habanalabs: update firmware definitions

Add comments for the various errors and states of the firmware during boot.
Add a mapping of a new register that will tell the driver whether the
firmware executed the request from the driver or if it has encountered an
error.
Add a new enum for the possible values of this register.
Reviewed-by: NOmer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

drivers/misc/habanalabs/include/goya/goya_reg_map.h

@@ -22,6 +22,7 @@
 #define mmCPU_CQ_BASE_ADDR_LOW			mmPSOC_GLOBAL_CONF_SCRATCHPAD_8
 #define mmCPU_CQ_BASE_ADDR_HIGH			mmPSOC_GLOBAL_CONF_SCRATCHPAD_9
 #define mmCPU_CQ_LENGTH				mmPSOC_GLOBAL_CONF_SCRATCHPAD_10
+#define mmCPU_CMD_STATUS_TO_HOST		mmPSOC_GLOBAL_CONF_SCRATCHPAD_23
 #define mmCPU_BOOT_ERR0				mmPSOC_GLOBAL_CONF_SCRATCHPAD_24
 #define mmCPU_BOOT_ERR1				mmPSOC_GLOBAL_CONF_SCRATCHPAD_25
 #define mmUPD_STS				mmPSOC_GLOBAL_CONF_SCRATCHPAD_26

drivers/misc/habanalabs/include/hl_boot_if.h

 /* SPDX-License-Identifier: GPL-2.0
  *
- * Copyright 2018 HabanaLabs, Ltd.
+ * Copyright 2018-2020 HabanaLabs, Ltd.
  * All Rights Reserved.
  *
  */
@@ -10,7 +10,43 @@
 
 #define LKD_HARD_RESET_MAGIC		0xED7BD694
 
-/* CPU error bits in BOOT_ERROR registers */
+/*
+ * CPU error bits in BOOT_ERROR registers
+ *
+ * CPU_BOOT_ERR0_DRAM_INIT_FAIL		DRAM initialization failed.
+ *					DRAM is not reliable to use.
+ *
+ * CPU_BOOT_ERR0_FIT_CORRUPTED		FIT data integrity verification of the
+ *					image provided by the host has failed.
+ *
+ * CPU_BOOT_ERR0_TS_INIT_FAIL		Thermal Sensor initialization failed.
+ *					Boot continues as usual, but keep in
+ *					mind this is a warning.
+ *
+ * CPU_BOOT_ERR0_DRAM_SKIPPED		DRAM initialization has been skipped.
+ *					Skipping DRAM initialization has been
+ *					requested (e.g. strap, command, etc.)
+ *					and FW skipped the DRAM initialization.
+ *					Host can initialize the DRAM.
+ *
+ * CPU_BOOT_ERR0_BMC_WAIT_SKIPPED	Waiting for BMC data will be skipped.
+ *					Meaning the BMC data might not be
+ *					available until reset.
+ *
+ * CPU_BOOT_ERR0_NIC_DATA_NOT_RDY	NIC data from BMC is not ready.
+ *					BMC has not provided the NIC data yet.
+ *					Once provided this bit will be cleared.
+ *
+ * CPU_BOOT_ERR0_NIC_FW_FAIL		NIC FW loading failed.
+ *					The NIC FW loading and initialization
+ *					failed. This means NICs are not usable.
+ *
+ * CPU_BOOT_ERR0_ENABLED		Error registers enabled.
+ *					This is a main indication that the
+ *					running FW populates the error
+ *					registers. Meaning the error bits are
+ *					not garbage, but actual error statuses.
+ */
 #define CPU_BOOT_ERR0_DRAM_INIT_FAIL		(1 << 0)
 #define CPU_BOOT_ERR0_FIT_CORRUPTED		(1 << 1)
 #define CPU_BOOT_ERR0_TS_INIT_FAIL		(1 << 2)
@@ -27,15 +63,18 @@ enum cpu_boot_status {
 	CPU_BOOT_STATUS_SRAM_AVAIL = 3,
 	CPU_BOOT_STATUS_IN_BTL = 4,	/* BTL is H/W FSM */
 	CPU_BOOT_STATUS_IN_PREBOOT = 5,
-	CPU_BOOT_STATUS_IN_SPL = 6,
+	CPU_BOOT_STATUS_IN_SPL,		/* deprecated - not reported */
 	CPU_BOOT_STATUS_IN_UBOOT = 7,
 	CPU_BOOT_STATUS_DRAM_INIT_FAIL,	/* deprecated - will be removed */
 	CPU_BOOT_STATUS_FIT_CORRUPTED,	/* deprecated - will be removed */
+	/* U-Boot console prompt activated, commands are not processed */
 	CPU_BOOT_STATUS_UBOOT_NOT_READY = 10,
+	/* Finished NICs init, reported after DRAM and NICs */
 	CPU_BOOT_STATUS_NIC_FW_RDY = 11,
 	CPU_BOOT_STATUS_TS_INIT_FAIL,	/* deprecated - will be removed */
 	CPU_BOOT_STATUS_DRAM_SKIPPED,	/* deprecated - will be removed */
 	CPU_BOOT_STATUS_BMC_WAITING_SKIPPED, /* deprecated - will be removed */
+	/* Last boot loader progress status, ready to receive commands */
 	CPU_BOOT_STATUS_READY_TO_BOOT = 15,
 };
 
@@ -46,4 +85,10 @@ enum kmd_msg {
 	KMD_MSG_SKIP_BMC,
 };
 
+enum cpu_msg_status {
+	CPU_MSG_CLR = 0,
+	CPU_MSG_OK,
+	CPU_MSG_ERR,
+};
+
 #endif /* HL_BOOT_IF_H */