net: macb: convert to phylink_generic_validate()

Populate the supported interfaces bitmap and MAC capabilities mask for
the macb driver and remove the old validate implementation.
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mpuRv-00D4rb-Lz@rmk-PC.armlinux.org.ukSigned-off-by: NJakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/cadence/macb_main.c

@@ -506,108 +506,6 @@ static void macb_set_tx_clk(struct macb *bp, int speed)
 		netdev_err(bp->dev, "adjusting tx_clk failed.\n");
 }
 
-static void macb_validate(struct phylink_config *config,
-			  unsigned long *supported,
-			  struct phylink_link_state *state)
-{
-	struct net_device *ndev = to_net_dev(config->dev);
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-	struct macb *bp = netdev_priv(ndev);
-	bool have_1g=false, have_sgmii=false, have_10g=false;
-
-	/* Determine what modes are supported */
-	if (macb_is_gem(bp) &&
-	    (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE)) {
-		have_1g = true;
-		if (bp->caps & MACB_CAPS_PCS)
-			have_sgmii = true;
-		if (bp->caps & MACB_CAPS_HIGH_SPEED)
-			have_10g = true;
-	}
-
-	/* Eliminate unsupported modes */
-	switch (state->interface) {
-	case PHY_INTERFACE_MODE_NA:
-	case PHY_INTERFACE_MODE_MII:
-	case PHY_INTERFACE_MODE_RMII:
-		break;
-
-	case PHY_INTERFACE_MODE_GMII:
-	case PHY_INTERFACE_MODE_RGMII:
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		if (have_1g)
-			break;
-		linkmode_zero(supported);
-		return;
-
-	case PHY_INTERFACE_MODE_SGMII:
-		if (have_sgmii)
-			break;
-		linkmode_zero(supported);
-		return;
-
-	case PHY_INTERFACE_MODE_10GBASER:
-		if (have_10g)
-			break;
-		fallthrough;
-
-	default:
-		linkmode_zero(supported);
-		return;
-	}
-
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Autoneg);
-	phylink_set(mask, Asym_Pause);
-
-	/* And set the appropriate mask */
-	switch (state->interface) {
-	case PHY_INTERFACE_MODE_NA:
-	case PHY_INTERFACE_MODE_10GBASER:
-		if (have_10g) {
-			phylink_set_10g_modes(mask);
-			phylink_set(mask, 10000baseKR_Full);
-		}
-		if (state->interface != PHY_INTERFACE_MODE_NA)
-			break;
-		fallthrough;
-
-	/* FIXME: Do we actually support 10/100 for SGMII? Half duplex? */
-	case PHY_INTERFACE_MODE_SGMII:
-		if (!have_sgmii && state->interface != PHY_INTERFACE_MODE_NA)
-			break;
-		fallthrough;
-
-	case PHY_INTERFACE_MODE_GMII:
-	case PHY_INTERFACE_MODE_RGMII:
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		if (have_1g) {
-			phylink_set(mask, 1000baseT_Full);
-			phylink_set(mask, 1000baseX_Full);
-
-			if (!(bp->caps & MACB_CAPS_NO_GIGABIT_HALF))
-				phylink_set(mask, 1000baseT_Half);
-		} else if (state->interface != PHY_INTERFACE_MODE_NA) {
-			break;
-		}
-		fallthrough;
-
-	default:
-		phylink_set(mask, 10baseT_Half);
-		phylink_set(mask, 10baseT_Full);
-		phylink_set(mask, 100baseT_Half);
-		phylink_set(mask, 100baseT_Full);
-		break;
-	}
-
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
-}
-
 static void macb_usx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
 				 phy_interface_t interface, int speed,
 				 int duplex)
@@ -849,7 +747,7 @@ static int macb_mac_prepare(struct phylink_config *config, unsigned int mode,
 }
 
 static const struct phylink_mac_ops macb_phylink_ops = {
-	.validate = macb_validate,
+	.validate = phylink_generic_validate,
 	.mac_prepare = macb_mac_prepare,
 	.mac_config = macb_mac_config,
 	.mac_link_down = macb_mac_link_down,
@@ -916,6 +814,35 @@ static int macb_mii_probe(struct net_device *dev)
 		bp->phylink_config.get_fixed_state = macb_get_pcs_fixed_state;
 	}
 
+	bp->phylink_config.mac_capabilities = MAC_ASYM_PAUSE |
+		MAC_10 | MAC_100;
+
+	__set_bit(PHY_INTERFACE_MODE_MII,
+		  bp->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_RMII,
+		  bp->phylink_config.supported_interfaces);
+
+	/* Determine what modes are supported */
+	if (macb_is_gem(bp) && (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE)) {
+		bp->phylink_config.mac_capabilities |= MAC_1000FD;
+		if (!(bp->caps & MACB_CAPS_NO_GIGABIT_HALF))
+			bp->phylink_config.mac_capabilities |= MAC_1000HD;
+
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  bp->phylink_config.supported_interfaces);
+		phy_interface_set_rgmii(bp->phylink_config.supported_interfaces);
+
+		if (bp->caps & MACB_CAPS_PCS)
+			__set_bit(PHY_INTERFACE_MODE_SGMII,
+				  bp->phylink_config.supported_interfaces);
+
+		if (bp->caps & MACB_CAPS_HIGH_SPEED) {
+			__set_bit(PHY_INTERFACE_MODE_10GBASER,
+				  bp->phylink_config.supported_interfaces);
+			bp->phylink_config.mac_capabilities |= MAC_10000FD;
+		}
+	}
+
 	bp->phylink = phylink_create(&bp->phylink_config, bp->pdev->dev.fwnode,
 				     bp->phy_interface, &macb_phylink_ops);
 	if (IS_ERR(bp->phylink)) {