regulator: da9121: Add device variant regmaps

Add ability to probe device and validate configuration, then apply a regmap
configuration for a single or dual buck device accordingly.
Signed-off-by: NAdam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/068c6b8d5e1b4e221e899e4c914c429429a2ec7d.1606755367.git.Adam.Ward.opensource@diasemi.comSigned-off-by: NMark Brown <broonie@kernel.org>

drivers/regulator/Kconfig

@@ -313,13 +313,21 @@ config REGULATOR_DA9063
 	  will be called da9063-regulator.
 
 config REGULATOR_DA9121
-	tristate "Dialog Semiconductor DA9121 regulator"
+	tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
 	depends on I2C && OF
 	select REGMAP_I2C
 	help
 	  Say y here to support for the Dialog Semiconductor DA9121.  The
-	  DA9210 is a dual-phase buck converter controlled through an I2C
-	  interface.
+	  DA9121 is a single channel dual-phase buck converter controlled
+	  through an I2C interface.
+
+	  DA9121 Single-channel dual-phase 10A buck converter
+	  DA9130 Single-channel dual-phase 10A buck converter (Automotive)
+	  DA9217 Single-channel dual-phase  6A buck converter
+	  DA9122 Dual-channel single-phase  5A buck converter
+	  DA9131 Dual-channel single-phase  5A buck converter (Automotive)
+	  DA9220 Dual-channel single-phase  3A buck converter
+	  DA9132 Dual-channel single-phase  3A buck converter (Automotive)
 
 	  This driver can also be built as a module. If so, the module
 	  will be called da9121-regulator.

drivers/regulator/da9121-regulator.c

 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (C) 2020 Axis Communications AB */
+//
+// DA9121 Single-channel dual-phase 10A buck converter
+//
+// Copyright (C) 2020 Axis Communications AB
+//
+// DA9130 Single-channel dual-phase 10A buck converter (Automotive)
+// DA9217 Single-channel dual-phase  6A buck converter
+// DA9122 Dual-channel single-phase  5A buck converter
+// DA9131 Dual-channel single-phase  5A buck converter (Automotive)
+// DA9220 Dual-channel single-phase  3A buck converter
+// DA9132 Dual-channel single-phase  3A buck converter (Automotive)
+//
+// Copyright (C) 2020 Dialog Semiconductor
 
 #include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>
@@ -9,26 +21,17 @@
 #include <linux/regmap.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/regulator/da9121.h>
+
 #include "da9121-regulator.h"
 
 /* Chip data */
 struct da9121 {
 	struct device *dev;
+	struct regmap *regmap;
 	int variant_id;
 };
 
-#define DA9121_MIN_MV		300
-#define DA9121_MAX_MV		1900
-#define DA9121_STEP_MV		10
-#define DA9121_MIN_SEL		(DA9121_MIN_MV / DA9121_STEP_MV)
-#define DA9121_N_VOLTAGES	(((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \
-				 + 1 + DA9121_MIN_SEL)
-
-static const struct regmap_config da9121_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-};
-
 static const struct regulator_ops da9121_buck_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -38,6 +41,13 @@ static const struct regulator_ops da9121_buck_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 };
 
+#define DA9121_MIN_MV		300
+#define DA9121_MAX_MV		1900
+#define DA9121_STEP_MV		10
+#define DA9121_MIN_SEL		(DA9121_MIN_MV / DA9121_STEP_MV)
+#define DA9121_N_VOLTAGES	(((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \
+				 + 1 + DA9121_MIN_SEL)
+
 static const struct regulator_desc da9121_reg = {
 	.name = "da9121",
 	.of_match = "buck1",
@@ -58,6 +68,205 @@ static const struct regulator_desc da9121_reg = {
 	.enable_time = 20,
 };
 
+/* DA9121 chip register model */
+static const struct regmap_range da9121_1ch_readable_ranges[] = {
+	regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3),
+	regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+	regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+	regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6),
+	regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID),
+};
+
+static const struct regmap_access_table da9121_1ch_readable_table = {
+	.yes_ranges = da9121_1ch_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9121_1ch_readable_ranges),
+};
+
+static const struct regmap_range da9121_2ch_readable_ranges[] = {
+	regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3),
+	regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+	regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+	regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_7),
+	regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_7),
+	regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID),
+};
+
+static const struct regmap_access_table da9121_2ch_readable_table = {
+	.yes_ranges = da9121_2ch_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9121_2ch_readable_ranges),
+};
+
+static const struct regmap_range da9121_1ch_writeable_ranges[] = {
+	regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3),
+	regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+	regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+	regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2),
+	regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_6),
+};
+
+static const struct regmap_access_table da9121_1ch_writeable_table = {
+	.yes_ranges = da9121_1ch_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9121_1ch_writeable_ranges),
+};
+
+static const struct regmap_range da9121_2ch_writeable_ranges[] = {
+	regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3),
+	regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+	regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+	regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2),
+	regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_7),
+	regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_2),
+	regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_4, DA9xxx_REG_BUCK_BUCK2_7),
+};
+
+static const struct regmap_access_table da9121_2ch_writeable_table = {
+	.yes_ranges = da9121_2ch_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9121_2ch_writeable_ranges),
+};
+
+
+static const struct regmap_range da9121_volatile_ranges[] = {
+	regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_EVENT_2),
+	regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+	regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6),
+};
+
+static const struct regmap_access_table da9121_volatile_table = {
+	.yes_ranges = da9121_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(da9121_volatile_ranges),
+};
+
+/* DA9121 regmap config for 1 channel variants */
+static struct regmap_config da9121_1ch_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = DA9121_REG_OTP_CONFIG_ID,
+	.rd_table = &da9121_1ch_readable_table,
+	.wr_table = &da9121_1ch_writeable_table,
+	.volatile_table = &da9121_volatile_table,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+/* DA9121 regmap config for 2 channel variants */
+static struct regmap_config da9121_2ch_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = DA9121_REG_OTP_CONFIG_ID,
+	.rd_table = &da9121_2ch_readable_table,
+	.wr_table = &da9121_2ch_writeable_table,
+	.volatile_table = &da9121_volatile_table,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int da9121_check_device_type(struct i2c_client *i2c, struct da9121 *chip)
+{
+	u32 device_id;
+	u8 chip_id = chip->variant_id;
+	u32 variant_id;
+	u8 variant_mrc, variant_vrc;
+	char *type;
+	const char *name;
+	bool config_match = false;
+	int ret = 0;
+
+	ret = regmap_read(chip->regmap, DA9121_REG_OTP_DEVICE_ID, &device_id);
+	if (ret < 0) {
+		dev_err(chip->dev, "Cannot read device ID: %d\n", ret);
+		goto error;
+	}
+
+	ret = regmap_read(chip->regmap, DA9121_REG_OTP_VARIANT_ID, &variant_id);
+	if (ret < 0) {
+		dev_err(chip->dev, "Cannot read variant ID: %d\n", ret);
+		goto error;
+	}
+
+	if (device_id != DA9121_DEVICE_ID) {
+		dev_err(chip->dev, "Invalid device ID: 0x%02x\n", device_id);
+		ret = -ENODEV;
+		goto error;
+	}
+
+	variant_vrc = variant_id & DA9121_MASK_OTP_VARIANT_ID_VRC;
+
+	switch (variant_vrc) {
+	case DA9121_VARIANT_VRC:
+		type = "DA9121/DA9130";
+		config_match = (chip_id == DA9121_TYPE_DA9121_DA9130);
+		break;
+	case DA9220_VARIANT_VRC:
+		type = "DA9220/DA9132";
+		config_match = (chip_id == DA9121_TYPE_DA9220_DA9132);
+		break;
+	case DA9122_VARIANT_VRC:
+		type = "DA9122/DA9131";
+		config_match = (chip_id == DA9121_TYPE_DA9122_DA9131);
+		break;
+	case DA9217_VARIANT_VRC:
+		type = "DA9217";
+		config_match = (chip_id == DA9121_TYPE_DA9217);
+		break;
+	default:
+		type = "Unknown";
+		break;
+	}
+
+	dev_info(chip->dev,
+		 "Device detected (device-ID: 0x%02X, var-ID: 0x%02X, %s)\n",
+		 device_id, variant_id, type);
+
+	if (!config_match) {
+		dev_err(chip->dev, "Device tree configuration '%s' does not match detected device.\n", name);
+		ret = -EINVAL;
+		goto error;
+	}
+
+	variant_mrc = (variant_id & DA9121_MASK_OTP_VARIANT_ID_MRC)
+			>> DA9121_SHIFT_OTP_VARIANT_ID_MRC;
+
+	if ((device_id == DA9121_DEVICE_ID) &&
+	    (variant_mrc < DA9121_VARIANT_MRC_BASE)) {
+		dev_err(chip->dev,
+			"Cannot support variant MRC: 0x%02X\n", variant_mrc);
+		ret = -EINVAL;
+	}
+error:
+	return ret;
+}
+
+static int da9121_assign_chip_model(struct i2c_client *i2c,
+			struct da9121 *chip)
+{
+	struct regmap_config *regmap;
+	int ret = 0;
+
+	chip->dev = &i2c->dev;
+
+	switch (chip->variant_id) {
+	case DA9121_TYPE_DA9121_DA9130:
+		fallthrough;
+	case DA9121_TYPE_DA9217:
+		regmap = &da9121_1ch_regmap_config;
+		break;
+	case DA9121_TYPE_DA9122_DA9131:
+		fallthrough;
+	case DA9121_TYPE_DA9220_DA9132:
+		regmap = &da9121_2ch_regmap_config;
+		break;
+	}
+
+	chip->regmap = devm_regmap_init_i2c(i2c, regmap);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "Failed to configure a register map: %d\n",
+			ret);
+	}
+
+	ret = da9121_check_device_type(i2c, chip);
+
+	return ret;
+}
+
 static const struct of_device_id da9121_dt_ids[] = {
 	{ .compatible = "dlg,da9121", .data = (void *) DA9121_TYPE_DA9121_DA9130 },
 	{ .compatible = "dlg,da9130", .data = (void *) DA9121_TYPE_DA9121_DA9130 },
@@ -89,7 +298,6 @@ static int da9121_i2c_probe(struct i2c_client *i2c,
 	struct device *dev = &i2c->dev;
 	struct regulator_config config = {};
 	struct regulator_dev *rdev;
-	struct regmap *regmap;
 
 	chip = devm_kzalloc(&i2c->dev, sizeof(struct da9121), GFP_KERNEL);
 	if (!chip) {
@@ -99,13 +307,13 @@ static int da9121_i2c_probe(struct i2c_client *i2c,
 
 	chip->variant_id = da9121_of_get_id(&i2c->dev);
 
-	regmap = devm_regmap_init_i2c(i2c, &da9121_regmap_config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
+	ret = da9121_assign_chip_model(i2c, chip);
+	if (ret < 0)
+		goto error;
 
 	config.dev = &i2c->dev;
 	config.of_node = dev->of_node;
-	config.regmap = regmap;
+	config.regmap = chip->regmap;
 
 	rdev = devm_regulator_register(&i2c->dev, &da9121_reg, &config);
 	if (IS_ERR(rdev)) {

include/linux/regulator/da9121.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * DA9121 Single-channel dual-phase 10A buck converter
+ * DA9130 Single-channel dual-phase 10A buck converter (Automotive)
+ * DA9217 Single-channel dual-phase  6A buck converter
+ * DA9122 Dual-channel single-phase  5A buck converter
+ * DA9131 Dual-channel single-phase  5A buck converter (Automotive)
+ * DA9220 Dual-channel single-phase  3A buck converter
+ * DA9132 Dual-channel single-phase  3A buck converter (Automotive)
+ *
+ * Copyright (C) 2020  Dialog Semiconductor
+ *
+ * Authors: Adam Ward, Dialog Semiconductor
+ */
+
+#ifndef __LINUX_REGULATOR_DA9121_H
+#define __LINUX_REGULATOR_DA9121_H
+
+enum {
+	DA9121_IDX_BUCK1,
+	DA9121_IDX_BUCK2,
+	DA9121_IDX_MAX
+};
+
+#endif