bonding: change AD_LINK_SPEED_BITMASK to enum to suport more speed

Port Key was determined as 16 bits according to the link speed,
duplex and user key (which is yet not supported).  In the old
speed field, 5 bits are for speed [1|10|100|1000|10000]Mbps as
below:
--------------------------------------------------------------
Port key :| User key        | Speed         |       Duplex|
--------------------------------------------------------------
    16                  6               1               0
This patch keeps the old layout, but changes AD_LINK_SPEED_BITMASK
from bit type to an enum type.  In this way, the speed field can
expand speed type from 5 to 32.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: NJianhua Xie <jianhua.xie@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_3ad.c

@@ -79,15 +79,17 @@
  * --------------------------------------------------------------
  * 16		  6		  1		  0
  */
-#define  AD_DUPLEX_KEY_BITS    0x1
-#define  AD_SPEED_KEY_BITS     0x3E
-#define  AD_USER_KEY_BITS      0xFFC0
-
-#define     AD_LINK_SPEED_BITMASK_1MBPS       0x1
-#define     AD_LINK_SPEED_BITMASK_10MBPS      0x2
-#define     AD_LINK_SPEED_BITMASK_100MBPS     0x4
-#define     AD_LINK_SPEED_BITMASK_1000MBPS    0x8
-#define     AD_LINK_SPEED_BITMASK_10000MBPS   0x10
+#define  AD_DUPLEX_KEY_MASKS    0x1
+#define  AD_SPEED_KEY_MASKS     0x3E
+#define  AD_USER_KEY_MASKS      0xFFC0
+
+enum ad_link_speed_type {
+	AD_LINK_SPEED_1MBPS = 1,
+	AD_LINK_SPEED_10MBPS,
+	AD_LINK_SPEED_100MBPS,
+	AD_LINK_SPEED_1000MBPS,
+	AD_LINK_SPEED_10000MBPS
+};
 
 /* compare MAC addresses */
 #define MAC_ADDRESS_EQUAL(A, B)	\
@@ -240,12 +242,12 @@ static inline int __check_agg_selection_timer(struct port *port)
  * __get_link_speed - get a port's speed
  * @port: the port we're looking at
  *
- * Return @port's speed in 802.3ad bitmask format. i.e. one of:
+ * Return @port's speed in 802.3ad enum format. i.e. one of:
  *     0,
- *     %AD_LINK_SPEED_BITMASK_10MBPS,
- *     %AD_LINK_SPEED_BITMASK_100MBPS,
- *     %AD_LINK_SPEED_BITMASK_1000MBPS,
- *     %AD_LINK_SPEED_BITMASK_10000MBPS
+ *     %AD_LINK_SPEED_10MBPS,
+ *     %AD_LINK_SPEED_100MBPS,
+ *     %AD_LINK_SPEED_1000MBPS,
+ *     %AD_LINK_SPEED_10000MBPS
  */
 static u16 __get_link_speed(struct port *port)
 {
@@ -262,19 +264,19 @@ static u16 __get_link_speed(struct port *port)
 	else {
 		switch (slave->speed) {
 		case SPEED_10:
-			speed = AD_LINK_SPEED_BITMASK_10MBPS;
+			speed = AD_LINK_SPEED_10MBPS;
 			break;
 
 		case SPEED_100:
-			speed = AD_LINK_SPEED_BITMASK_100MBPS;
+			speed = AD_LINK_SPEED_100MBPS;
 			break;
 
 		case SPEED_1000:
-			speed = AD_LINK_SPEED_BITMASK_1000MBPS;
+			speed = AD_LINK_SPEED_1000MBPS;
 			break;
 
 		case SPEED_10000:
-			speed = AD_LINK_SPEED_BITMASK_10000MBPS;
+			speed = AD_LINK_SPEED_10000MBPS;
 			break;
 
 		default:
@@ -625,19 +627,19 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator)
 
 	if (aggregator->num_of_ports) {
 		switch (__get_link_speed(aggregator->lag_ports)) {
-		case AD_LINK_SPEED_BITMASK_1MBPS:
+		case AD_LINK_SPEED_1MBPS:
 			bandwidth = aggregator->num_of_ports;
 			break;
-		case AD_LINK_SPEED_BITMASK_10MBPS:
+		case AD_LINK_SPEED_10MBPS:
 			bandwidth = aggregator->num_of_ports * 10;
 			break;
-		case AD_LINK_SPEED_BITMASK_100MBPS:
+		case AD_LINK_SPEED_100MBPS:
 			bandwidth = aggregator->num_of_ports * 100;
 			break;
-		case AD_LINK_SPEED_BITMASK_1000MBPS:
+		case AD_LINK_SPEED_1000MBPS:
 			bandwidth = aggregator->num_of_ports * 1000;
 			break;
-		case AD_LINK_SPEED_BITMASK_10000MBPS:
+		case AD_LINK_SPEED_10000MBPS:
 			bandwidth = aggregator->num_of_ports * 10000;
 			break;
 		default:
@@ -1011,7 +1013,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
 			 port->sm_rx_state);
 		switch (port->sm_rx_state) {
 		case AD_RX_INITIALIZE:
-			if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS))
+			if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS))
 				port->sm_vars &= ~AD_PORT_LACP_ENABLED;
 			else
 				port->sm_vars |= AD_PORT_LACP_ENABLED;
@@ -1318,7 +1320,7 @@ static void ad_port_selection_logic(struct port *port, bool *update_slave_arr)
 			/* update the new aggregator's parameters
 			 * if port was responsed from the end-user
 			 */
-			if (port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)
+			if (port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS)
 				/* if port is full duplex */
 				port->aggregator->is_individual = false;
 			else
@@ -1846,7 +1848,7 @@ void bond_3ad_bind_slave(struct slave *slave)
 		/* if the port is not full duplex, then the port should be not
 		 * lacp Enabled
 		 */
-		if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS))
+		if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS))
 			port->sm_vars &= ~AD_PORT_LACP_ENABLED;
 		/* actor system is the bond's system */
 		port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr;
@@ -2214,7 +2216,7 @@ void bond_3ad_adapter_speed_changed(struct slave *slave)
 
 	spin_lock_bh(&slave->bond->mode_lock);
 
-	port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS;
+	port->actor_admin_port_key &= ~AD_SPEED_KEY_MASKS;
 	port->actor_oper_port_key = port->actor_admin_port_key |=
 		(__get_link_speed(port) << 1);
 	netdev_dbg(slave->bond->dev, "Port %d changed speed\n", port->actor_port_number);
@@ -2247,7 +2249,7 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave)
 
 	spin_lock_bh(&slave->bond->mode_lock);
 
-	port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
+	port->actor_admin_port_key &= ~AD_DUPLEX_KEY_MASKS;
 	port->actor_oper_port_key = port->actor_admin_port_key |=
 		__get_duplex(port);
 	netdev_dbg(slave->bond->dev, "Port %d changed duplex\n", port->actor_port_number);
@@ -2289,18 +2291,18 @@ void bond_3ad_handle_link_change(struct slave *slave, char link)
 	 */
 	if (link == BOND_LINK_UP) {
 		port->is_enabled = true;
-		port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
+		port->actor_admin_port_key &= ~AD_DUPLEX_KEY_MASKS;
 		port->actor_oper_port_key = port->actor_admin_port_key |=
 			__get_duplex(port);
-		port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS;
+		port->actor_admin_port_key &= ~AD_SPEED_KEY_MASKS;
 		port->actor_oper_port_key = port->actor_admin_port_key |=
 			(__get_link_speed(port) << 1);
 	} else {
 		/* link has failed */
 		port->is_enabled = false;
-		port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
+		port->actor_admin_port_key &= ~AD_DUPLEX_KEY_MASKS;
 		port->actor_oper_port_key = (port->actor_admin_port_key &=
-					     ~AD_SPEED_KEY_BITS);
+					     ~AD_SPEED_KEY_MASKS);
 	}
 	netdev_dbg(slave->bond->dev, "Port %d changed link status to %s\n",
 		   port->actor_port_number,