq_base + 2; i < irq_base + 8; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
......
......@@ -1186,8 +1186,14 @@ void __init per_cpu_trap_init(void)
/* Setting vector spacing enables EI/VI mode */
change_c0_intctl (0x3e0, VECTORSPACING);
}
if (cpu_has_divec)
set_c0_cause(CAUSEF_IV);
if (cpu_has_divec) {
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
set_c0_cause(CAUSEF_IV);
evpe(vpflags);
} else
set_c0_cause(CAUSEF_IV);
}
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
TLBMISS_HANDLER_SETUP();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册