提交 c8b229de 编写于 作者: J Joern Engel

[MTD] Merge STMicro NOR_ECC code with Intel Sibley code

In 2002, STMicro started producing NOR flashes with internal ECC protection
for small blocks (8 or 16 bytes).  Support for those flashes was added by me.
In 2005, Intel Sibley flashes copied this strategy and Nico added support for
those.  Merge the code for both.
Signed-off-by: NJoern Engel <joern@wh.fh-wedel.de>
上级 28318776
......@@ -239,8 +239,8 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
mtd->suspend = cfi_staa_suspend;
mtd->resume = cfi_staa_resume;
mtd->flags = MTD_CAP_NORFLASH;
mtd->flags |= MTD_ECC; /* FIXME: Not all STMicro flashes have this */
mtd->eccsize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
mtd->flags |= MTD_PROGRAM_REGIONS; /* FIXME: Not all STMicro flashes have this */
mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
map->fldrv = &cfi_staa_chipdrv;
__module_get(THIS_MODULE);
mtd->name = map->name;
......
......@@ -664,13 +664,6 @@ static int jffs2_flash_setup(struct jffs2_sb_info *c) {
return ret;
}
/* add setups for other bizarre flashes here... */
if (jffs2_nor_ecc(c)) {
ret = jffs2_nor_ecc_flash_setup(c);
if (ret)
return ret;
}
/* and Dataflash */
if (jffs2_dataflash(c)) {
ret = jffs2_dataflash_setup(c);
......@@ -694,11 +687,6 @@ void jffs2_flash_cleanup(struct jffs2_sb_info *c) {
jffs2_nand_flash_cleanup(c);
}
/* add cleanups for other bizarre flashes here... */
if (jffs2_nor_ecc(c)) {
jffs2_nor_ecc_flash_cleanup(c);
}
/* and DataFlash */
if (jffs2_dataflash(c)) {
jffs2_dataflash_cleanup(c);
......
......@@ -92,11 +92,7 @@ static inline void jffs2_init_inode_info(struct jffs2_inode_info *f)
#define jffs2_flash_writev(a,b,c,d,e,f) jffs2_flash_direct_writev(a,b,c,d,e)
#define jffs2_wbuf_timeout NULL
#define jffs2_wbuf_process NULL
#define jffs2_nor_ecc(c) (0)
#define jffs2_dataflash(c) (0)
#define jffs2_nor_wbuf_flash(c) (0)
#define jffs2_nor_ecc_flash_setup(c) (0)
#define jffs2_nor_ecc_flash_cleanup(c) do {} while (0)
#define jffs2_dataflash_setup(c) (0)
#define jffs2_dataflash_cleanup(c) do {} while (0)
#define jffs2_nor_wbuf_flash_setup(c) (0)
......@@ -110,7 +106,7 @@ static inline void jffs2_init_inode_info(struct jffs2_inode_info *f)
#define jffs2_can_mark_obsolete(c) (0)
#else
#define jffs2_can_mark_obsolete(c) \
((c->mtd->type == MTD_NORFLASH && !(c->mtd->flags & (MTD_ECC|MTD_PROGRAM_REGIONS))) || \
((c->mtd->type == MTD_NORFLASH && !(c->mtd->flags & (MTD_PROGRAM_REGIONS))) || \
c->mtd->type == MTD_RAM)
#endif
......@@ -135,10 +131,6 @@ int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c);
int jffs2_nand_flash_setup(struct jffs2_sb_info *c);
void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c);
#define jffs2_nor_ecc(c) (c->mtd->type == MTD_NORFLASH && (c->mtd->flags & MTD_ECC))
int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c);
void jffs2_nor_ecc_flash_cleanup(struct jffs2_sb_info *c);
#define jffs2_dataflash(c) (c->mtd->type == MTD_DATAFLASH)
int jffs2_dataflash_setup(struct jffs2_sb_info *c);
void jffs2_dataflash_cleanup(struct jffs2_sb_info *c);
......
......@@ -637,17 +637,6 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
memset(c->wbuf,0xff,c->wbuf_pagesize);
}
/* Fixup the wbuf if we are moving to a new eraseblock. The checks below
fail for ECC'd NOR because cleanmarker == 16, so a block starts at
xxx0010. */
if (jffs2_nor_ecc(c)) {
if (((c->wbuf_ofs % c->sector_size) == 0) && !c->wbuf_len) {
c->wbuf_ofs = PAGE_DIV(to);
c->wbuf_len = PAGE_MOD(to);
memset(c->wbuf,0xff,c->wbuf_pagesize);
}
}
/* Sanity checks on target address.
It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs),
and it's permitted to write at the beginning of a new
......@@ -1244,29 +1233,10 @@ void jffs2_dataflash_cleanup(struct jffs2_sb_info *c) {
kfree(c->wbuf);
}
int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c) {
/* Cleanmarker is actually larger on the flashes */
c->cleanmarker_size = 16;
/* Initialize write buffer */
init_rwsem(&c->wbuf_sem);
c->wbuf_pagesize = c->mtd->eccsize;
c->wbuf_ofs = 0xFFFFFFFF;
c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
if (!c->wbuf)
return -ENOMEM;
return 0;
}
void jffs2_nor_ecc_flash_cleanup(struct jffs2_sb_info *c) {
kfree(c->wbuf);
}
int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c) {
/* Cleanmarker currently occupies a whole programming region */
c->cleanmarker_size = c->mtd->writesize;
/* Cleanmarker currently occupies whole programming regions,
* either one or 2 for 8Byte STMicro flashes. */
c->cleanmarker_size = max(16u, c->mtd->writesize);
/* Initialize write buffer */
init_rwsem(&c->wbuf_sem);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册