Merge tag 'sunxi-dt-for-3.13' of https://github.com/mripard/linux into next/dt

From Maxime Ripard:
Allwinner sunXi SoCs device tree changes for 3.13

This DT series sees the introduction of the cubietruck DT, plus the addition of
the i2c controller for the A20 based boards, and of the Security ID found in
all the Allwinner SoCs but the A31.

* tag 'sunxi-dt-for-3.13' of https://github.com/mripard/linux:
  ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck
  ARM: sun7i: olinuxino-micro: Enable the I2C controllers
  ARM: sun7i: cubieboard2: Enable the I2C controllers
  ARM: sun7i: Add the pin muxing options for the I2C controllers
  ARM: sun7i: Enable the I2C controllers
  ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -251,6 +251,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun5i-a13-olinuxino.dtb \
 	sun6i-a31-colombus.dtb \
 	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -266,6 +266,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -255,6 +255,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -222,6 +222,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -48,6 +48,18 @@
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		pinctrl@01c20800 {
+			led_pins_cubietruck: led_pins@0 {
+				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubietruck>;
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 0>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 0>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 0>;
+		};
+	};
+};

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -60,6 +60,24 @@
 			pinctrl-0 = <&uart7_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -215,6 +215,27 @@
 				allwinner,pull = <0>;
 			};
 
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			emac_pins_a: emac0@0 {
 				allwinner,pins = "PA0", "PA1", "PA2",
 						"PA3", "PA4", "PA5", "PA6",
@@ -244,6 +265,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -324,6 +350,51 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <0 7 1>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <0 8 1>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <0 9 1>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <0 88 1>;
+			clocks = <&apb1_gates 3>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@01c2bc00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <0 89 1>;
+			clocks = <&apb1_gates 15>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,