提交 cdc65fbe 编写于 作者: M Manuel Lauss 提交者: Mark Brown

ASoC: au1x: PSC-AC97 bugfixes

This patch fixes the following bugs:

- only reprogram bitdepth if it has changed since last call to hw_params.
- add locking inside ac97_read/write functions:
  When reprogramming sample depth, the ac97 unit has to be disabled,
  which should not be done in the middle of codec register accesses.

- retry timed-out codec register accesses.

- wait for status bits to set/clear when starting/stopping various
  functional blocks; very important after reenabling AC97 unit else
  sound may be distorted (e.g. high-pitch noise in 1kHz sine wave).

- clear fifos before/after starting/stopping RX/TX.

- longer timeouts waiting for PSC/AC97 ready after cold reset
  with certain codecs this can take ridiculous amounts of time.

Run-tested on various Au1200 platforms with various codecs.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 87831cb6
/*
* Au12x0/Au1550 PSC ALSA ASoC audio support.
*
* (c) 2007-2008 MSC Vertriebsges.m.b.H.,
* Manuel Lauss <mano@roarinelk.homelinux.net>
* (c) 2007-2009 MSC Vertriebsges.m.b.H.,
* Manuel Lauss <manuel.lauss@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/suspend.h>
#include <sound/core.h>
#include <sound/pcm.h>
......@@ -29,6 +30,9 @@
#include "psc.h"
/* how often to retry failed codec register reads/writes */
#define AC97_RW_RETRIES 5
#define AC97_DIR \
(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
......@@ -45,6 +49,9 @@
#define AC97PCR_CLRFIFO(stype) \
((stype) == PCM_TX ? PSC_AC97PCR_TC : PSC_AC97PCR_RC)
#define AC97STAT_BUSY(stype) \
((stype) == PCM_TX ? PSC_AC97STAT_TB : PSC_AC97STAT_RB)
/* instance data. There can be only one, MacLeod!!!! */
static struct au1xpsc_audio_data *au1xpsc_ac97_workdata;
......@@ -54,24 +61,33 @@ static unsigned short au1xpsc_ac97_read(struct snd_ac97 *ac97,
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
unsigned short data, tmo;
unsigned short data, retry, tmo;
au_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg), AC97_CDC(pscdata));
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
tmo = 1000;
while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)) && --tmo)
udelay(2);
retry = AC97_RW_RETRIES;
do {
mutex_lock(&pscdata->lock);
au_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg),
AC97_CDC(pscdata));
au_sync();
tmo = 2000;
while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
&& --tmo)
udelay(2);
if (!tmo)
data = 0xffff;
else
data = au_readl(AC97_CDC(pscdata)) & 0xffff;
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
mutex_unlock(&pscdata->lock);
} while (--retry && !tmo);
return data;
return retry ? data : 0xffff;
}
/* AC97 controller writes to codec register */
......@@ -80,16 +96,29 @@ static void au1xpsc_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
unsigned int tmo;
unsigned int tmo, retry;
au_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff), AC97_CDC(pscdata));
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
tmo = 1000;
while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)) && --tmo)
retry = AC97_RW_RETRIES;
do {
mutex_lock(&pscdata->lock);
au_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff),
AC97_CDC(pscdata));
au_sync();
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
tmo = 2000;
while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
&& --tmo)
udelay(2);
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
mutex_unlock(&pscdata->lock);
} while (--retry && !tmo);
}
/* AC97 controller asserts a warm reset */
......@@ -129,9 +158,9 @@ static void au1xpsc_ac97_cold_reset(struct snd_ac97 *ac97)
au_sync();
/* wait for PSC to indicate it's ready */
i = 100000;
i = 1000;
while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_SR)) && (--i))
au_sync();
msleep(1);
if (i == 0) {
printk(KERN_ERR "au1xpsc-ac97: PSC not ready!\n");
......@@ -143,9 +172,9 @@ static void au1xpsc_ac97_cold_reset(struct snd_ac97 *ac97)
au_sync();
/* wait for AC97 core to become ready */
i = 100000;
i = 1000;
while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && (--i))
au_sync();
msleep(1);
if (i == 0)
printk(KERN_ERR "au1xpsc-ac97: AC97 ctrl not ready\n");
}
......@@ -165,12 +194,12 @@ static int au1xpsc_ac97_hw_params(struct snd_pcm_substream *substream,
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
unsigned long r, stat;
unsigned long r, ro, stat;
int chans, stype = SUBSTREAM_TYPE(substream);
chans = params_channels(params);
r = au_readl(AC97_CFG(pscdata));
r = ro = au_readl(AC97_CFG(pscdata));
stat = au_readl(AC97_STAT(pscdata));
/* already active? */
......@@ -180,9 +209,6 @@ static int au1xpsc_ac97_hw_params(struct snd_pcm_substream *substream,
(pscdata->rate != params_rate(params)))
return -EINVAL;
} else {
/* disable AC97 device controller first */
au_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
au_sync();
/* set sample bitdepth: REG[24:21]=(BITS-2)/2 */
r &= ~PSC_AC97CFG_LEN_MASK;
......@@ -199,14 +225,40 @@ static int au1xpsc_ac97_hw_params(struct snd_pcm_substream *substream,
r |= PSC_AC97CFG_RXSLOT_ENA(4);
}
/* finally enable the AC97 controller again */
/* do we need to poke the hardware? */
if (!(r ^ ro))
goto out;
/* ac97 engine is about to be disabled */
mutex_lock(&pscdata->lock);
/* disable AC97 device controller first... */
au_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
au_sync();
/* ...wait for it... */
while (au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)
asm volatile ("nop");
/* ...write config... */
au_writel(r, AC97_CFG(pscdata));
au_sync();
/* ...enable the AC97 controller again... */
au_writel(r | PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
au_sync();
/* ...and wait for ready bit */
while (!(au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR))
asm volatile ("nop");
mutex_unlock(&pscdata->lock);
pscdata->cfg = r;
pscdata->rate = params_rate(params);
}
out:
return 0;
}
......@@ -222,6 +274,8 @@ static int au1xpsc_ac97_trigger(struct snd_pcm_substream *substream,
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
au_sync();
au_writel(AC97PCR_START(stype), AC97_PCR(pscdata));
au_sync();
break;
......@@ -229,6 +283,13 @@ static int au1xpsc_ac97_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_SUSPEND:
au_writel(AC97PCR_STOP(stype), AC97_PCR(pscdata));
au_sync();
while (au_readl(AC97_STAT(pscdata)) & AC97STAT_BUSY(stype))
asm volatile ("nop");
au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
au_sync();
break;
default:
ret = -EINVAL;
......@@ -251,6 +312,8 @@ static int au1xpsc_ac97_probe(struct platform_device *pdev,
if (!au1xpsc_ac97_workdata)
return -ENOMEM;
mutex_init(&au1xpsc_ac97_workdata->lock);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
ret = -ENODEV;
......@@ -269,9 +332,9 @@ static int au1xpsc_ac97_probe(struct platform_device *pdev,
goto out1;
/* configuration: max dma trigger threshold, enable ac97 */
au1xpsc_ac97_workdata->cfg = PSC_AC97CFG_RT_FIFO8 |
PSC_AC97CFG_TT_FIFO8 |
PSC_AC97CFG_DE_ENABLE;
au1xpsc_ac97_workdata->cfg = PSC_AC97CFG_RT_FIFO8 |
PSC_AC97CFG_TT_FIFO8 |
PSC_AC97CFG_DE_ENABLE;
/* preserve PSC clock source set up by platform (dev.platform_data
* is already occupied by soc layer)
......@@ -386,4 +449,4 @@ module_exit(au1xpsc_ac97_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Au12x0/Au1550 PSC AC97 ALSA ASoC audio driver");
MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
......@@ -29,6 +29,7 @@ struct au1xpsc_audio_data {
unsigned long pm[2];
struct resource *ioarea;
struct mutex lock;
};
#define PCM_TX 0
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册