提交 cc726268 编写于 作者: L Lorenzo Bianconi 提交者: Felix Fietkau

mt76: move mt76x02_bss_info_changed in mt76x02-lib module

Unify drv_bss_info_changed mac80211 callback and remove duplicated
code in mt76x0 and mt76x2 drivers
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
上级 317ed42b
......@@ -71,52 +71,3 @@ int mt76x0_config(struct ieee80211_hw *hw, u32 changed)
return ret;
}
EXPORT_SYMBOL_GPL(mt76x0_config);
void mt76x0_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info, u32 changed)
{
struct mt76x02_vif *mvif = (struct mt76x02_vif *)vif->drv_priv;
struct mt76x02_dev *dev = hw->priv;
mutex_lock(&dev->mt76.mutex);
if (changed & BSS_CHANGED_BSSID)
mt76x02_mac_set_bssid(dev, mvif->idx, info->bssid);
if (changed & BSS_CHANGED_BEACON_ENABLED) {
tasklet_disable(&dev->pre_tbtt_tasklet);
mt76x02_mac_set_beacon_enable(dev, mvif->idx,
info->enable_beacon);
tasklet_enable(&dev->pre_tbtt_tasklet);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
mt76_wr(dev, MT_LEGACY_BASIC_RATE, info->basic_rates);
mt76_wr(dev, MT_VHT_HT_FBK_CFG0, 0x65432100);
mt76_wr(dev, MT_VHT_HT_FBK_CFG1, 0xedcba980);
mt76_wr(dev, MT_LG_FBK_CFG0, 0xedcba988);
mt76_wr(dev, MT_LG_FBK_CFG1, 0x00002100);
}
if (changed & BSS_CHANGED_BEACON_INT) {
mt76_rmw_field(dev, MT_BEACON_TIME_CFG,
MT_BEACON_TIME_CFG_INTVAL,
info->beacon_int << 4);
dev->beacon_int = info->beacon_int;
dev->tbtt_count = 0;
}
if (changed & BSS_CHANGED_ERP_PREAMBLE)
mt76x02_mac_set_short_preamble(dev, info->use_short_preamble);
if (changed & BSS_CHANGED_ERP_SLOT) {
int slottime = info->use_short_slot ? 9 : 20;
dev->slottime = slottime;
mt76x02_set_tx_ackto(dev);
}
mutex_unlock(&dev->mt76.mutex);
}
EXPORT_SYMBOL_GPL(mt76x0_bss_info_changed);
......@@ -62,9 +62,6 @@ int mt76x0_mac_start(struct mt76x02_dev *dev);
void mt76x0_mac_stop(struct mt76x02_dev *dev);
int mt76x0_config(struct ieee80211_hw *hw, u32 changed);
void mt76x0_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info, u32 changed);
/* PHY */
void mt76x0_phy_init(struct mt76x02_dev *dev);
......
......@@ -89,7 +89,7 @@ static const struct ieee80211_ops mt76x0e_ops = {
.remove_interface = mt76x02_remove_interface,
.config = mt76x0_config,
.configure_filter = mt76x02_configure_filter,
.bss_info_changed = mt76x0_bss_info_changed,
.bss_info_changed = mt76x02_bss_info_changed,
.sta_add = mt76x02_sta_add,
.sta_remove = mt76x02_sta_remove,
.set_key = mt76x02_set_key,
......
......@@ -145,7 +145,7 @@ static const struct ieee80211_ops mt76x0u_ops = {
.remove_interface = mt76x02_remove_interface,
.config = mt76x0_config,
.configure_filter = mt76x02_configure_filter,
.bss_info_changed = mt76x0_bss_info_changed,
.bss_info_changed = mt76x02_bss_info_changed,
.sta_add = mt76x02_sta_add,
.sta_remove = mt76x02_sta_remove,
.set_key = mt76x02_set_key,
......
......@@ -158,6 +158,9 @@ void mt76x02_sw_scan_complete(struct ieee80211_hw *hw,
int mt76x02_get_txpower(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, int *dbm);
void mt76x02_sta_ps(struct mt76_dev *dev, struct ieee80211_sta *sta, bool ps);
void mt76x02_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info, u32 changed);
extern const u16 mt76x02_beacon_offsets[16];
void mt76x02_init_beacon_config(struct mt76x02_dev *dev);
......
......@@ -647,4 +647,46 @@ void mt76x02_init_beacon_config(struct mt76x02_dev *dev)
}
EXPORT_SYMBOL_GPL(mt76x02_init_beacon_config);
void mt76x02_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
u32 changed)
{
struct mt76x02_vif *mvif = (struct mt76x02_vif *)vif->drv_priv;
struct mt76x02_dev *dev = hw->priv;
mutex_lock(&dev->mt76.mutex);
if (changed & BSS_CHANGED_BSSID)
mt76x02_mac_set_bssid(dev, mvif->idx, info->bssid);
if (changed & BSS_CHANGED_BEACON_ENABLED) {
tasklet_disable(&dev->pre_tbtt_tasklet);
mt76x02_mac_set_beacon_enable(dev, mvif->idx,
info->enable_beacon);
tasklet_enable(&dev->pre_tbtt_tasklet);
}
if (changed & BSS_CHANGED_BEACON_INT) {
mt76_rmw_field(dev, MT_BEACON_TIME_CFG,
MT_BEACON_TIME_CFG_INTVAL,
info->beacon_int << 4);
dev->beacon_int = info->beacon_int;
dev->tbtt_count = 0;
}
if (changed & BSS_CHANGED_ERP_PREAMBLE)
mt76x02_mac_set_short_preamble(dev, info->use_short_preamble);
if (changed & BSS_CHANGED_ERP_SLOT) {
int slottime = info->use_short_slot ? 9 : 20;
dev->slottime = slottime;
mt76x02_set_tx_ackto(dev);
}
mutex_unlock(&dev->mt76.mutex);
}
EXPORT_SYMBOL_GPL(mt76x02_bss_info_changed);
MODULE_LICENSE("Dual BSD/GPL");
......@@ -127,43 +127,6 @@ mt76x2_config(struct ieee80211_hw *hw, u32 changed)
return ret;
}
static void
mt76x2_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info, u32 changed)
{
struct mt76x02_dev *dev = hw->priv;
struct mt76x02_vif *mvif = (struct mt76x02_vif *) vif->drv_priv;
mutex_lock(&dev->mt76.mutex);
if (changed & BSS_CHANGED_BSSID)
mt76x02_mac_set_bssid(dev, mvif->idx, info->bssid);
if (changed & BSS_CHANGED_BEACON_INT) {
mt76_rmw_field(dev, MT_BEACON_TIME_CFG,
MT_BEACON_TIME_CFG_INTVAL,
info->beacon_int << 4);
dev->beacon_int = info->beacon_int;
dev->tbtt_count = 0;
}
if (changed & BSS_CHANGED_BEACON_ENABLED) {
tasklet_disable(&dev->pre_tbtt_tasklet);
mt76x02_mac_set_beacon_enable(dev, mvif->idx,
info->enable_beacon);
tasklet_enable(&dev->pre_tbtt_tasklet);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
int slottime = info->use_short_slot ? 9 : 20;
dev->slottime = slottime;
mt76x02_set_tx_ackto(dev);
}
mutex_unlock(&dev->mt76.mutex);
}
static void
mt76x2_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u32 queues, bool drop)
......@@ -218,7 +181,7 @@ const struct ieee80211_ops mt76x2_ops = {
.remove_interface = mt76x02_remove_interface,
.config = mt76x2_config,
.configure_filter = mt76x02_configure_filter,
.bss_info_changed = mt76x2_bss_info_changed,
.bss_info_changed = mt76x02_bss_info_changed,
.sta_add = mt76x02_sta_add,
.sta_remove = mt76x02_sta_remove,
.set_key = mt76x02_set_key,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册