gpio:keep the original function for non-RPi

raspberrypi inclusion
category: feature
bugzilla: 50432

------------------------------

This patch adjusts following gpio related patches for
raspberry pi on non-Raspberry Pi platforms, using specific
config CONFIG_OPENEULER_RASPBERRYPI to distinguish them:

680d5826 Revert "mailbox: avoid timer start from callback"
1088c5d4 gpiolib: Don't prevent IRQ usage of output GPIOs
54bc28b4 gpio-poweroff: Allow it to work on Raspberry Pi
26b77aae i2c-gpio: Also set bus numbers from reg property
Signed-off-by: NFang Yafen <yafen@iscas.ac.cn>
Reviewed-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

drivers/gpio/gpiolib.c

@@ -51,8 +51,6 @@
 #define	extra_checks	0
 #endif
 
-#define dont_test_bit(b,d) (0)
-
 /* Device and char device-related information */
 static DEFINE_IDA(gpio_ida);
 static dev_t gpio_devt;
@@ -2439,13 +2437,15 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 		value = !!value;
 
 	/* GPIOs used for enabled IRQs shall not be set as output */
-	if (dont_test_bit(FLAG_USED_AS_IRQ, &desc->flags) &&
-	    dont_test_bit(FLAG_IRQ_IS_ENABLED, &desc->flags)) {
+#ifndef CONFIG_OPENEULER_RASPBERRYPI
+	if (test_bit(FLAG_USED_AS_IRQ, &desc->flags) &&
+	    test_bit(FLAG_IRQ_IS_ENABLED, &desc->flags)) {
 		gpiod_err(desc,
 			  "%s: tried to set a GPIO tied to an IRQ as output\n",
 			  __func__);
 		return -EIO;
 	}
+#endif
 
 	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
 		/* First see if we can enable open drain in hardware */
@@ -3245,13 +3245,15 @@ int gpiochip_lock_as_irq(struct gpio_chip *gc, unsigned int offset)
 	}
 
 	/* To be valid for IRQ the line needs to be input or open drain */
-	if (dont_test_bit(FLAG_IS_OUT, &desc->flags) &&
-	    !dont_test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
+#ifndef CONFIG_OPENEULER_RASPBERRYPI
+	if (test_bit(FLAG_IS_OUT, &desc->flags) &&
+	    !test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
 		chip_err(gc,
 			 "%s: tried to flag a GPIO set as output for IRQ\n",
 			 __func__);
 		return -EIO;
 	}
+#endif
 
 	set_bit(FLAG_USED_AS_IRQ, &desc->flags);
 	set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);

drivers/i2c/busses/i2c-gpio.c

@@ -445,9 +445,13 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 	adap->dev.parent = dev;
 	adap->dev.of_node = np;
 
+#ifdef CONFIG_OPENEULER_RASPBERRYPI
 	if (pdev->id != PLATFORM_DEVID_NONE || !pdev->dev.of_node ||
 	    of_property_read_u32(pdev->dev.of_node, "reg", &adap->nr))
 		adap->nr = pdev->id;
+#else
+	adap->nr = pdev->id;
+#endif
 	ret = i2c_bit_add_numbered_bus(adap);
 	if (ret)
 		return ret;

drivers/mailbox/mailbox.c

@@ -82,9 +82,16 @@ static void msg_submit(struct mbox_chan *chan)
 exit:
 	spin_unlock_irqrestore(&chan->lock, flags);
 
-	if (!err && (chan->txdone_method & TXDONE_BY_POLL))
-		/* kick start the timer immediately to avoid delays */
+	/* kick start the timer immediately to avoid delays */
+	if (!err && (chan->txdone_method & TXDONE_BY_POLL)) {
+#ifdef CONFIG_OPENEULER_RASPBERRYPI
 		hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+#else
+		/* but only if not already active */
+		if (!hrtimer_active(&chan->mbox->poll_hrt))
+			hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+#endif
+	}
 }
 
 static void tx_tick(struct mbox_chan *chan, int r)
@@ -122,6 +129,9 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
 		struct mbox_chan *chan = &mbox->chans[i];
 
 		if (chan->active_req && chan->cl) {
+#ifndef CONFIG_OPENEULER_RASPBERRYPI
+			resched = true;
+#endif
 			txdone = chan->mbox->ops->last_tx_done(chan);
 			if (txdone)
 				tx_tick(chan, 0);

drivers/power/reset/gpio-poweroff.c

@@ -54,7 +54,9 @@ static int gpio_poweroff_probe(struct platform_device *pdev)
 	bool export = false;
 
 	/* If a pm_power_off function has already been added, leave it alone */
+#ifdef CONFIG_OPENEULER_RASPBERRYPI
 	force = of_property_read_bool(pdev->dev.of_node, "force");
+#endif
 	if (!force && (pm_power_off != NULL)) {
 		dev_err(&pdev->dev,
 			"%s: pm_power_off function already registered\n",