Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 cf07cb1f 编写于 作者: C Christoph Hellwig 提交者： Tony Luck
浏览文件
操作

ia64: remove support for the SGI SN2 platform 

The SGI SN2 (early Altix) is a very non-standard IA64 platform that was
at the very high end of even IA64 hardware, and has been discontinued
a long time ago.  Remove it because there no upstream users left, and it
has magic hooks all over the kernel.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-16-hch@lst.deSigned-off-by: NTony Luck <tony.luck@intel.com>
上级 f7bc6e42
展开全部 隐藏空白更改
内联 并排
Showing with 14 addition and 20657 deletion
arch/ia64/Kconfig
浏览文件 @ cf07cb1f
......@@ -66,7 +66,6 @@ config 64BIT
config ZONE_DMA32
def_bool y
depends on !IA64_SGI_SN2
config QUICKLIST
bool
......@@ -140,7 +139,6 @@ config IA64_GENERIC
DIG+Intel+IOMMU For DIG systems with Intel IOMMU
HP-zx1/sx1000 For HP systems
HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
SGI-SN2 For SGI Altix systems
SGI-UV For SGI UV systems
Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
......@@ -171,17 +169,6 @@ config IA64_HP_ZX1_SWIOTLB
I/O TLB, which allows supporting the broken devices at the expense of
wasting some kernel memory (about 2MB by default).
config IA64_SGI_SN2
bool "SGI-SN2"
select NUMA
select ACPI_NUMA
help
Selecting this option will optimize the kernel for use on sn2 based
systems, but the resulting kernel binary will not run on other
types of ia64 systems. If you have an SGI Altix system, it's safe
to select this option. If in doubt, select ia64 generic support
instead.
config IA64_SGI_UV
bool "SGI-UV"
select NUMA
......@@ -381,13 +368,12 @@ config ARCH_SPARSEMEM_ENABLE
select SPARSEMEM_VMEMMAP_ENABLE
config ARCH_DISCONTIGMEM_DEFAULT
def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
def_bool y if (IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
depends on ARCH_DISCONTIGMEM_ENABLE
config NUMA
bool "NUMA support"
depends on !IA64_HP_SIM && !FLATMEM
default y if IA64_SGI_SN2
select ACPI_NUMA if ACPI
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
......@@ -472,9 +458,6 @@ config IA64_MC_ERR_INJECT
If you're unsure, do not select this option.
config SGI_SN
def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
config IA64_ESI
bool "ESI (Extensible SAL Interface) support"
help
......
arch/ia64/Kconfig.debug
浏览文件 @ cf07cb1f
......@@ -14,7 +14,7 @@ config IA64_GRANULE_16MB
config IA64_GRANULE_64MB
bool "64MB"
depends on !(IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_SGI_SN2)
depends on !(IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
endchoice
......
arch/ia64/Makefile
浏览文件 @ cf07cb1f
......@@ -49,14 +49,13 @@ core-$(CONFIG_IA64_DIG_VTD) += arch/ia64/dig/
core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/
core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/
drivers-$(CONFIG_PCI) += arch/ia64/pci/
drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/
drivers-$(CONFIG_IA64_HP_ZX1) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/ arch/ia64/uv/
drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/uv/
drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
boot := arch/ia64/hp/sim/boot
......
arch/ia64/include/asm/acpi.h
浏览文件 @ cf07cb1f
......@@ -43,8 +43,6 @@ static inline const char *acpi_get_sysname (void)
return "hpzx1";
# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
return "hpzx1_swiotlb";
# elif defined (CONFIG_IA64_SGI_SN2)
return "sn2";
# elif defined (CONFIG_IA64_SGI_UV)
return "uv";
# elif defined (CONFIG_IA64_DIG)
......
arch/ia64/include/asm/irq.h
浏览文件 @ cf07cb1f
......@@ -28,9 +28,6 @@ irq_canonicalize (int irq)
}
extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
bool is_affinity_mask_valid(const struct cpumask *cpumask);
#define is_affinity_mask_valid is_affinity_mask_valid
int create_irq(void);
void destroy_irq(unsigned int irq);
......
arch/ia64/include/asm/machvec.h
浏览文件 @ cf07cb1f
......@@ -101,8 +101,6 @@ extern void machvec_timer_interrupt (int, void *);
# include <asm/machvec_hpzx1.h>
# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
# include <asm/machvec_hpzx1_swiotlb.h>
# elif defined (CONFIG_IA64_SGI_SN2)
# include <asm/machvec_sn2.h>
# elif defined (CONFIG_IA64_SGI_UV)
# include <asm/machvec_uv.h>
# elif defined (CONFIG_IA64_GENERIC)
......
arch/ia64/include/asm/machvec_sn2.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* Copyright (c) 2002-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* Further, this software is distributed without any warranty that it is
* free of the rightful claim of any third person regarding infringement
* or the like. Any license provided herein, whether implied or
* otherwise, applies only to this software file. Patent licenses, if
* any, provided herein do not apply to combinations of this program with
* other software, or any other product whatsoever.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* For further information regarding this notice, see:
*
* http://oss.sgi.com/projects/GenInfo/NoticeExplan
*/
#ifndef _ASM_IA64_MACHVEC_SN2_H
#define _ASM_IA64_MACHVEC_SN2_H
extern ia64_mv_setup_t sn_setup;
extern ia64_mv_cpu_init_t sn_cpu_init;
extern ia64_mv_irq_init_t sn_irq_init;
extern ia64_mv_send_ipi_t sn2_send_IPI;
extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
extern ia64_mv_irq_to_vector sn_irq_to_vector;
extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
extern ia64_mv_inb_t __sn_inb;
extern ia64_mv_inw_t __sn_inw;
extern ia64_mv_inl_t __sn_inl;
extern ia64_mv_outb_t __sn_outb;
extern ia64_mv_outw_t __sn_outw;
extern ia64_mv_outl_t __sn_outl;
extern ia64_mv_mmiowb_t __sn_mmiowb;
extern ia64_mv_readb_t __sn_readb;
extern ia64_mv_readw_t __sn_readw;
extern ia64_mv_readl_t __sn_readl;
extern ia64_mv_readq_t __sn_readq;
extern ia64_mv_readb_t __sn_readb_relaxed;
extern ia64_mv_readw_t __sn_readw_relaxed;
extern ia64_mv_readl_t __sn_readl_relaxed;
extern ia64_mv_readq_t __sn_readq_relaxed;
extern ia64_mv_dma_init sn_dma_init;
extern ia64_mv_migrate_t sn_migrate;
extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event;
extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq;
extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq;
extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus;
/*
* This stuff has dual use!
*
* For a generic kernel, the macros are used to initialize the
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
#define ia64_platform_name "sn2"
#define platform_setup sn_setup
#define platform_cpu_init sn_cpu_init
#define platform_irq_init sn_irq_init
#define platform_send_ipi sn2_send_IPI
#define platform_timer_interrupt sn_timer_interrupt
#define platform_global_tlb_purge sn2_global_tlb_purge
#define platform_pci_fixup sn_pci_fixup
#define platform_inb __sn_inb
#define platform_inw __sn_inw
#define platform_inl __sn_inl
#define platform_outb __sn_outb
#define platform_outw __sn_outw
#define platform_outl __sn_outl
#define platform_mmiowb __sn_mmiowb
#define platform_readb __sn_readb
#define platform_readw __sn_readw
#define platform_readl __sn_readl
#define platform_readq __sn_readq
#define platform_readb_relaxed __sn_readb_relaxed
#define platform_readw_relaxed __sn_readw_relaxed
#define platform_readl_relaxed __sn_readl_relaxed
#define platform_readq_relaxed __sn_readq_relaxed
#define platform_irq_to_vector sn_irq_to_vector
#define platform_local_vector_to_irq sn_local_vector_to_irq
#define platform_pci_get_legacy_mem sn_pci_get_legacy_mem
#define platform_pci_legacy_read sn_pci_legacy_read
#define platform_pci_legacy_write sn_pci_legacy_write
#define platform_dma_init sn_dma_init
#define platform_migrate sn_migrate
#define platform_kernel_launch_event sn_kernel_launch_event
#ifdef CONFIG_PCI_MSI
#define platform_setup_msi_irq sn_setup_msi_irq
#define platform_teardown_msi_irq sn_teardown_msi_irq
#else
#define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL)
#define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL)
#endif
#define platform_pci_fixup_bus sn_pci_fixup_bus
#include <asm/sn/io.h>
#endif /* _ASM_IA64_MACHVEC_SN2_H */
arch/ia64/include/asm/mmzone.h
浏览文件 @ cf07cb1f
......@@ -30,7 +30,7 @@ static inline int pfn_to_nid(unsigned long pfn)
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
#else /* sn2 is the biggest case, so we use that if !DIG */
#else
# define MAX_PHYSNODE_ID 2048
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
#endif
......
arch/ia64/include/asm/sn/acpi.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_ACPI_H
#define _ASM_IA64_SN_ACPI_H
extern int sn_acpi_rev;
#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101)
#endif /* _ASM_IA64_SN_ACPI_H */
arch/ia64/include/asm/sn/addrs.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_ADDRS_H
#define _ASM_IA64_SN_ADDRS_H
#include <asm/percpu.h>
#include <asm/sn/types.h>
#include <asm/sn/arch.h>
#include <asm/sn/pda.h>
/*
* Memory/SHUB Address Format:
* +-+---------+--+--------------+
* |0| NASID |AS| NodeOffset |
* +-+---------+--+--------------+
*
* NASID: (low NASID bit is 0) Memory and SHUB MMRs
* AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
* 00: Local Resources and MMR space
* Top bit of NodeOffset
* 0: Local resources space
* node id:
* 0: IA64/NT compatibility space
* 2: Local MMR Space
* 4: Local memory, regardless of local node id
* 1: Global MMR space
* 01: GET space.
* 10: AMO space.
* 11: Cacheable memory space.
*
* NodeOffset: byte offset
*
*
* TIO address format:
* +-+----------+--+--------------+
* |0| NASID |AS| Nodeoffset |
* +-+----------+--+--------------+
*
* NASID: (low NASID bit is 1) TIO
* AS: 2-bit Chiplet Identifier
* 00: TIO LB (Indicates TIO MMR access.)
* 01: TIO ICE (indicates coretalk space access.)
*
* NodeOffset: top bit must be set.
*
*
* Note that in both of the above address formats, the low
* NASID bit indicates if the reference is to the SHUB or TIO MMRs.
*/
/*
* Define basic shift & mask constants for manipulating NASIDs and AS values.
*/
#define NASID_BITMASK (sn_hub_info->nasid_bitmask)
#define NASID_SHIFT (sn_hub_info->nasid_shift)
#define AS_SHIFT (sn_hub_info->as_shift)
#define AS_BITMASK 0x3UL
#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT)
#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT)
/*
* AS values. These are the same on both SHUB1 & SHUB2.
*/
#define AS_GET_VAL 1UL
#define AS_AMO_VAL 2UL
#define AS_CAC_VAL 3UL
#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT)
#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT)
#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT)
/*
* Virtual Mode Local & Global MMR space.
*/
#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL
#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL
#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
#define LOCAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET)
#define LOCAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET)
#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL
#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL
#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
#define GLOBAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET)
/*
* Physical mode addresses
*/
#define GLOBAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET)
/*
* Clear region & AS bits.
*/
#define TO_PHYS_MASK (~(RGN_BITS | AS_MASK))
/*
* Misc NASID manipulation.
*/
#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT)
#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a))
#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1))
#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT)
#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a))
#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a))
#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
#define IS_TIO_NASID(n) ((n) & 1)
/* non-II mmr's start at top of big window space (4G) */
#define BWIN_TOP 0x0000000100000000UL
/*
* general address defines
*/
#define CAC_BASE (PAGE_OFFSET | AS_CAC_SPACE)
#define AMO_BASE (__IA64_UNCACHED_OFFSET | AS_AMO_SPACE)
#define AMO_PHYS_BASE (RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE)
#define GET_BASE (PAGE_OFFSET | AS_GET_SPACE)
/*
* Convert Memory addresses between various addressing modes.
*/
#define TO_PHYS(x) (TO_PHYS_MASK & (x))
#define TO_CAC(x) (CAC_BASE | TO_PHYS(x))
#ifdef CONFIG_SGI_SN
#define TO_AMO(x) (AMO_BASE | TO_PHYS(x))
#define TO_GET(x) (GET_BASE | TO_PHYS(x))
#else
#define TO_AMO(x) ({ BUG(); x; })
#define TO_GET(x) ({ BUG(); x; })
#endif
/*
* Covert from processor physical address to II/TIO physical address:
* II - squeeze out the AS bits
* TIO- requires a chiplet id in bits 38-39. For DMA to memory,
* the chiplet id is zero. If we implement TIO-TIO dma, we might need
* to insert a chiplet id into this macro. However, it is our belief
* right now that this chiplet id will be ICE, which is also zero.
*/
#define SH1_TIO_PHYS_TO_DMA(x) \
((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x))
#define SH2_NETWORK_BANK_OFFSET(x) \
((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1))
#define SH2_NETWORK_BANK_SELECT(x) \
((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4))) \
>> (sn_hub_info->nasid_shift - 4)) << 36)
#define SH2_NETWORK_ADDRESS(x) \
(SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x))
#define SH2_TIO_PHYS_TO_DMA(x) \
(((u64)(NASID_GET(x)) << 40) | SH2_NETWORK_ADDRESS(x))
#define PHYS_TO_TIODMA(x) \
(is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x))
#define PHYS_TO_DMA(x) \
((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
/*
* Macros to test for address type.
*/
#define IS_AMO_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE)
#define IS_AMO_PHYS_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE)
/*
* The following definitions pertain to the IO special address
* space. They define the location of the big and little windows
* of any given node.
*/
#define BWIN_SIZE_BITS 29 /* big window size: 512M */
#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */
#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
: RAW_NODE_SWIN_BASE(n, w))
#define TIO_SWIN_BASE(n, w) (TIO_IO_BASE(n) + \
((u64) (w) << TIO_SWIN_SIZE_BITS))
#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n))
#define TIO_IO_BASE(n) (__IA64_UNCACHED_OFFSET | NASID_SPACE(n))
#define BWIN_SIZE (1UL << BWIN_SIZE_BITS)
#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE)
#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
#define BWIN_WIDGET_MASK 0x7
#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
#define SH1_IS_BIG_WINDOW_ADDR(x) ((x) & BWIN_TOP)
#define TIO_BWIN_WINDOW_SELECT_MASK 0x7
#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
#define TIO_HWIN_SHIFT_BITS 33
#define TIO_HWIN(x) (NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS)
/*
* The following definitions pertain to the IO special address
* space. They define the location of the big and little windows
* of any given node.
*/
#define SWIN_SIZE_BITS 24
#define SWIN_WIDGET_MASK 0xF
#define TIO_SWIN_SIZE_BITS 28
#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS)
#define TIO_SWIN_WIDGET_MASK 0x3
/*
* Convert smallwindow address to xtalk address.
*
* 'addr' can be physical or virtual address, but will be converted
* to Xtalk address in the range 0 -> SWINZ_SIZEMASK
*/
#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
/*
* The following macros produce the correct base virtual address for
* the hub registers. The REMOTE_HUB_* macro produce
* the address for the specified hub's registers. The intent is
* that the appropriate PI, MD, NI, or II register would be substituted
* for x.
*
* WARNING:
* When certain Hub chip workaround are defined, it's not sufficient
* to dereference the *_HUB_ADDR() macros. You should instead use
* HUB_L() and HUB_S() if you must deal with pointers to hub registers.
* Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
* They're always safe.
*/
/* Shub1 TIO & MMR addressing macros */
#define SH1_TIO_IOSPACE_ADDR(n,x) \
GLOBAL_MMR_ADDR(n,x)
#define SH1_REMOTE_BWIN_MMR(n,x) \
GLOBAL_MMR_ADDR(n,x)
#define SH1_REMOTE_SWIN_MMR(n,x) \
(NODE_SWIN_BASE(n,1) + 0x800000UL + (x))
#define SH1_REMOTE_MMR(n,x) \
(SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) : \
SH1_REMOTE_SWIN_MMR(n,x))
/* Shub1 TIO & MMR addressing macros */
#define SH2_TIO_IOSPACE_ADDR(n,x) \
((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2)))
#define SH2_REMOTE_MMR(n,x) \
GLOBAL_MMR_ADDR(n,x)
/* TIO & MMR addressing macros that work on both shub1 & shub2 */
#define TIO_IOSPACE_ADDR(n,x) \
((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) : \
SH2_TIO_IOSPACE_ADDR(n,x)))
#define SH_REMOTE_MMR(n,x) \
(is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x))
#define REMOTE_HUB_ADDR(n,x) \
(IS_TIO_NASID(n) ? ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) : \
((volatile u64*)SH_REMOTE_MMR(n,x)))
#define HUB_L(x) (*((volatile typeof(*x) *)x))
#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d))
#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a)))
#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
/*
* Coretalk address breakdown
*/
#define CTALK_NASID_SHFT 40
#define CTALK_NASID_MASK (0x3FFFULL << CTALK_NASID_SHFT)
#define CTALK_CID_SHFT 38
#define CTALK_CID_MASK (0x3ULL << CTALK_CID_SHFT)
#define CTALK_NODE_OFFSET 0x3FFFFFFFFF
#endif /* _ASM_IA64_SN_ADDRS_H */
arch/ia64/include/asm/sn/arch.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* SGI specific setup.
*
* Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
* Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
*/
#ifndef _ASM_IA64_SN_ARCH_H
#define _ASM_IA64_SN_ARCH_H
#include <linux/numa.h>
#include <asm/types.h>
#include <asm/percpu.h>
#include <asm/sn/types.h>
#include <asm/sn/sn_cpuid.h>
/*
* This is the maximum number of NUMALINK nodes that can be part of a single
* SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
* remote partitions are NOT included in this number.
* The number of compact nodes cannot exceed size of a coherency domain.
* The purpose of this define is to specify a node count that includes
* all C/M/TIO nodes in an SSI system.
*
* SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
*
* Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
* to ACPI3.0, this limit will be removed. The notion of "compact nodes"
* should be deleted and TIOs should be included in MAX_NUMNODES.
*/
#define MAX_TIO_NODES MAX_NUMNODES
#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES)
/*
* Maximum number of nodes in all partitions and in all coherency domains.
* This is the total number of nodes accessible in the numalink fabric. It
* includes all C & M bricks, plus all TIOs.
*
* This value is also the value of the maximum number of NASIDs in the numalink
* fabric.
*/
#define MAX_NUMALINK_NODES 16384
/*
* The following defines attributes of the HUB chip. These attributes are
* frequently referenced. They are kept in the per-cpu data areas of each cpu.
* They are kept together in a struct to minimize cache misses.
*/
struct sn_hub_info_s {
u8 shub2;
u8 nasid_shift;
u8 as_shift;
u8 shub_1_1_found;
u16 nasid_bitmask;
};
DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
#define sn_hub_info this_cpu_ptr(&__sn_hub_info)
#define is_shub2() (sn_hub_info->shub2)
#define is_shub1() (sn_hub_info->shub2 == 0)
/*
* Use this macro to test if shub 1.1 wars should be enabled
*/
#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found)
/*
* Compact node ID to nasid mappings kept in the per-cpu data areas of each
* cpu.
*/
DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
#define sn_cnodeid_to_nasid this_cpu_ptr(&__sn_cnodeid_to_nasid[0])
extern u8 sn_partition_id;
extern u8 sn_system_size;
extern u8 sn_sharing_domain_size;
extern u8 sn_region_size;
extern void sn_flush_all_caches(long addr, long bytes);
extern bool sn_cpu_disable_allowed(int cpu);
#endif /* _ASM_IA64_SN_ARCH_H */
arch/ia64/include/asm/sn/bte.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
*/
#ifndef _ASM_IA64_SN_BTE_H
#define _ASM_IA64_SN_BTE_H
#include <linux/timer.h>
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <asm/sn/pda.h>
#include <asm/sn/types.h>
#include <asm/sn/shub_mmr.h>
struct nodepda_s;
#define IBCT_NOTIFY (0x1UL << 4)
#define IBCT_ZFIL_MODE (0x1UL << 0)
/* #define BTE_DEBUG */
/* #define BTE_DEBUG_VERBOSE */
#ifdef BTE_DEBUG
# define BTE_PRINTK(x) printk x /* Terse */
# ifdef BTE_DEBUG_VERBOSE
# define BTE_PRINTKV(x) printk x /* Verbose */
# else
# define BTE_PRINTKV(x)
# endif /* BTE_DEBUG_VERBOSE */
#else
# define BTE_PRINTK(x)
# define BTE_PRINTKV(x)
#endif /* BTE_DEBUG */
/* BTE status register only supports 16 bits for length field */
#define BTE_LEN_BITS (16)
#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
/* Define hardware */
#define BTES_PER_NODE (is_shub2() ? 4 : 2)
#define MAX_BTES_PER_NODE 4
#define BTE2OFF_CTRL 0
#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)
#define BTE_BASE_ADDR(interface) \
(is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \
(interface == 1) ? SH2_BT_ENG_CSR_1 : \
(interface == 2) ? SH2_BT_ENG_CSR_2 : \
SH2_BT_ENG_CSR_3 \
: (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)
#define BTE_SOURCE_ADDR(base) \
(is_shub2() ? base + (BTE2OFF_SRC/8) \
: base + (BTEOFF_SRC/8))
#define BTE_DEST_ADDR(base) \
(is_shub2() ? base + (BTE2OFF_DEST/8) \
: base + (BTEOFF_DEST/8))
#define BTE_CTRL_ADDR(base) \
(is_shub2() ? base + (BTE2OFF_CTRL/8) \
: base + (BTEOFF_CTRL/8))
#define BTE_NOTIF_ADDR(base) \
(is_shub2() ? base + (BTE2OFF_NOTIFY/8) \
: base + (BTEOFF_NOTIFY/8))
/* Define hardware modes */
#define BTE_NOTIFY IBCT_NOTIFY
#define BTE_NORMAL BTE_NOTIFY
#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
/* Use a reserved bit to let the caller specify a wait for any BTE */
#define BTE_WACQUIRE 0x4000
/* Use the BTE on the node with the destination memory */
#define BTE_USE_DEST (BTE_WACQUIRE << 1)
/* Use any available BTE interface on any node for the transfer */
#define BTE_USE_ANY (BTE_USE_DEST << 1)
/* macro to force the IBCT0 value valid */
#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR)
#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1)
#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE)
/*
* Some macros to simplify reading.
* Start with macros to locate the BTE control registers.
*/
#define BTE_LNSTAT_LOAD(_bte) \
HUB_L(_bte->bte_base_addr)
#define BTE_LNSTAT_STORE(_bte, _x) \
HUB_S(_bte->bte_base_addr, (_x))
#define BTE_SRC_STORE(_bte, _x) \
({ \
u64 __addr = ((_x) & ~AS_MASK); \
if (is_shub2()) \
__addr = SH2_TIO_PHYS_TO_DMA(__addr); \
HUB_S(_bte->bte_source_addr, __addr); \
})
#define BTE_DEST_STORE(_bte, _x) \
({ \
u64 __addr = ((_x) & ~AS_MASK); \
if (is_shub2()) \
__addr = SH2_TIO_PHYS_TO_DMA(__addr); \
HUB_S(_bte->bte_destination_addr, __addr); \
})
#define BTE_CTRL_STORE(_bte, _x) \
HUB_S(_bte->bte_control_addr, (_x))
#define BTE_NOTIF_STORE(_bte, _x) \
({ \
u64 __addr = ia64_tpa((_x) & ~AS_MASK); \
if (is_shub2()) \
__addr = SH2_TIO_PHYS_TO_DMA(__addr); \
HUB_S(_bte->bte_notify_addr, __addr); \
})
#define BTE_START_TRANSFER(_bte, _len, _mode) \
is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
: BTE_LNSTAT_STORE(_bte, _len); \
BTE_CTRL_STORE(_bte, _mode)
/* Possible results from bte_copy and bte_unaligned_copy */
/* The following error codes map into the BTE hardware codes
* IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
* an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
* to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
* codes to give the following error codes.
*/
#define BTEFAIL_OFFSET 1
typedef enum {
BTE_SUCCESS, /* 0 is success */
BTEFAIL_DIR, /* Directory error due to IIO access*/
BTEFAIL_POISON, /* poison error on IO access (write to poison page) */
BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */
BTEFAIL_ACCESS, /* access error (protection violation) */
BTEFAIL_PWERR, /* Partial Write Error */
BTEFAIL_PRERR, /* Partial Read Error */
BTEFAIL_TOUT, /* CRB Time out */
BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */
BTEFAIL_NOTAVAIL, /* BTE not available */
} bte_result_t;
#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */
#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */
#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */
#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */
#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */
#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */
#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */
#define BTE_ERR_BITS 0x3FUL
#define BTE_ERR_SHIFT 36
#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT)
#define BTE_ERROR_RETRY(value) \
(is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \
: (value != BTEFAIL_TOUT))
/*
* On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
*/
#define BTE_SHUB2_ERROR(_status) \
((_status & BTE_ERR_MASK) \
? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
: _status)
#define BTE_GET_ERROR_STATUS(_status) \
(BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
#define BTE_VALID_SH2_ERROR(value) \
((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
/*
* Structure defining a bte. An instance of this
* structure is created in the nodepda for each
* bte on that node (as defined by BTES_PER_NODE)
* This structure contains everything necessary
* to work with a BTE.
*/
struct bteinfo_s {
volatile u64 notify ____cacheline_aligned;
u64 *bte_base_addr ____cacheline_aligned;
u64 *bte_source_addr;
u64 *bte_destination_addr;
u64 *bte_control_addr;
u64 *bte_notify_addr;
spinlock_t spinlock;
cnodeid_t bte_cnode; /* cnode */
int bte_error_count; /* Number of errors encountered */
int bte_num; /* 0 --> BTE0, 1 --> BTE1 */
int cleanup_active; /* Interface is locked for cleanup */
volatile bte_result_t bh_error; /* error while processing */
volatile u64 *most_rcnt_na;
struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
};
/*
* Function prototypes (functions defined in bte.c, used elsewhere)
*/
extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
extern void bte_error_handler(struct nodepda_s *);
#define bte_zero(dest, len, mode, notification) \
bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
/*
* The following is the preferred way of calling bte_unaligned_copy
* If the copy is fully cache line aligned, then bte_copy is
* used instead. Since bte_copy is inlined, this saves a call
* stack. NOTE: bte_copy is called synchronously and does block
* until the transfer is complete. In order to get the asynch
* version of bte_copy, you must perform this check yourself.
*/
#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
(((len & (L1_CACHE_BYTES - 1)) || \
(src & (L1_CACHE_BYTES - 1)) || \
(dest & (L1_CACHE_BYTES - 1))) ? \
bte_unaligned_copy(src, dest, len, mode) : \
bte_copy(src, dest, len, mode, NULL))
#endif /* _ASM_IA64_SN_BTE_H */
arch/ia64/include/asm/sn/clksupport.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
*/
/*
* This file contains definitions for accessing a platform supported high resolution
* clock. The clock is monitonically increasing and can be accessed from any node
* in the system. The clock is synchronized across nodes - all nodes see the
* same value.
*
* RTC_COUNTER_ADDR - contains the address of the counter
*
*/
#ifndef _ASM_IA64_SN_CLKSUPPORT_H
#define _ASM_IA64_SN_CLKSUPPORT_H
extern unsigned long sn_rtc_cycles_per_second;
#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC))
#define rtc_time() (*RTC_COUNTER_ADDR)
#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
arch/ia64/include/asm/sn/geo.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_GEO_H
#define _ASM_IA64_SN_GEO_H
/* The geoid_t implementation below is based loosely on the pcfg_t
implementation in sys/SN/promcfg.h. */
/* Type declaractions */
/* Size of a geoid_t structure (must be before decl. of geoid_u) */
#define GEOID_SIZE 8 /* Would 16 be better? The size can
be different on different platforms. */
#define MAX_SLOTS 0xf /* slots per module */
#define MAX_SLABS 0xf /* slabs per slot */
typedef unsigned char geo_type_t;
/* Fields common to all substructures */
typedef struct geo_common_s {
moduleid_t module; /* The module (box) this h/w lives in */
geo_type_t type; /* What type of h/w is named by this geoid_t */
slabid_t slab:4; /* slab (ASIC), 0 .. 15 within slot */
slotid_t slot:4; /* slot (Blade), 0 .. 15 within module */
} geo_common_t;
/* Additional fields for particular types of hardware */
typedef struct geo_node_s {
geo_common_t common; /* No additional fields needed */
} geo_node_t;
typedef struct geo_rtr_s {
geo_common_t common; /* No additional fields needed */
} geo_rtr_t;
typedef struct geo_iocntl_s {
geo_common_t common; /* No additional fields needed */
} geo_iocntl_t;
typedef struct geo_pcicard_s {
geo_iocntl_t common;
char bus; /* Bus/widget number */
char slot; /* PCI slot number */
} geo_pcicard_t;
/* Subcomponents of a node */
typedef struct geo_cpu_s {
geo_node_t node;
char slice; /* Which CPU on the node */
} geo_cpu_t;
typedef struct geo_mem_s {
geo_node_t node;
char membus; /* The memory bus on the node */
char memslot; /* The memory slot on the bus */
} geo_mem_t;
typedef union geoid_u {
geo_common_t common;
geo_node_t node;
geo_iocntl_t iocntl;
geo_pcicard_t pcicard;
geo_rtr_t rtr;
geo_cpu_t cpu;
geo_mem_t mem;
char padsize[GEOID_SIZE];
} geoid_t;
/* Preprocessor macros */
#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad:
module/001c07/slab/5/node/memory/2/slot/4 */
/* Values for geo_type_t */
#define GEO_TYPE_INVALID 0
#define GEO_TYPE_MODULE 1
#define GEO_TYPE_NODE 2
#define GEO_TYPE_RTR 3
#define GEO_TYPE_IOCNTL 4
#define GEO_TYPE_IOCARD 5
#define GEO_TYPE_CPU 6
#define GEO_TYPE_MEM 7
#define GEO_TYPE_MAX (GEO_TYPE_MEM+1)
/* Parameter for hwcfg_format_geoid_compt() */
#define GEO_COMPT_MODULE 1
#define GEO_COMPT_SLAB 2
#define GEO_COMPT_IOBUS 3
#define GEO_COMPT_IOSLOT 4
#define GEO_COMPT_CPU 5
#define GEO_COMPT_MEMBUS 6
#define GEO_COMPT_MEMSLOT 7
#define GEO_INVALID_STR "<invalid>"
#define INVALID_NASID ((nasid_t)-1)
#define INVALID_CNODEID ((cnodeid_t)-1)
#define INVALID_PNODEID ((pnodeid_t)-1)
#define INVALID_SLAB (slabid_t)-1
#define INVALID_SLOT (slotid_t)-1
#define INVALID_MODULE ((moduleid_t)-1)
static inline slabid_t geo_slab(geoid_t g)
{
return (g.common.type == GEO_TYPE_INVALID) ?
INVALID_SLAB : g.common.slab;
}
static inline slotid_t geo_slot(geoid_t g)
{
return (g.common.type == GEO_TYPE_INVALID) ?
INVALID_SLOT : g.common.slot;
}
static inline moduleid_t geo_module(geoid_t g)
{
return (g.common.type == GEO_TYPE_INVALID) ?
INVALID_MODULE : g.common.module;
}
extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
#endif /* _ASM_IA64_SN_GEO_H */
arch/ia64/include/asm/sn/intr.h
浏览文件 @ cf07cb1f
......@@ -9,60 +9,7 @@
#ifndef _ASM_IA64_SN_INTR_H
#define _ASM_IA64_SN_INTR_H
#include <linux/rcupdate.h>
#include <asm/sn/types.h>
#define SGI_UART_VECTOR 0xe9
/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
#define SGI_XPC_ACTIVATE 0x30
#define SGI_II_ERROR 0x31
#define SGI_XBOW_ERROR 0x32
#define SGI_PCIASIC_ERROR 0x33
#define SGI_ACPI_SCI_INT 0x34
#define SGI_TIOCA_ERROR 0x35
#define SGI_TIO_ERROR 0x36
#define SGI_TIOCX_ERROR 0x37
#define SGI_MMTIMER_VECTOR 0x38
#define SGI_XPC_NOTIFY 0xe7
#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c
#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6
#define SN2_IRQ_RESERVED 0x1
#define SN2_IRQ_CONNECTED 0x2
#define SN2_IRQ_SHARED 0x4
// The SN PROM irq struct
struct sn_irq_info {
struct sn_irq_info *irq_next; /* deprecated DO NOT USE */
short irq_nasid; /* Nasid IRQ is assigned to */
int irq_slice; /* slice IRQ is assigned to */
int irq_cpuid; /* kernel logical cpuid */
int irq_irq; /* the IRQ number */
int irq_int_bit; /* Bridge interrupt pin */
/* <0 means MSI */
u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */
int irq_bridge_type;/* pciio asic type (pciio.h) */
void *irq_bridge; /* bridge generating irq */
void *irq_pciioinfo; /* associated pciio_info_t */
int irq_last_intr; /* For Shub lb lost intr WAR */
int irq_cookie; /* unique cookie */
int irq_flags; /* flags */
int irq_share_cnt; /* num devices sharing IRQ */
struct list_head list; /* list of sn_irq_info structs */
struct rcu_head rcu; /* rcu callback list */
};
extern void sn_send_IPI_phys(int, long, int, int);
extern u64 sn_intr_alloc(nasid_t, int,
struct sn_irq_info *,
int, nasid_t, int);
extern void sn_intr_free(nasid_t, int, struct sn_irq_info *);
extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int);
extern void sn_set_err_irq_affinity(unsigned int);
extern struct list_head **sn_irq_lh;
#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
#endif /* _ASM_IA64_SN_INTR_H */
arch/ia64/include/asm/sn/io.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_SN_IO_H
#define _ASM_SN_IO_H
#include <linux/compiler.h>
#include <asm/intrinsics.h>
extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
extern void __sn_mmiowb(void); /* Forward definition */
extern int num_cnodes;
#define __sn_mf_a() ia64_mfa()
extern void sn_dma_flush(unsigned long);
#define __sn_inb ___sn_inb
#define __sn_inw ___sn_inw
#define __sn_inl ___sn_inl
#define __sn_outb ___sn_outb
#define __sn_outw ___sn_outw
#define __sn_outl ___sn_outl
#define __sn_readb ___sn_readb
#define __sn_readw ___sn_readw
#define __sn_readl ___sn_readl
#define __sn_readq ___sn_readq
#define __sn_readb_relaxed ___sn_readb_relaxed
#define __sn_readw_relaxed ___sn_readw_relaxed
#define __sn_readl_relaxed ___sn_readl_relaxed
#define __sn_readq_relaxed ___sn_readq_relaxed
/*
* Convenience macros for setting/clearing bits using the above accessors
*/
#define __sn_setq_relaxed(addr, val) \
writeq((__sn_readq_relaxed(addr) | (val)), (addr))
#define __sn_clrq_relaxed(addr, val) \
writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
/*
* The following routines are SN Platform specific, called when
* a reference is made to inX/outX set macros. SN Platform
* inX set of macros ensures that Posted DMA writes on the
* Bridge is flushed.
*
* The routines should be self explainatory.
*/
static inline unsigned int
___sn_inb (unsigned long port)
{
volatile unsigned char *addr;
unsigned char ret = -1;
if ((addr = sn_io_addr(port))) {
ret = *addr;
__sn_mf_a();
sn_dma_flush((unsigned long)addr);
}
return ret;
}
static inline unsigned int
___sn_inw (unsigned long port)
{
volatile unsigned short *addr;
unsigned short ret = -1;
if ((addr = sn_io_addr(port))) {
ret = *addr;
__sn_mf_a();
sn_dma_flush((unsigned long)addr);
}
return ret;
}
static inline unsigned int
___sn_inl (unsigned long port)
{
volatile unsigned int *addr;
unsigned int ret = -1;
if ((addr = sn_io_addr(port))) {
ret = *addr;
__sn_mf_a();
sn_dma_flush((unsigned long)addr);
}
return ret;
}
static inline void
___sn_outb (unsigned char val, unsigned long port)
{
volatile unsigned char *addr;
if ((addr = sn_io_addr(port))) {
*addr = val;
__sn_mmiowb();
}
}
static inline void
___sn_outw (unsigned short val, unsigned long port)
{
volatile unsigned short *addr;
if ((addr = sn_io_addr(port))) {
*addr = val;
__sn_mmiowb();
}
}
static inline void
___sn_outl (unsigned int val, unsigned long port)
{
volatile unsigned int *addr;
if ((addr = sn_io_addr(port))) {
*addr = val;
__sn_mmiowb();
}
}
/*
* The following routines are SN Platform specific, called when
* a reference is made to readX/writeX set macros. SN Platform
* readX set of macros ensures that Posted DMA writes on the
* Bridge is flushed.
*
* The routines should be self explainatory.
*/
static inline unsigned char
___sn_readb (const volatile void __iomem *addr)
{
unsigned char val;
val = *(volatile unsigned char __force *)addr;
__sn_mf_a();
sn_dma_flush((unsigned long)addr);
return val;
}
static inline unsigned short
___sn_readw (const volatile void __iomem *addr)
{
unsigned short val;
val = *(volatile unsigned short __force *)addr;
__sn_mf_a();
sn_dma_flush((unsigned long)addr);
return val;
}
static inline unsigned int
___sn_readl (const volatile void __iomem *addr)
{
unsigned int val;
val = *(volatile unsigned int __force *)addr;
__sn_mf_a();
sn_dma_flush((unsigned long)addr);
return val;
}
static inline unsigned long
___sn_readq (const volatile void __iomem *addr)
{
unsigned long val;
val = *(volatile unsigned long __force *)addr;
__sn_mf_a();
sn_dma_flush((unsigned long)addr);
return val;
}
/*
* For generic and SN2 kernels, we have a set of fast access
* PIO macros. These macros are provided on SN Platform
* because the normal inX and readX macros perform an
* additional task of flushing Post DMA request on the Bridge.
*
* These routines should be self explainatory.
*/
static inline unsigned int
sn_inb_fast (unsigned long port)
{
volatile unsigned char *addr = (unsigned char *)port;
unsigned char ret;
ret = *addr;
__sn_mf_a();
return ret;
}
static inline unsigned int
sn_inw_fast (unsigned long port)
{
volatile unsigned short *addr = (unsigned short *)port;
unsigned short ret;
ret = *addr;
__sn_mf_a();
return ret;
}
static inline unsigned int
sn_inl_fast (unsigned long port)
{
volatile unsigned int *addr = (unsigned int *)port;
unsigned int ret;
ret = *addr;
__sn_mf_a();
return ret;
}
static inline unsigned char
___sn_readb_relaxed (const volatile void __iomem *addr)
{
return *(volatile unsigned char __force *)addr;
}
static inline unsigned short
___sn_readw_relaxed (const volatile void __iomem *addr)
{
return *(volatile unsigned short __force *)addr;
}
static inline unsigned int
___sn_readl_relaxed (const volatile void __iomem *addr)
{
return *(volatile unsigned int __force *) addr;
}
static inline unsigned long
___sn_readq_relaxed (const volatile void __iomem *addr)
{
return *(volatile unsigned long __force *) addr;
}
struct pci_dev;
static inline int
sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
{
if (vchan > 1) {
return -1;
}
if (!(*addr >> 32)) /* Using a mask here would be cleaner */
return 0; /* but this generates better code */
if (vchan == 1) {
/* Set Bit 57 */
*addr |= (1UL << 57);
} else {
/* Clear Bit 57 */
*addr &= ~(1UL << 57);
}
return 0;
}
#endif /* _ASM_SN_IO_H */
arch/ia64/include/asm/sn/ioc3.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2005 Silicon Graphics, Inc.
*/
#ifndef IA64_SN_IOC3_H
#define IA64_SN_IOC3_H
/* serial port register map */
struct ioc3_serialregs {
uint32_t sscr;
uint32_t stpir;
uint32_t stcir;
uint32_t srpir;
uint32_t srcir;
uint32_t srtr;
uint32_t shadow;
};
/* SUPERIO uart register map */
struct ioc3_uartregs {
char iu_lcr;
union {
char iir; /* read only */
char fcr; /* write only */
} u3;
union {
char ier; /* DLAB == 0 */
char dlm; /* DLAB == 1 */
} u2;
union {
char rbr; /* read only, DLAB == 0 */
char thr; /* write only, DLAB == 0 */
char dll; /* DLAB == 1 */
} u1;
char iu_scr;
char iu_msr;
char iu_lsr;
char iu_mcr;
};
#define iu_rbr u1.rbr
#define iu_thr u1.thr
#define iu_dll u1.dll
#define iu_ier u2.ier
#define iu_dlm u2.dlm
#define iu_iir u3.iir
#define iu_fcr u3.fcr
struct ioc3_sioregs {
char fill[0x170];
struct ioc3_uartregs uartb;
struct ioc3_uartregs uarta;
};
/* PCI IO/mem space register map */
struct ioc3 {
uint32_t pci_id;
uint32_t pci_scr;
uint32_t pci_rev;
uint32_t pci_lat;
uint32_t pci_addr;
uint32_t pci_err_addr_l;
uint32_t pci_err_addr_h;
uint32_t sio_ir;
/* these registers are read-only for general kernel code. To
* modify them use the functions in ioc3.c
*/
uint32_t sio_ies;
uint32_t sio_iec;
uint32_t sio_cr;
uint32_t int_out;
uint32_t mcr;
uint32_t gpcr_s;
uint32_t gpcr_c;
uint32_t gpdr;
uint32_t gppr[9];
char fill[0x4c];
/* serial port registers */
uint32_t sbbr_h;
uint32_t sbbr_l;
struct ioc3_serialregs port_a;
struct ioc3_serialregs port_b;
char fill1[0x1ff10];
/* superio registers */
struct ioc3_sioregs sregs;
};
/* These don't exist on the ioc3 serial card... */
#define eier fill1[8]
#define eisr fill1[4]
#define PCI_LAT 0xc /* Latency Timer */
#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */
#define UARTA_BASE 0x178
#define UARTB_BASE 0x170
/* bitmasks for serial RX status byte */
#define RXSB_OVERRUN 0x01 /* char(s) lost */
#define RXSB_PAR_ERR 0x02 /* parity error */
#define RXSB_FRAME_ERR 0x04 /* framing error */
#define RXSB_BREAK 0x08 /* break character */
#define RXSB_CTS 0x10 /* state of CTS */
#define RXSB_DCD 0x20 /* state of DCD */
#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */
#define RXSB_DATA_VALID 0x80 /* FRAME_ERR PAR_ERR & BREAK valid */
/* bitmasks for serial TX control byte */
#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
#define TXCB_INVALID 0x00 /* byte is invalid */
#define TXCB_VALID 0x40 /* byte is valid */
#define TXCB_MCR 0x80 /* data<7:0> to modem cntrl register */
#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */
/* bitmasks for SBBR_L */
#define SBBR_L_SIZE 0x00000001 /* 0 1KB rings, 1 4KB rings */
/* bitmasks for SSCR_<A:B> */
#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */
#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
#define SSCR_HFC_EN 0x00020000 /* h/w flow cntrl enabled */
#define SSCR_RX_RING_DCD 0x00040000 /* postRX record on delta-DCD */
#define SSCR_RX_RING_CTS 0x00080000 /* postRX record on delta-CTS */
#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */
#define SSCR_DIAG 0x00200000 /* bypass clock divider */
#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */
#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */
#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */
#define SSCR_PAUSE_STATE 0x40000000 /* set when PAUSE takes effect*/
#define SSCR_RESET 0x80000000 /* reset DMA channels */
/* all producer/consumer pointers are the same bitfield */
#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */
#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */
#define PROD_CONS_PTR_OFF 3
/* bitmasks for SRCIR_<A:B> */
#define SRCIR_ARM 0x80000000 /* arm RX timer */
/* bitmasks for SHADOW_<A:B> */
#define SHADOW_DR 0x00000001 /* data ready */
#define SHADOW_OE 0x00000002 /* overrun error */
#define SHADOW_PE 0x00000004 /* parity error */
#define SHADOW_FE 0x00000008 /* framing error */
#define SHADOW_BI 0x00000010 /* break interrupt */
#define SHADOW_THRE 0x00000020 /* transmit holding reg empty */
#define SHADOW_TEMT 0x00000040 /* transmit shift reg empty */
#define SHADOW_RFCE 0x00000080 /* char in RX fifo has error */
#define SHADOW_DCTS 0x00010000 /* delta clear to send */
#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */
#define SHADOW_CTS 0x00100000 /* clear to send */
#define SHADOW_DCD 0x00800000 /* data carrier detect */
#define SHADOW_DTR 0x01000000 /* data terminal ready */
#define SHADOW_RTS 0x02000000 /* request to send */
#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
#define SHADOW_LOOP 0x10000000 /* loopback enabled */
/* bitmasks for SRTR_<A:B> */
#define SRTR_CNT 0x00000fff /* reload value for RX timer */
#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */
#define SRTR_CNT_VAL_SHIFT 16
#define SRTR_HZ 16000 /* SRTR clock frequency */
/* bitmasks for SIO_IR, SIO_IEC and SIO_IES */
#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */
#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */
#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */
#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */
#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */
#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */
#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */
#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */
#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */
#define SIO_IR_SB_TX_MT 0x00000200
#define SIO_IR_SB_RX_FULL 0x00000400
#define SIO_IR_SB_RX_HIGH 0x00000800
#define SIO_IR_SB_RX_TIMER 0x00001000
#define SIO_IR_SB_DELTA_DCD 0x00002000
#define SIO_IR_SB_DELTA_CTS 0x00004000
#define SIO_IR_SB_INT 0x00008000
#define SIO_IR_SB_TX_EXPLICIT 0x00010000
#define SIO_IR_SB_MEMERR 0x00020000
#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */
#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */
#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */
#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */
#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */
#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */
#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */
#define SIO_IR_GEN_INT_SHIFT 28
/* per device interrupt masks */
#define SIO_IR_SA (SIO_IR_SA_TX_MT | \
SIO_IR_SA_RX_FULL | \
SIO_IR_SA_RX_HIGH | \
SIO_IR_SA_RX_TIMER | \
SIO_IR_SA_DELTA_DCD | \
SIO_IR_SA_DELTA_CTS | \
SIO_IR_SA_INT | \
SIO_IR_SA_TX_EXPLICIT | \
SIO_IR_SA_MEMERR)
#define SIO_IR_SB (SIO_IR_SB_TX_MT | \
SIO_IR_SB_RX_FULL | \
SIO_IR_SB_RX_HIGH | \
SIO_IR_SB_RX_TIMER | \
SIO_IR_SB_DELTA_DCD | \
SIO_IR_SB_DELTA_CTS | \
SIO_IR_SB_INT | \
SIO_IR_SB_TX_EXPLICIT | \
SIO_IR_SB_MEMERR)
#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \
SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1)
/* bitmasks for SIO_CR */
#define SIO_CR_CMD_PULSE_SHIFT 15
#define SIO_CR_SER_A_BASE_SHIFT 1
#define SIO_CR_SER_B_BASE_SHIFT 8
#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */
#define SIO_CR_ARB_DIAG_TXA 0x00000000
#define SIO_CR_ARB_DIAG_RXA 0x00080000
#define SIO_CR_ARB_DIAG_TXB 0x00100000
#define SIO_CR_ARB_DIAG_RXB 0x00180000
#define SIO_CR_ARB_DIAG_PP 0x00200000
#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */
/* defs for some of the generic I/O pins */
#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */
#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */
#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */
#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */
#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrling uartb modeselect */
#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrling uarta modeselect */
#endif /* IA64_SN_IOC3_H */
arch/ia64/include/asm/sn/klconfig.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Derived from IRIX <sys/SN/klconfig.h>.
*
* Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (C) 1999 by Ralf Baechle
*/
#ifndef _ASM_IA64_SN_KLCONFIG_H
#define _ASM_IA64_SN_KLCONFIG_H
/*
* The KLCONFIG structures store info about the various BOARDs found
* during Hardware Discovery. In addition, it stores info about the
* components found on the BOARDs.
*/
typedef s32 klconf_off_t;
/* Functions/macros needed to use this structure */
typedef struct kl_config_hdr {
char pad[20];
klconf_off_t ch_board_info; /* the link list of boards */
char pad0[88];
} kl_config_hdr_t;
#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
/*
* The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
* can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
* the LOCAL/current NODE. REMOTE means it is attached to a different
* node.(TBD - Need a way to treat ROUTER boards.)
*
* There are 2 different structures to represent these boards -
* lboard - Local board, rboard - remote board. These 2 structures
* can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
* Figure below). The first byte of the rboard or lboard structure
* is used to find out its type - no unions are used.
* If it is a lboard, then the config info of this board will be found
* on the local node. (LOCAL NODE BASE + offset value gives pointer to
* the structure.
* If it is a rboard, the local structure contains the node number
* and the offset of the beginning of the LINKED LIST on the remote node.
* The details of the hardware on a remote node can be built locally,
* if required, by reading the LINKED LIST on the remote node and
* ignoring all the rboards on that node.
*
* The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
* First board info on the remote node. The remote node list is
* traversed as the local list, using the REMOTE BASE ADDRESS and not
* the local base address and ignoring all rboard values.
*
*
KLCONFIG
+------------+ +------------+ +------------+ +------------+
| lboard | +-->| lboard | +-->| rboard | +-->| lboard |
+------------+ | +------------+ | +------------+ | +------------+
| board info | | | board info | | |errinfo,bptr| | | board info |
+------------+ | +------------+ | +------------+ | +------------+
| offset |--+ | offset |--+ | offset |--+ |offset=NULL |
+------------+ +------------+ +------------+ +------------+
+------------+
| board info |
+------------+ +--------------------------------+
| compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
+------------+ +--------------------------------+
| compt 2 |--+
+------------+ | +--------------------------------+
| ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
+------------+ +--------------------------------+
| errinfo |--+
+------------+ | +--------------------------------+
+--->|r/l brd errinfo,compt err flags |
+--------------------------------+
*
* Each BOARD consists of COMPONENTs and the BOARD structure has
* pointers (offsets) to its COMPONENT structure.
* The COMPONENT structure has version info, size and speed info, revision,
* error info and the NIC info. This structure can accommodate any
* BOARD with arbitrary COMPONENT composition.
*
* The ERRORINFO part of each BOARD has error information
* that describes errors about the BOARD itself. It also has flags to
* indicate the COMPONENT(s) on the board that have errors. The error
* information specific to the COMPONENT is present in the respective
* COMPONENT structure.
*
* The ERRORINFO structure is also treated like a COMPONENT, ie. the
* BOARD has pointers(offset) to the ERRORINFO structure. The rboard
* structure also has a pointer to the ERRORINFO structure. This is
* the place to store ERRORINFO about a REMOTE NODE, if the HUB on
* that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
* only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
* be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
* which is present on the REMOTE NODE.(TBD)
* REMOTE ERRINFO can be stored on any of the nearest nodes
* or on all the nearest nodes.(TBD)
* Like BOARD structures, REMOTE ERRINFO structures can be built locally
* using the rboard errinfo pointer.
*
* In order to get useful information from this Data organization, a set of
* interface routines are provided (TBD). The important thing to remember while
* manipulating the structures, is that, the NODE number information should
* be used. If the NODE is non-zero (remote) then each offset should
* be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
* This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
*
* Note that these structures do not provide much info about connectivity.
* That info will be part of HWGRAPH, which is an extension of the cfg_t
* data structure. (ref IP27prom/cfg.h) It has to be extended to include
* the IO part of the Network(TBD).
*
* The data structures below define the above concepts.
*/
/*
* BOARD classes
*/
#define KLCLASS_MASK 0xf0
#define KLCLASS_NONE 0x00
#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
#define KLCLASS_CPU KLCLASS_NODE
#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
and the non-graphics widget boards */
#define KLCLASS_ROUTER 0x30 /* Router board */
#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
so that we can record error info */
#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */
#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */
#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
/*
* board types
*/
#define KLTYPE_MASK 0x0f
#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
#define KLTYPE_SNIA (KLCLASS_CPU | 0x1)
#define KLTYPE_TIO (KLCLASS_CPU | 0x2)
#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4)
#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6)
#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7)
#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8)
#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9)
#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa)
#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb)
#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc)
#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd)
/*
* board structures
*/
#define MAX_COMPTS_PER_BRD 24
typedef struct lboard_s {
klconf_off_t brd_next_any; /* Next BOARD */
unsigned char struct_type; /* type of structure, local or remote */
unsigned char brd_type; /* type+class */
unsigned char brd_sversion; /* version of this structure */
unsigned char brd_brevision; /* board revision */
unsigned char brd_promver; /* board prom version, if any */
unsigned char brd_flags; /* Enabled, Disabled etc */
unsigned char brd_slot; /* slot number */
unsigned short brd_debugsw; /* Debug switches */
geoid_t brd_geoid; /* geo id */
partid_t brd_partition; /* Partition number */
unsigned short brd_diagval; /* diagnostic value */
unsigned short brd_diagparm; /* diagnostic parameter */
unsigned char brd_inventory; /* inventory history */
unsigned char brd_numcompts; /* Number of components */
nic_t brd_nic; /* Number in CAN */
nasid_t brd_nasid; /* passed parameter */
klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
klconf_off_t brd_errinfo; /* Board's error information */
struct lboard_s *brd_parent; /* Logical parent for this brd */
char pad0[4];
unsigned char brd_confidence; /* confidence that the board is bad */
nasid_t brd_owner; /* who owns this board */
unsigned char brd_nic_flags; /* To handle 8 more NICs */
char pad1[24]; /* future expansion */
char brd_name[32];
nasid_t brd_next_same_host; /* host of next brd w/same nasid */
klconf_off_t brd_next_same; /* Next BOARD with same nasid */
} lboard_t;
/*
* Generic info structure. This stores common info about a
* component.
*/
typedef struct klinfo_s { /* Generic info */
unsigned char struct_type; /* type of this structure */
unsigned char struct_version; /* version of this structure */
unsigned char flags; /* Enabled, disabled etc */
unsigned char revision; /* component revision */
unsigned short diagval; /* result of diagnostics */
unsigned short diagparm; /* diagnostic parameter */
unsigned char inventory; /* previous inventory status */
unsigned short partid; /* widget part number */
nic_t nic; /* MUst be aligned properly */
unsigned char physid; /* physical id of component */
unsigned int virtid; /* virtual id as seen by system */
unsigned char widid; /* Widget id - if applicable */
nasid_t nasid; /* node number - from parent */
char pad1; /* pad out structure. */
char pad2; /* pad out structure. */
void *data;
klconf_off_t errinfo; /* component specific errors */
unsigned short pad3; /* pci fields have moved over to */
unsigned short pad4; /* klbri_t */
} klinfo_t ;
static inline lboard_t *find_lboard_next(lboard_t * brd)
{
if (brd && brd->brd_next_any)
return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
return NULL;
}
#endif /* _ASM_IA64_SN_KLCONFIG_H */
arch/ia64/include/asm/sn/l1.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved.
*/
#ifndef _ASM_IA64_SN_L1_H
#define _ASM_IA64_SN_L1_H
/* brick type response codes */
#define L1_BRICKTYPE_PX 0x23 /* # */
#define L1_BRICKTYPE_PE 0x25 /* % */
#define L1_BRICKTYPE_N_p0 0x26 /* & */
#define L1_BRICKTYPE_IP45 0x34 /* 4 */
#define L1_BRICKTYPE_IP41 0x35 /* 5 */
#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */
#define L1_BRICKTYPE_IX 0x3d /* = */
#define L1_BRICKTYPE_IP34 0x61 /* a */
#define L1_BRICKTYPE_GA 0x62 /* b */
#define L1_BRICKTYPE_C 0x63 /* c */
#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */
#define L1_BRICKTYPE_I 0x69 /* i */
#define L1_BRICKTYPE_N 0x6e /* n */
#define L1_BRICKTYPE_OPUS 0x6f /* o */
#define L1_BRICKTYPE_P 0x70 /* p */
#define L1_BRICKTYPE_R 0x72 /* r */
#define L1_BRICKTYPE_CHI_CG 0x76 /* v */
#define L1_BRICKTYPE_X 0x78 /* x */
#define L1_BRICKTYPE_X2 0x79 /* y */
#define L1_BRICKTYPE_SA 0x5e /* ^ */
#define L1_BRICKTYPE_PA 0x6a /* j */
#define L1_BRICKTYPE_IA 0x6b /* k */
#define L1_BRICKTYPE_ATHENA 0x2b /* + */
#define L1_BRICKTYPE_DAYTONA 0x7a /* z */
#define L1_BRICKTYPE_1932 0x2c /* . */
#define L1_BRICKTYPE_191010 0x2e /* , */
/* board type response codes */
#define L1_BOARDTYPE_IP69 0x0100 /* CA */
#define L1_BOARDTYPE_IP63 0x0200 /* CB */
#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */
#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */
#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */
#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */
#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */
#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */
#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */
#endif /* _ASM_IA64_SN_L1_H */
arch/ia64/include/asm/sn/leds.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
* Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_LEDS_H
#define _ASM_IA64_SN_LEDS_H
#include <asm/sn/addrs.h>
#include <asm/sn/pda.h>
#include <asm/sn/shub_mmr.h>
#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
#define LED_CPU_SHIFT 16
#define LED_CPU_HEARTBEAT 0x01
#define LED_CPU_ACTIVITY 0x02
#define LED_ALWAYS_SET 0x00
/*
* Basic macros for flashing the LEDS on an SGI SN.
*/
static __inline__ void
set_led_bits(u8 value, u8 mask)
{
pda->led_state = (pda->led_state & ~mask) | (value & mask);
*pda->led_address = (short) pda->led_state;
}
#endif /* _ASM_IA64_SN_LEDS_H */
arch/ia64/include/asm/sn/module.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_MODULE_H
#define _ASM_IA64_SN_MODULE_H
/* parameter for format_module_id() */
#define MODULE_FORMAT_BRIEF 1
#define MODULE_FORMAT_LONG 2
#define MODULE_FORMAT_LCD 3
/*
* Module id format
*
* 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int)
* 15-8 Brick type (8-bit ascii character)
* 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int)
*
*/
/*
* Macros for getting the brick type
*/
#define MODULE_BTYPE_MASK 0xff00
#define MODULE_BTYPE_SHFT 8
#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
#define MODULE_BT_TO_CHAR(_b) ((char)(_b))
#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
/*
* Macros for getting the rack ID.
*/
#define MODULE_RACK_MASK 0xffff0000
#define MODULE_RACK_SHFT 16
#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
/*
* Macros for getting the brick position
*/
#define MODULE_BPOS_MASK 0x00ff
#define MODULE_BPOS_SHFT 0
#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
/*
* Macros for encoding and decoding rack IDs
* A rack number consists of three parts:
* class (0==CPU/mixed, 1==I/O), group, number
*
* Rack number is stored just as it is displayed on the screen:
* a 3-decimal-digit number.
*/
#define RACK_CLASS_DVDR 100
#define RACK_GROUP_DVDR 10
#define RACK_NUM_DVDR 1
#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \
(_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR)
#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \
RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \
RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \
RACK_GROUP_DVDR) / RACK_NUM_DVDR)
/*
* Macros for encoding and decoding rack IDs
* A rack number consists of three parts:
* class 1 bit, 0==CPU/mixed, 1==I/O
* group 2 bits for CPU/mixed, 3 bits for I/O
* number 3 bits for CPU/mixed, 2 bits for I/O (1 based)
*/
#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2)
#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3)
#define RACK_CLASS_MASK(_r) 0x20
#define RACK_CLASS_SHFT(_r) 5
#define RACK_ADD_CLASS(_r, _c) \
((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r)
#define RACK_GROUP_MASK(_r) \
( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
#define RACK_ADD_GROUP(_r, _g) \
((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
#define RACK_NUM_SHFT(_r) 0
#define RACK_NUM_MASK(_r) \
( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
#define RACK_ADD_NUM(_r, _n) \
((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
/*
* Brick type definitions
*/
#define MAX_BRICK_TYPES 256 /* brick type is stored as uchar */
extern char brick_types[];
#define MODULE_CBRICK 0
#define MODULE_RBRICK 1
#define MODULE_IBRICK 2
#define MODULE_KBRICK 3
#define MODULE_XBRICK 4
#define MODULE_DBRICK 5
#define MODULE_PBRICK 6
#define MODULE_NBRICK 7
#define MODULE_PEBRICK 8
#define MODULE_PXBRICK 9
#define MODULE_IXBRICK 10
#define MODULE_CGBRICK 11
#define MODULE_OPUSBRICK 12
#define MODULE_SABRICK 13 /* TIO BringUp Brick */
#define MODULE_IABRICK 14
#define MODULE_PABRICK 15
#define MODULE_GABRICK 16
#define MODULE_OPUS_TIO 17 /* OPUS TIO Riser */
extern char brick_types[];
extern void format_module_id(char *, moduleid_t, int);
#endif /* _ASM_IA64_SN_MODULE_H */
arch/ia64/include/asm/sn/mspec.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_MSPEC_H
#define _ASM_IA64_SN_MSPEC_H
#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
#define FETCHOP_LOAD 0
#define FETCHOP_INCREMENT 8
#define FETCHOP_DECREMENT 16
#define FETCHOP_CLEAR 24
#define FETCHOP_STORE 0
#define FETCHOP_AND 24
#define FETCHOP_OR 32
#define FETCHOP_CLEAR_CACHE 56
#define FETCHOP_LOAD_OP(addr, op) ( \
*(volatile long *)((char*) (addr) + (op)))
#define FETCHOP_STORE_OP(addr, op, x) ( \
*(volatile long *)((char*) (addr) + (op)) = (long) (x))
#ifdef __KERNEL__
/*
* Each Atomic Memory Operation (amo, formerly known as fetchop)
* variable is 64 bytes long. The first 8 bytes are used. The
* remaining 56 bytes are unaddressable due to the operation taking
* that portion of the address.
*
* NOTE: The amo structure _MUST_ be placed in either the first or second
* half of the cache line. The cache line _MUST NOT_ be used for anything
* other than additional amo entries. This is because there are two
* addresses which reference the same physical cache line. One will
* be a cached entry with the memory type bits all set. This address
* may be loaded into processor cache. The amo will be referenced
* uncached via the memory special memory type. If any portion of the
* cached cache-line is modified, when that line is flushed, it will
* overwrite the uncached value in physical memory and lead to
* inconsistency.
*/
struct amo {
u64 variable;
u64 unused[7];
};
#endif /* __KERNEL__ */
#endif /* _ASM_IA64_SN_MSPEC_H */
arch/ia64/include/asm/sn/nodepda.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_NODEPDA_H
#define _ASM_IA64_SN_NODEPDA_H
#include <asm/irq.h>
#include <asm/sn/arch.h>
#include <asm/sn/intr.h>
#include <asm/sn/bte.h>
/*
* NUMA Node-Specific Data structures are defined in this file.
* In particular, this is the location of the node PDA.
* A pointer to the right node PDA is saved in each CPU PDA.
*/
/*
* Node-specific data structure.
*
* One of these structures is allocated on each node of a NUMA system.
*
* This structure provides a convenient way of keeping together
* all per-node data structures.
*/
struct phys_cpuid {
short nasid;
char subnode;
char slice;
};
struct nodepda_s {
void *pdinfo; /* Platform-dependent per-node info */
/*
* The BTEs on this node are shared by the local cpus
*/
struct bteinfo_s bte_if[MAX_BTES_PER_NODE]; /* Virtual Interface */
struct timer_list bte_recovery_timer;
spinlock_t bte_recovery_lock;
/*
* Array of pointers to the nodepdas for each node.
*/
struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES];
/*
* Array of physical cpu identifiers. Indexed by cpuid.
*/
struct phys_cpuid phys_cpuid[NR_CPUS];
spinlock_t ptc_lock ____cacheline_aligned_in_smp;
};
typedef struct nodepda_s nodepda_t;
/*
* Access Functions for node PDA.
* Since there is one nodepda for each node, we need a convenient mechanism
* to access these nodepdas without cluttering code with #ifdefs.
* The next set of definitions provides this.
* Routines are expected to use
*
* sn_nodepda - to access node PDA for the node on which code is running
* NODEPDA(cnodeid) - to access node PDA for cnodeid
*/
DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda);
#define sn_nodepda __this_cpu_read(__sn_nodepda)
#define NODEPDA(cnodeid) (sn_nodepda->pernode_pdaindr[cnodeid])
/*
* Check if given a compact node id the corresponding node has all the
* cpus disabled.
*/
#define is_headless_node(cnodeid) (nr_cpus_node(cnodeid) == 0)
#endif /* _ASM_IA64_SN_NODEPDA_H */
arch/ia64/include/asm/sn/pcibr_provider.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
#include <asm/sn/intr.h>
#include <asm/sn/pcibus_provider_defs.h>
/* Workarounds */
#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */
#define BUSTYPE_MASK 0x1
/* Macros given a pcibus structure */
#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK)
#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \
asic == PCIIO_ASIC_TYPE_TIOCP)
#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC)
#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP)
/*
* The different PCI Bridge types supported on the SGI Altix platforms
*/
#define PCIBR_BRIDGETYPE_UNKNOWN -1
#define PCIBR_BRIDGETYPE_PIC 2
#define PCIBR_BRIDGETYPE_TIOCP 3
/*
* Bridge 64bit Direct Map Attributes
*/
#define PCI64_ATTR_PREF (1ull << 59)
#define PCI64_ATTR_PREC (1ull << 58)
#define PCI64_ATTR_VIRTUAL (1ull << 57)
#define PCI64_ATTR_BAR (1ull << 56)
#define PCI64_ATTR_SWAP (1ull << 55)
#define PCI64_ATTR_VIRTUAL1 (1ull << 54)
#define PCI32_LOCAL_BASE 0
#define PCI32_MAPPED_BASE 0x40000000
#define PCI32_DIRECT_BASE 0x80000000
#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \
(u64)(x) >= PCI32_MAPPED_BASE)
#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE)
/*
* Bridge PMU Address Transaltion Entry Attibutes
*/
#define PCI32_ATE_V (0x1 << 0)
#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */
#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */
#define PCI32_ATE_MSI (0x1 << 2)
#define PCI32_ATE_PREF (0x1 << 3)
#define PCI32_ATE_BAR (0x1 << 4)
#define PCI32_ATE_ADDR_SHFT 12
#define MINIMAL_ATES_REQUIRED(addr, size) \
(IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1))
#define MINIMAL_ATE_FLAG(addr, size) \
(MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0)
/* bit 29 of the pci address is the SWAP bit */
#define ATE_SWAPSHIFT 29
#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT))
#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT))
/*
* I/O page size
*/
#if PAGE_SIZE < 16384
#define IOPFNSHIFT 12 /* 4K per mapped page */
#else
#define IOPFNSHIFT 14 /* 16K per mapped page */
#endif
#define IOPGSIZE (1 << IOPFNSHIFT)
#define IOPG(x) ((x) >> IOPFNSHIFT)
#define IOPGOFF(x) ((x) & (IOPGSIZE-1))
#define PCIBR_DEV_SWAP_DIR (1ull << 19)
#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21)
/*
* PMU resources.
*/
struct ate_resource{
u64 *ate;
u64 num_ate;
u64 lowest_free_index;
};
struct pcibus_info {
struct pcibus_bussoft pbi_buscommon; /* common header */
u32 pbi_moduleid;
short pbi_bridge_type;
short pbi_bridge_mode;
struct ate_resource pbi_int_ate_resource;
u64 pbi_int_ate_size;
u64 pbi_dir_xbase;
char pbi_hub_xid;
u64 pbi_devreg[8];
u32 pbi_valid_devices;
u32 pbi_enabled_devices;
spinlock_t pbi_lock;
};
extern int pcibr_init_provider(void);
extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *);
extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type);
extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type);
extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
/*
* prototypes for the bridge asic register access routines in pcibr_reg.c
*/
extern void pcireg_control_bit_clr(struct pcibus_info *, u64);
extern void pcireg_control_bit_set(struct pcibus_info *, u64);
extern u64 pcireg_tflush_get(struct pcibus_info *);
extern u64 pcireg_intr_status_get(struct pcibus_info *);
extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64);
extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64);
extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64);
extern void pcireg_force_intr_set(struct pcibus_info *, int);
extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int);
extern void pcireg_int_ate_set(struct pcibus_info *, int, u64);
extern u64 __iomem * pcireg_int_ate_addr(struct pcibus_info *, int);
extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info);
extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
extern int pcibr_ate_alloc(struct pcibus_info *, int);
extern void pcibr_ate_free(struct pcibus_info *, int);
extern void ate_write(struct pcibus_info *, int, int, u64);
extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
void *resp, char **ssdt);
extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
int action, void *resp);
extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
#endif
arch/ia64/include/asm/sn/pcibus_provider_defs.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
/*
* SN pci asic types. Do not ever renumber these or reuse values. The
* values must agree with what prom thinks they are.
*/
#define PCIIO_ASIC_TYPE_UNKNOWN 0
#define PCIIO_ASIC_TYPE_PPB 1
#define PCIIO_ASIC_TYPE_PIC 2
#define PCIIO_ASIC_TYPE_TIOCP 3
#define PCIIO_ASIC_TYPE_TIOCA 4
#define PCIIO_ASIC_TYPE_TIOCE 5
#define PCIIO_ASIC_MAX_TYPES 6
/*
* Common pciio bus provider data. There should be one of these as the
* first field in any pciio based provider soft structure (e.g. pcibr_soft
* tioca_soft, etc).
*/
struct pcibus_bussoft {
u32 bs_asic_type; /* chipset type */
u32 bs_xid; /* xwidget id */
u32 bs_persist_busnum; /* Persistent Bus Number */
u32 bs_persist_segment; /* Segment Number */
u64 bs_legacy_io; /* legacy io pio addr */
u64 bs_legacy_mem; /* legacy mem pio addr */
u64 bs_base; /* widget base */
struct xwidget_info *bs_xwidget_info;
};
struct pci_controller;
/*
* SN pci bus indirection
*/
struct sn_pcibus_provider {
dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t, int flags);
dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags);
void (*dma_unmap)(struct pci_dev *, dma_addr_t, int);
void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *);
void (*force_interrupt)(struct sn_irq_info *);
void (*target_interrupt)(struct sn_irq_info *);
};
/*
* Flags used by the map interfaces
* bits 3:0 specifies format of passed in address
* bit 4 specifies that address is to be used for MSI
*/
#define SN_DMA_ADDRTYPE(x) ((x) & 0xf)
#define SN_DMA_ADDR_PHYS 1 /* address is an xio address. */
#define SN_DMA_ADDR_XIO 2 /* address is phys memory */
#define SN_DMA_MSI 0x10 /* Bus address is to be used for MSI */
extern struct sn_pcibus_provider *sn_pci_provider[];
#endif /* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */
arch/ia64/include/asm/sn/pcidev.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_PCI_PCIDEV_H
#define _ASM_IA64_SN_PCI_PCIDEV_H
#include <linux/pci.h>
/*
* In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to
* the pcidev_info structs for all devices under a controller, we keep a
* list of pcidev_info under pci_controller->platform_data.
*/
struct sn_platform_data {
void *provider_soft;
struct list_head pcidev_info;
};
#define SN_PLATFORM_DATA(busdev) \
((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data))
#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev)
/*
* Given a pci_bus, return the sn pcibus_bussoft struct. Note that
* this only works for root busses, not for busses represented by PPB's.
*/
#define SN_PCIBUS_BUSSOFT(pci_bus) \
((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
/*
* Given a struct pci_dev, return the sn pcibus_bussoft struct. Note
* that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
* due to possible PPB's in the path.
*/
#define SN_PCIDEV_BUSSOFT(pci_dev) \
(SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info)
#define SN_PCIDEV_BUSPROVIDER(pci_dev) \
(SN_PCIDEV_INFO(pci_dev)->pdi_provider)
#define PCIIO_BUS_NONE 255 /* bus 255 reserved */
#define PCIIO_SLOT_NONE 255
#define PCIIO_FUNC_NONE 255
#define PCIIO_VENDOR_ID_NONE (-1)
struct pcidev_info {
u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */
struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */
struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */
struct pci_dev *pdi_linux_pcidev; /* Kernel pci_dev */
struct sn_irq_info *pdi_sn_irq_info;
struct sn_pcibus_provider *pdi_provider; /* sn pci ops */
struct pci_dev *host_pci_dev; /* host bus link */
struct list_head pdi_list; /* List of pcidev_info */
};
extern void sn_irq_fixup(struct pci_dev *pci_dev,
struct sn_irq_info *sn_irq_info);
extern void sn_irq_unfixup(struct pci_dev *pci_dev);
extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
extern void sn_bus_fixup(struct pci_bus *);
extern void sn_acpi_bus_fixup(struct pci_bus *);
extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
extern void sn_bus_store_sysdata(struct pci_dev *dev);
extern void sn_bus_free_sysdata(void);
extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
extern void sn_io_slot_fixup(struct pci_dev *);
extern void sn_acpi_slot_fixup(struct pci_dev *);
extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
struct sn_irq_info *);
extern void sn_pci_unfixup_slot(struct pci_dev *dev);
extern void sn_irq_lh_init(void);
#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */
arch/ia64/include/asm/sn/pda.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_PDA_H
#define _ASM_IA64_SN_PDA_H
#include <linux/cache.h>
#include <asm/percpu.h>
/*
* CPU-specific data structure.
*
* One of these structures is allocated for each cpu of a NUMA system.
*
* This structure provides a convenient way of keeping together
* all SN per-cpu data structures.
*/
typedef struct pda_s {
/*
* Support for SN LEDs
*/
volatile short *led_address;
u8 led_state;
u8 hb_state; /* supports blinking heartbeat leds */
unsigned int hb_count;
unsigned int idle_flag;
volatile unsigned long *bedrock_rev_id;
volatile unsigned long *pio_write_status_addr;
unsigned long pio_write_status_val;
volatile unsigned long *pio_shub_war_cam_addr;
unsigned long sn_in_service_ivecs[4];
int sn_lb_int_war_ticks;
int sn_last_irq;
int sn_first_irq;
} pda_t;
#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
/*
* PDA
* Per-cpu private data area for each cpu. The PDA is located immediately after
* the IA64 cpu_data area. A full page is allocated for the cp_data area for each
* cpu but only a small amout of the page is actually used. We put the SNIA PDA
* in the same page as the cpu_data area. Note that there is a check in the setup
* code to verify that we don't overflow the page.
*
* Seems like we should should cache-line align the pda so that any changes in the
* size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
* or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
*/
DECLARE_PER_CPU(struct pda_s, pda_percpu);
#define pda (&__ia64_per_cpu_var(pda_percpu))
#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu))
#endif /* _ASM_IA64_SN_PDA_H */
arch/ia64/include/asm/sn/pic.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_PCI_PIC_H
#define _ASM_IA64_SN_PCI_PIC_H
/*
* PIC AS DEVICE ZERO
* ------------------
*
* PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC)
* be designated as 'device 0'. That is a departure from earlier SGI
* PCI bridges. Because of that we use config space 1 to access the
* config space of the first actual PCI device on the bus.
* Here's what the PIC manual says:
*
* The current PCI-X bus specification now defines that the parent
* hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC
* reduced the total number of devices from 8 to 4 and removed the
* device registers and windows, now only supporting devices 0,1,2, and
* 3. PIC did leave all 8 configuration space windows. The reason was
* there was nothing to gain by removing them. Here in lies the problem.
* The device numbering we do using 0 through 3 is unrelated to the device
* numbering which PCI-X requires in configuration space. In the past we
* correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc.
* PCI-X requires we start a 1, not 0 and currently the PX brick
* does associate our:
*
* device 0 with configuration space window 1,
* device 1 with configuration space window 2,
* device 2 with configuration space window 3,
* device 3 with configuration space window 4.
*
* The net effect is that all config space access are off-by-one with
* relation to other per-slot accesses on the PIC.
* Here is a table that shows some of that:
*
* Internal Slot#
* |
* | 0 1 2 3
* ----------|---------------------------------------
* config | 0x21000 0x22000 0x23000 0x24000
* |
* even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd
* |
* odd rrb | n/a 0[1] n/a 1[1]
* |
* int dev | 00 01 10 11
* |
* ext slot# | 1 2 3 4
* ----------|---------------------------------------
*/
#define PIC_ATE_TARGETID_SHFT 8
#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL
#define PIC_PCI64_ATTR_TARG_SHFT 60
/*****************************************************************************
*********************** PIC MMR structure mapping ***************************
*****************************************************************************/
/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0]
* of a 64-bit register. When writing PIC registers, always write the
* entire 64 bits.
*/
struct pic {
/* 0x000000-0x00FFFF -- Local Registers */
/* 0x000000-0x000057 -- Standard Widget Configuration */
u64 p_wid_id; /* 0x000000 */
u64 p_wid_stat; /* 0x000008 */
u64 p_wid_err_upper; /* 0x000010 */
u64 p_wid_err_lower; /* 0x000018 */
#define p_wid_err p_wid_err_lower
u64 p_wid_control; /* 0x000020 */
u64 p_wid_req_timeout; /* 0x000028 */
u64 p_wid_int_upper; /* 0x000030 */
u64 p_wid_int_lower; /* 0x000038 */
#define p_wid_int p_wid_int_lower
u64 p_wid_err_cmdword; /* 0x000040 */
u64 p_wid_llp; /* 0x000048 */
u64 p_wid_tflush; /* 0x000050 */
/* 0x000058-0x00007F -- Bridge-specific Widget Configuration */
u64 p_wid_aux_err; /* 0x000058 */
u64 p_wid_resp_upper; /* 0x000060 */
u64 p_wid_resp_lower; /* 0x000068 */
#define p_wid_resp p_wid_resp_lower
u64 p_wid_tst_pin_ctrl; /* 0x000070 */
u64 p_wid_addr_lkerr; /* 0x000078 */
/* 0x000080-0x00008F -- PMU & MAP */
u64 p_dir_map; /* 0x000080 */
u64 _pad_000088; /* 0x000088 */
/* 0x000090-0x00009F -- SSRAM */
u64 p_map_fault; /* 0x000090 */
u64 _pad_000098; /* 0x000098 */
/* 0x0000A0-0x0000AF -- Arbitration */
u64 p_arb; /* 0x0000A0 */
u64 _pad_0000A8; /* 0x0000A8 */
/* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
u64 p_ate_parity_err; /* 0x0000B0 */
u64 _pad_0000B8; /* 0x0000B8 */
/* 0x0000C0-0x0000FF -- PCI/GIO */
u64 p_bus_timeout; /* 0x0000C0 */
u64 p_pci_cfg; /* 0x0000C8 */
u64 p_pci_err_upper; /* 0x0000D0 */
u64 p_pci_err_lower; /* 0x0000D8 */
#define p_pci_err p_pci_err_lower
u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */
/* 0x000100-0x0001FF -- Interrupt */
u64 p_int_status; /* 0x000100 */
u64 p_int_enable; /* 0x000108 */
u64 p_int_rst_stat; /* 0x000110 */
u64 p_int_mode; /* 0x000118 */
u64 p_int_device; /* 0x000120 */
u64 p_int_host_err; /* 0x000128 */
u64 p_int_addr[8]; /* 0x0001{30,,,68} */
u64 p_err_int_view; /* 0x000170 */
u64 p_mult_int; /* 0x000178 */
u64 p_force_always[8]; /* 0x0001{80,,,B8} */
u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */
/* 0x000200-0x000298 -- Device */
u64 p_device[4]; /* 0x0002{00,,,18} */
u64 _pad_000220[4]; /* 0x0002{20,,,38} */
u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */
u64 _pad_000260[4]; /* 0x0002{60,,,78} */
u64 p_rrb_map[2]; /* 0x0002{80,,,88} */
#define p_even_resp p_rrb_map[0] /* 0x000280 */
#define p_odd_resp p_rrb_map[1] /* 0x000288 */
u64 p_resp_status; /* 0x000290 */
u64 p_resp_clear; /* 0x000298 */
u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */
/* 0x000300-0x0003F8 -- Buffer Address Match Registers */
struct {
u64 upper; /* 0x0003{00,,,F0} */
u64 lower; /* 0x0003{08,,,F8} */
} p_buf_addr_match[16];
/* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
struct {
u64 flush_w_touch; /* 0x000{400,,,5C0} */
u64 flush_wo_touch; /* 0x000{408,,,5C8} */
u64 inflight; /* 0x000{410,,,5D0} */
u64 prefetch; /* 0x000{418,,,5D8} */
u64 total_pci_retry; /* 0x000{420,,,5E0} */
u64 max_pci_retry; /* 0x000{428,,,5E8} */
u64 max_latency; /* 0x000{430,,,5F0} */
u64 clear_all; /* 0x000{438,,,5F8} */
} p_buf_count[8];
/* 0x000600-0x0009FF -- PCI/X registers */
u64 p_pcix_bus_err_addr; /* 0x000600 */
u64 p_pcix_bus_err_attr; /* 0x000608 */
u64 p_pcix_bus_err_data; /* 0x000610 */
u64 p_pcix_pio_split_addr; /* 0x000618 */
u64 p_pcix_pio_split_attr; /* 0x000620 */
u64 p_pcix_dma_req_err_attr; /* 0x000628 */
u64 p_pcix_dma_req_err_addr; /* 0x000630 */
u64 p_pcix_timeout; /* 0x000638 */
u64 _pad_000640[120]; /* 0x000{640,,,9F8} */
/* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
struct {
u64 p_buf_addr; /* 0x000{A00,,,AF0} */
u64 p_buf_attr; /* 0X000{A08,,,AF8} */
} p_pcix_read_buf_64[16];
struct {
u64 p_buf_addr; /* 0x000{B00,,,BE0} */
u64 p_buf_attr; /* 0x000{B08,,,BE8} */
u64 p_buf_valid; /* 0x000{B10,,,BF0} */
u64 __pad1; /* 0x000{B18,,,BF8} */
} p_pcix_write_buf_64[8];
/* End of Local Registers -- Start of Address Map space */
char _pad_000c00[0x010000 - 0x000c00];
/* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */
u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */
/* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */
u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */
char _pad_014000[0x18000 - 0x014000];
/* 0x18000-0x197F8 -- PIC Write Request Ram */
u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
char _pad_019800[0x20000 - 0x019800];
/* 0x020000-0x027FFF -- PCI Device Configuration Spaces */
union {
u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
union {
u8 c[0x100 / 1];
u16 s[0x100 / 2];
u32 l[0x100 / 4];
u64 d[0x100 / 8];
} f[8];
} p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */
/* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
union {
u8 c[0x1000 / 1]; /* 0x028000-0x029000 */
u16 s[0x1000 / 2]; /* 0x028000-0x029000 */
u32 l[0x1000 / 4]; /* 0x028000-0x029000 */
u64 d[0x1000 / 8]; /* 0x028000-0x029000 */
union {
u8 c[0x100 / 1];
u16 s[0x100 / 2];
u32 l[0x100 / 4];
u64 d[0x100 / 8];
} f[8];
} p_type1_cfg; /* 0x028000-0x029000 */
char _pad_029000[0x030000-0x029000];
/* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
union {
u8 c[8 / 1];
u16 s[8 / 2];
u32 l[8 / 4];
u64 d[8 / 8];
} p_pci_iack; /* 0x030000-0x030007 */
char _pad_030007[0x040000-0x030008];
/* 0x040000-0x030007 -- PCIX Special Cycle */
union {
u8 c[8 / 1];
u16 s[8 / 2];
u32 l[8 / 4];
u64 d[8 / 8];
} p_pcix_cycle; /* 0x040000-0x040007 */
};
#endif /* _ASM_IA64_SN_PCI_PIC_H */
arch/ia64/include/asm/sn/rw_mmr.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#ifndef _ASM_IA64_SN_RW_MMR_H
#define _ASM_IA64_SN_RW_MMR_H
/*
* This file that access MMRs via uncached physical addresses.
* pio_phys_read_mmr - read an MMR
* pio_phys_write_mmr - write an MMR
* pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
* Second MMR will be skipped if address is NULL
*
* Addresses passed to these routines should be uncached physical addresses
* ie., 0x80000....
*/
extern long pio_phys_read_mmr(volatile long *mmr);
extern void pio_phys_write_mmr(volatile long *mmr, long val);
extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2);
#endif /* _ASM_IA64_SN_RW_MMR_H */
arch/ia64/include/asm/sn/shub_mmr.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/include/asm/sn/shubio.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/include/asm/sn/simulator.h
浏览文件 @ cf07cb1f
......@@ -8,7 +8,7 @@
#ifndef _ASM_IA64_SN_SIMULATOR_H
#define _ASM_IA64_SN_SIMULATOR_H
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_UV)
#define SNMAGIC 0xaeeeeeee8badbeefL
#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
......
arch/ia64/include/asm/sn/sn2/sn_hwperf.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
*
* Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
* SGI Altix node and router hardware
*
* Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
*/
#ifndef SN_HWPERF_H
#define SN_HWPERF_H
/*
* object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
* return an array of these. Do not change this without also
* changing the corresponding SAL code.
*/
#define SN_HWPERF_MAXSTRING 128
struct sn_hwperf_object_info {
u32 id;
union {
struct {
u64 this_part:1;
u64 is_shared:1;
} fields;
struct {
u64 flags;
u64 reserved;
} b;
} f;
char name[SN_HWPERF_MAXSTRING];
char location[SN_HWPERF_MAXSTRING];
u32 ports;
};
#define sn_hwp_this_part f.fields.this_part
#define sn_hwp_is_shared f.fields.is_shared
#define sn_hwp_flags f.b.flags
/* macros for object classification */
#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub"))
#define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2."))
#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO"))
#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router"))
#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router"))
#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router"))
#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \
SN_HWPERF_IS_NL4ROUTER(x) || \
SN_HWPERF_IS_OLDROUTER(x))
#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
(SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
(SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
struct sn_hwperf_port_info {
u32 port;
u32 conn_id;
u32 conn_port;
};
/* for HWPERF_{GET,SET}_MMRS */
struct sn_hwperf_data {
u64 addr;
u64 data;
};
/* user ioctl() argument, see below */
struct sn_hwperf_ioctl_args {
u64 arg; /* argument, usually an object id */
u64 sz; /* size of transfer */
void *ptr; /* pointer to source/target */
u32 v0; /* second return value */
};
/*
* For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
* sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
* to call SAL, and whether to use an interprocessor interrupt
* or task migration in order to do so. If the CPU specified is
* SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
*/
#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL
#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL
#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL
#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL
/*
* ioctl requests on the "sn_hwperf" misc device that call SAL.
*/
#define SN_HWPERF_OP_MEM_COPYIN 0x1000
#define SN_HWPERF_OP_MEM_COPYOUT 0x2000
#define SN_HWPERF_OP_MASK 0x0fff
/*
* Determine mem requirement.
* arg don't care
* sz 8
* p pointer to u64 integer
*/
#define SN_HWPERF_GET_HEAPSIZE 1
/*
* Install mem for SAL drvr
* arg don't care
* sz sizeof buffer pointed to by p
* p pointer to buffer for scratch area
*/
#define SN_HWPERF_INSTALL_HEAP 2
/*
* Determine number of objects
* arg don't care
* sz 8
* p pointer to u64 integer
*/
#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT)
/*
* Determine object "distance", relative to a cpu. This operation can
* execute on a designated logical cpu number, using either an IPI or
* via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
* the current CPU is used. See the SN_HWPERF_ARG_* macros above.
*
* arg bitmap of IPI flag, cpu number and object id
* sz 8
* p pointer to u64 integer
*/
#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT)
/*
* Enumerate objects. Special case if sz == 8, returns the required
* buffer size.
* arg don't care
* sz sizeof buffer pointed to by p
* p pointer to array of struct sn_hwperf_object_info
*/
#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT)
/*
* Enumerate NumaLink ports for an object. Special case if sz == 8,
* returns the required buffer size.
* arg object id
* sz sizeof buffer pointed to by p
* p pointer to array of struct sn_hwperf_port_info
*/
#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT)
/*
* SET/GET memory mapped registers. These operations can execute
* on a designated logical cpu number, using either an IPI or via
* task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
* the current CPU is used. See the SN_HWPERF_ARG_* macros above.
*
* arg bitmap of ipi flag, cpu number and object id
* sz sizeof buffer pointed to by p
* p pointer to array of struct sn_hwperf_data
*/
#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN)
#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \
SN_HWPERF_OP_MEM_COPYIN)
/*
* Lock a shared object
* arg object id
* sz don't care
* p don't care
*/
#define SN_HWPERF_ACQUIRE 16
/*
* Unlock a shared object
* arg object id
* sz don't care
* p don't care
*/
#define SN_HWPERF_RELEASE 17
/*
* Break a lock on a shared object
* arg object id
* sz don't care
* p don't care
*/
#define SN_HWPERF_FORCE_RELEASE 18
/*
* ioctl requests on "sn_hwperf" that do not call SAL
*/
/*
* get cpu info as an array of hwperf_object_info_t.
* id is logical CPU number, name is description, location
* is geoid (e.g. 001c04#1c). Special case if sz == 8,
* returns the required buffer size.
*
* arg don't care
* sz sizeof buffer pointed to by p
* p pointer to array of struct sn_hwperf_object_info
*/
#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT)
/*
* Given an object id, return it's node number (aka cnode).
* arg object id
* sz 8
* p pointer to u64 integer
*/
#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT)
/*
* Given a node number (cnode), return it's nasid.
* arg ordinal node number (aka cnodeid)
* sz 8
* p pointer to u64 integer
*/
#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT)
/*
* Given a node id, determine the id of the nearest node with CPUs
* and the id of the nearest node that has memory. The argument
* node would normally be a "headless" node, e.g. an "IO node".
* Return 0 on success.
*/
extern int sn_hwperf_get_nearest_node(cnodeid_t node,
cnodeid_t *near_mem, cnodeid_t *near_cpu);
/* return codes */
#define SN_HWPERF_OP_OK 0
#define SN_HWPERF_OP_NOMEM 1
#define SN_HWPERF_OP_NO_PERM 2
#define SN_HWPERF_OP_IO_ERROR 3
#define SN_HWPERF_OP_BUSY 4
#define SN_HWPERF_OP_RECONFIGURE 253
#define SN_HWPERF_OP_INVAL 254
int sn_topology_open(struct inode *inode, struct file *file);
int sn_topology_release(struct inode *inode, struct file *file);
#endif /* SN_HWPERF_H */
arch/ia64/include/asm/sn/sn_cpuid.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_SN_CPUID_H
#define _ASM_IA64_SN_SN_CPUID_H
#include <linux/smp.h>
#include <asm/sn/addrs.h>
#include <asm/sn/pda.h>
#include <asm/intrinsics.h>
/*
* Functions for converting between cpuids, nodeids and NASIDs.
*
* These are for SGI platforms only.
*
*/
/*
* Definitions of terms (these definitions are for IA64 ONLY. Other architectures
* use cpuid/cpunum quite defferently):
*
* CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
* the cpu. The value cpuid has no significance on IA64 other than
* the boot cpu is 0.
* smp_processor_id() returns the cpuid of the current cpu.
*
* CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
* This is the same as 31:24 of the processor LID register
* hard_smp_processor_id()- cpu_physical_id of current processor
* cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
* cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid>
* * not real efficient - don't use in perf critical code
*
* SLICE - a number in the range of 0 - 3 (typically) that represents the
* cpu number on a brick.
*
* SUBNODE - (almost obsolete) the number of the FSB that a cpu is
* connected to. This is also the same as the PI number. Usually 0 or 1.
*
* NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no
* significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
*
*
* The macros convert between cpu physical ids & slice/nasid/cnodeid.
* These terms are described below:
*
*
* Brick
* ----- ----- ----- ----- CPU
* | 0 | | 1 | | 0 | | 1 | SLICE
* ----- ----- ----- -----
* | | | |
* | | | |
* 0 | | 2 0 | | 2 FSB SLOT
* ------- -------
* | |
* | |
* | |
* ------------ -------------
* | | | |
* | SHUB | | SHUB | NASID (0..MAX_NASIDS)
* | |----- | | CNODEID (0..num_compact_nodes-1)
* | | | |
* | | | |
* ------------ -------------
* | |
*
*
*/
#define get_node_number(addr) NASID_GET(addr)
/*
* NOTE: on non-MP systems, only cpuid 0 exists
*/
extern short physical_node_map[]; /* indexed by nasid to get cnode */
/*
* Macros for retrieving info about current cpu
*/
#define get_nasid() (sn_nodepda->phys_cpuid[smp_processor_id()].nasid)
#define get_subnode() (sn_nodepda->phys_cpuid[smp_processor_id()].subnode)
#define get_slice() (sn_nodepda->phys_cpuid[smp_processor_id()].slice)
#define get_cnode() (sn_nodepda->phys_cpuid[smp_processor_id()].cnode)
#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
/*
* Macros for retrieving info about an arbitrary cpu
* cpuid - logical cpu id
*/
#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid)
#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode)
#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice)
/*
* Dont use the following in performance critical code. They require scans
* of potentially large tables.
*/
extern int nasid_slice_to_cpuid(int, int);
/*
* cnodeid_to_nasid - convert a cnodeid to a NASID
*/
#define cnodeid_to_nasid(cnodeid) (sn_cnodeid_to_nasid[cnodeid])
/*
* nasid_to_cnodeid - convert a NASID to a cnodeid
*/
#define nasid_to_cnodeid(nasid) (physical_node_map[nasid])
/*
* partition_coherence_id - get the coherence ID of the current partition
*/
extern u8 sn_coherency_id;
#define partition_coherence_id() (sn_coherency_id)
#endif /* _ASM_IA64_SN_SN_CPUID_H */
arch/ia64/include/asm/sn/sn_feature_sets.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
#ifndef _ASM_IA64_SN_FEATURE_SETS_H
#define _ASM_IA64_SN_FEATURE_SETS_H
/*
* SN PROM Features
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved.
*/
/* --------------------- PROM Features -----------------------------*/
extern int sn_prom_feature_available(int id);
#define MAX_PROM_FEATURE_SETS 2
/*
* The following defines features that may or may not be supported by the
* current PROM. The OS uses sn_prom_feature_available(feature) to test for
* the presence of a PROM feature. Down rev (old) PROMs will always test
* "false" for new features.
*
* Use:
* if (sn_prom_feature_available(PRF_XXX))
* ...
*/
#define PRF_PAL_CACHE_FLUSH_SAFE 0
#define PRF_DEVICE_FLUSH_LIST 1
#define PRF_HOTPLUG_SUPPORT 2
#define PRF_CPU_DISABLE_SUPPORT 3
/* --------------------- OS Features -------------------------------*/
/*
* The following defines OS features that are optionally present in
* the operating system.
* During boot, PROM is notified of these features via a series of calls:
*
* ia64_sn_set_os_feature(feature1);
*
* Once enabled, a feature cannot be disabled.
*
* By default, features are disabled unless explicitly enabled.
*
* These defines must be kept in sync with the corresponding
* PROM definitions in feature_sets.h.
*/
#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
#define OSF_FEAT_LOG_SBES 1
#define OSF_ACPI_ENABLE 2
#define OSF_PCISEGMENT_ENABLE 3
#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
arch/ia64/include/asm/sn/sn_sal.h
浏览文件 @ cf07cb1f
此差异已折叠。
arch/ia64/include/asm/sn/tioca.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/include/asm/sn/tioca_provider.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/include/asm/sn/tioce.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/include/asm/sn/tioce_provider.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_CE_PROVIDER_H
#define _ASM_IA64_SN_CE_PROVIDER_H
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce.h>
/*
* Common TIOCE structure shared between the prom and kernel
*
* DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE
* PROM VERSION.
*/
struct tioce_common {
struct pcibus_bussoft ce_pcibus; /* common pciio header */
u32 ce_rev;
u64 ce_kernel_private;
u64 ce_prom_private;
};
struct tioce_kernel {
struct tioce_common *ce_common;
spinlock_t ce_lock;
struct list_head ce_dmamap_list;
u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES];
u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
u32 ce_ate3240_pagesize;
u8 ce_port1_secondary;
/* per-port resources */
struct {
int dirmap_refcnt;
u64 dirmap_shadow;
} ce_port[TIOCE_NUM_PORTS];
};
struct tioce_dmamap {
struct list_head ce_dmamap_list; /* headed by tioce_kernel */
u32 refcnt;
u64 nbytes; /* # bytes mapped */
u64 ct_start; /* coretalk start address */
u64 pci_start; /* bus start address */
u64 __iomem *ate_hw;/* hw ptr of first ate in map */
u64 *ate_shadow; /* shadow ptr of firat ate */
u16 ate_count; /* # ate's in the map */
};
extern int tioce_init_provider(void);
#endif /* __ASM_IA64_SN_CE_PROVIDER_H */
arch/ia64/include/asm/sn/tiocp.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/include/asm/sn/tiocx.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/include/asm/sn/types.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/kernel/acpi.c
浏览文件 @ cf07cb1f
此差异已折叠。
arch/ia64/kernel/irq.c
浏览文件 @ cf07cb1f
此差异已折叠。
arch/ia64/kernel/sal.c
浏览文件 @ cf07cb1f
此差异已折叠。
arch/ia64/kernel/setup.c
浏览文件 @ cf07cb1f
此差异已折叠。
arch/ia64/kernel/smpboot.c
浏览文件 @ cf07cb1f
此差异已折叠。
arch/ia64/kernel/uncached.c
浏览文件 @ cf07cb1f
此差异已折叠。
arch/ia64/sn/Makefile 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/include/ioerror.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/include/tio.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/include/xtalk/hubdev.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/include/xtalk/xbow.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/include/xtalk/xwidgetdev.h 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/Makefile 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/bte.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/bte_error.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/huberror.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/idle.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/io_acpi_init.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/io_common.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/io_init.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/iomv.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/irq.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/klconflib.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/machvec.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/mca.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/msi_sn.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/pio_phys.S 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/setup.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/Makefile 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/cache.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/io.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/prominfo_proc.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/ptc_deadlock.S 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/sn2_smp.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/sn_hwperf.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/sn_proc_fs.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/timer.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/kernel/sn2/timer_interrupt.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/Makefile 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/pci_dma.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/pcibr/Makefile 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/pcibr/pcibr_ate.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/pcibr/pcibr_dma.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/pcibr/pcibr_provider.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/pcibr/pcibr_reg.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/tioca_provider.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/sn/pci/tioce_provider.c 已删除 100644 → 0
浏览文件 @ f7bc6e42
此差异已折叠。
arch/ia64/uv/kernel/setup.c
浏览文件 @ cf07cb1f
此差异已折叠。
drivers/acpi/Kconfig
浏览文件 @ cf07cb1f
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或