提交 c96e731c 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: bcmgenet: connect and disconnect from the PHY state machine

phy_disconnect() is the only way to guarantee that we are not going to
schedule more work on the PHY state machine workqueue for that
particular PHY device.

This fixes an issue where a network interface was suspended prior to a
system suspend/resume cycle and would then be resumed as part of
mdio_bus_resume(), since the GENET interface clocks would have been
disabled, this basically resulted in bus errors to appear since we are
invoking the GENET driver adjust_link() callback.

Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 93ecd260
......@@ -2140,6 +2140,9 @@ static int bcmgenet_open(struct net_device *dev)
goto err_irq0;
}
phy_connect_direct(dev, priv->phydev, bcmgenet_mii_setup,
priv->phy_interface);
bcmgenet_netif_start(dev);
return 0;
......@@ -2184,6 +2187,9 @@ static int bcmgenet_close(struct net_device *dev)
bcmgenet_netif_stop(dev);
/* Really kill the PHY state machine and disconnect from it */
phy_disconnect(priv->phydev);
/* Disable MAC receive */
umac_enable_set(priv, CMD_RX_EN, false);
......
......@@ -620,6 +620,7 @@ int bcmgenet_mii_init(struct net_device *dev);
int bcmgenet_mii_config(struct net_device *dev);
void bcmgenet_mii_exit(struct net_device *dev);
void bcmgenet_mii_reset(struct net_device *dev);
void bcmgenet_mii_setup(struct net_device *dev);
/* Wake-on-LAN routines */
void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol);
......
......@@ -77,7 +77,7 @@ static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id,
/* setup netdev link state when PHY link status change and
* update UMAC and RGMII block when link up
*/
static void bcmgenet_mii_setup(struct net_device *dev)
void bcmgenet_mii_setup(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册