提交 c77720b9 编写于 作者: M Mauro Carvalho Chehab

i7core: fix get_devices routine for Xeon55xx

i7core_get_devices() were preparet to get just the first found device of each type.
Due to that, on Xeon 55xx, only socket 1 were retrived.

Rework i7core_get_devices() to clean it and to properly support Xeon 55xx.

While here, fix a small typo.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 a639539f
......@@ -410,7 +410,7 @@ static int i7core_get_active_channels(u8 socket, unsigned *channels,
}
}
debugf0("Number of active channels on socked %d: %d\n",
debugf0("Number of active channels on socket %d: %d\n",
socket, *channels);
return 0;
......@@ -1126,107 +1126,137 @@ static void i7core_put_devices(void)
*
* Need to 'get' device 16 func 1 and func 2
*/
static int i7core_get_devices(void)
int i7core_get_onedevice(struct pci_dev **prev, int devno)
{
int rc, i;
struct pci_dev *pdev = NULL;
u8 bus = 0;
u8 socket = 0;
for (i = 0; i < N_DEVS; i++) {
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
pci_devs[devno].dev_id, *prev);
/*
* On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
* aren't announced by acpi. So, we need to use a legacy scan probing
* to detect them
*/
if (unlikely(!pdev && !devno && !prev)) {
pcibios_scan_specific_bus(254);
pcibios_scan_specific_bus(255);
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
pci_devs[i].dev_id, NULL);
pci_devs[devno].dev_id, *prev);
}
if (!pdev && !i) {
pcibios_scan_specific_bus(254);
pcibios_scan_specific_bus(255);
/*
* On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
* is at addr 8086:2c40, instead of 8086:2c41. So, we need
* to probe for the alternate address in case of failure
*/
if (pci_devs[devno].dev_id == PCI_DEVICE_ID_INTEL_I7_NOCORE && !pdev)
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_I7_NOCORE_ALT, *prev);
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
pci_devs[i].dev_id, NULL);
if (!pdev) {
if (*prev) {
*prev = pdev;
return 0;
}
/*
* On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
* is at addr 8086:2c40, instead of 8086:2c41. So, we need
* to probe for the alternate address in case of failure
* Dev 3 function 2 only exists on chips with RDIMMs
* so, it is ok to not found it
*/
if (pci_devs[i].dev_id == PCI_DEVICE_ID_INTEL_I7_NOCORE
&& !pdev)
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_I7_NOCORE_ALT, NULL);
if ((pci_devs[devno].dev == 3) && (pci_devs[devno].func == 2)) {
*prev = pdev;
return 0;
}
if (likely(pdev)) {
bus = pdev->bus->number;
i7core_printk(KERN_ERR,
"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
pci_devs[devno].dev, pci_devs[devno].func,
PCI_VENDOR_ID_INTEL, pci_devs[devno].dev_id);
if (bus == 0x3f)
socket = 0;
else
socket = 255 - bus;
/* End of list, leave */
return -ENODEV;
}
bus = pdev->bus->number;
if (socket >= NUM_SOCKETS) {
i7core_printk(KERN_ERR,
"Found unexpected socket for "
"dev %02x:%02x.%d PCI ID %04x:%04x\n",
bus, pci_devs[i].dev, pci_devs[i].func,
PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id);
if (bus == 0x3f)
socket = 0;
else
socket = 255 - bus;
if (socket >= NUM_SOCKETS) {
i7core_printk(KERN_ERR,
"Unexpected socket for "
"dev %02x:%02x.%d PCI ID %04x:%04x\n",
bus, pci_devs[devno].dev, pci_devs[devno].func,
PCI_VENDOR_ID_INTEL, pci_devs[devno].dev_id);
pci_dev_put(pdev);
return -ENODEV;
}
rc = -ENODEV;
goto error;
}
if (pci_devs[devno].pdev[socket]) {
i7core_printk(KERN_ERR,
"Duplicated device for "
"dev %02x:%02x.%d PCI ID %04x:%04x\n",
bus, pci_devs[devno].dev, pci_devs[devno].func,
PCI_VENDOR_ID_INTEL, pci_devs[devno].dev_id);
pci_dev_put(pdev);
return -ENODEV;
}
pci_devs[i].pdev[socket] = pdev;
} else {
i7core_printk(KERN_ERR,
"Device not found: "
"dev %02x:%02x.%d PCI ID %04x:%04x\n",
bus, pci_devs[i].dev, pci_devs[i].func,
PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id);
pci_devs[devno].pdev[socket] = pdev;
/* Sanity check */
if (unlikely(PCI_SLOT(pdev->devfn) != pci_devs[devno].dev ||
PCI_FUNC(pdev->devfn) != pci_devs[devno].func)) {
i7core_printk(KERN_ERR,
"Device PCI ID %04x:%04x "
"has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
PCI_VENDOR_ID_INTEL, pci_devs[devno].dev_id,
bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
bus, pci_devs[devno].dev, pci_devs[devno].func);
return -ENODEV;
}
/* Dev 3 function 2 only exists on chips with RDIMMs */
if ((pci_devs[i].dev == 3) && (pci_devs[i].func == 2))
continue;
/* Be sure that the device is enabled */
if (unlikely(pci_enable_device(pdev) < 0)) {
i7core_printk(KERN_ERR,
"Couldn't enable "
"dev %02x:%02x.%d PCI ID %04x:%04x\n",
bus, pci_devs[devno].dev, pci_devs[devno].func,
PCI_VENDOR_ID_INTEL, pci_devs[devno].dev_id);
return -ENODEV;
}
/* End of list, leave */
rc = -ENODEV;
goto error;
}
i7core_printk(KERN_INFO,
"Registered socket %d "
"dev %02x:%02x.%d PCI ID %04x:%04x\n",
socket, bus, pci_devs[devno].dev, pci_devs[devno].func,
PCI_VENDOR_ID_INTEL, pci_devs[devno].dev_id);
/* Sanity check */
if (unlikely(PCI_SLOT(pdev->devfn) != pci_devs[i].dev ||
PCI_FUNC(pdev->devfn) != pci_devs[i].func)) {
i7core_printk(KERN_ERR,
"Device PCI ID %04x:%04x "
"has fn %d.%d instead of fn %d.%d\n",
PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
pci_devs[i].dev, pci_devs[i].func);
rc = -EINVAL;
goto error;
}
*prev = pdev;
/* Be sure that the device is enabled */
rc = pci_enable_device(pdev);
if (unlikely(rc < 0)) {
i7core_printk(KERN_ERR,
"Couldn't enable PCI ID %04x:%04x "
"fn %d.%d\n",
PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
goto error;
}
return 0;
}
i7core_printk(KERN_INFO,
"Registered socket %d "
"dev %02x:%02x.%d PCI ID %04x:%04x\n",
socket, bus, pci_devs[i].dev, pci_devs[i].func,
PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id);
}
static int i7core_get_devices(void)
{
int i;
struct pci_dev *pdev = NULL;
for (i = 0; i < N_DEVS; i++) {
pdev = NULL;
do {
if (i7core_get_onedevice(&pdev, i) < 0) {
i7core_put_devices();
return -ENODEV;
}
} while (pdev);
}
return 0;
error:
i7core_put_devices();
return -EINVAL;
}
static int mci_bind_devs(struct mem_ctl_info *mci)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册