提交 c6c23865 编写于 作者: A Arnd Bergmann 提交者: Zheng Zengkai

ARM: iop32x: offset IRQ numbers by 1

stable inclusion
from stable-v5.10.110
commit 20499ed3c0411768912ac7f24a29ad3981b0d80b
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=20499ed3c0411768912ac7f24a29ad3981b0d80b

--------------------------------

commit 9d67412f upstream.

iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.

I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.

Fixes: a71b092a ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[ardb: take +1 offset into account in mask/unmask and init as well]
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Tested-by: NMarc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
上级 8890ee51
......@@ -20,7 +20,7 @@
mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
cmp \irqstat, #0
clzne \irqnr, \irqstat
rsbne \irqnr, \irqnr, #31
rsbne \irqnr, \irqnr, #32
.endm
.macro arch_ret_to_user, tmp1, tmp2
......
......@@ -9,6 +9,6 @@
#ifndef __IRQS_H
#define __IRQS_H
#define NR_IRQS 32
#define NR_IRQS 33
#endif
......@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
static void
iop32x_irq_mask(struct irq_data *d)
{
iop32x_mask &= ~(1 << d->irq);
iop32x_mask &= ~(1 << (d->irq - 1));
intctl_write(iop32x_mask);
}
static void
iop32x_irq_unmask(struct irq_data *d)
{
iop32x_mask |= 1 << d->irq;
iop32x_mask |= 1 << (d->irq - 1);
intctl_write(iop32x_mask);
}
......@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
machine_is_em7210())
*IOP3XX_PCIIRSR = 0x0f;
for (i = 0; i < NR_IRQS; i++) {
for (i = 1; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
}
......
......@@ -7,36 +7,40 @@
#ifndef __IOP32X_IRQS_H
#define __IOP32X_IRQS_H
/* Interrupts in Linux start at 1, hardware starts at 0 */
#define IOP_IRQ(x) ((x) + 1)
/*
* IOP80321 chipset interrupts
*/
#define IRQ_IOP32X_DMA0_EOT 0
#define IRQ_IOP32X_DMA0_EOC 1
#define IRQ_IOP32X_DMA1_EOT 2
#define IRQ_IOP32X_DMA1_EOC 3
#define IRQ_IOP32X_AA_EOT 6
#define IRQ_IOP32X_AA_EOC 7
#define IRQ_IOP32X_CORE_PMON 8
#define IRQ_IOP32X_TIMER0 9
#define IRQ_IOP32X_TIMER1 10
#define IRQ_IOP32X_I2C_0 11
#define IRQ_IOP32X_I2C_1 12
#define IRQ_IOP32X_MESSAGING 13
#define IRQ_IOP32X_ATU_BIST 14
#define IRQ_IOP32X_PERFMON 15
#define IRQ_IOP32X_CORE_PMU 16
#define IRQ_IOP32X_BIU_ERR 17
#define IRQ_IOP32X_ATU_ERR 18
#define IRQ_IOP32X_MCU_ERR 19
#define IRQ_IOP32X_DMA0_ERR 20
#define IRQ_IOP32X_DMA1_ERR 21
#define IRQ_IOP32X_AA_ERR 23
#define IRQ_IOP32X_MSG_ERR 24
#define IRQ_IOP32X_SSP 25
#define IRQ_IOP32X_XINT0 27
#define IRQ_IOP32X_XINT1 28
#define IRQ_IOP32X_XINT2 29
#define IRQ_IOP32X_XINT3 30
#define IRQ_IOP32X_HPI 31
#define IRQ_IOP32X_DMA0_EOT IOP_IRQ(0)
#define IRQ_IOP32X_DMA0_EOC IOP_IRQ(1)
#define IRQ_IOP32X_DMA1_EOT IOP_IRQ(2)
#define IRQ_IOP32X_DMA1_EOC IOP_IRQ(3)
#define IRQ_IOP32X_AA_EOT IOP_IRQ(6)
#define IRQ_IOP32X_AA_EOC IOP_IRQ(7)
#define IRQ_IOP32X_CORE_PMON IOP_IRQ(8)
#define IRQ_IOP32X_TIMER0 IOP_IRQ(9)
#define IRQ_IOP32X_TIMER1 IOP_IRQ(10)
#define IRQ_IOP32X_I2C_0 IOP_IRQ(11)
#define IRQ_IOP32X_I2C_1 IOP_IRQ(12)
#define IRQ_IOP32X_MESSAGING IOP_IRQ(13)
#define IRQ_IOP32X_ATU_BIST IOP_IRQ(14)
#define IRQ_IOP32X_PERFMON IOP_IRQ(15)
#define IRQ_IOP32X_CORE_PMU IOP_IRQ(16)
#define IRQ_IOP32X_BIU_ERR IOP_IRQ(17)
#define IRQ_IOP32X_ATU_ERR IOP_IRQ(18)
#define IRQ_IOP32X_MCU_ERR IOP_IRQ(19)
#define IRQ_IOP32X_DMA0_ERR IOP_IRQ(20)
#define IRQ_IOP32X_DMA1_ERR IOP_IRQ(21)
#define IRQ_IOP32X_AA_ERR IOP_IRQ(23)
#define IRQ_IOP32X_MSG_ERR IOP_IRQ(24)
#define IRQ_IOP32X_SSP IOP_IRQ(25)
#define IRQ_IOP32X_XINT0 IOP_IRQ(27)
#define IRQ_IOP32X_XINT1 IOP_IRQ(28)
#define IRQ_IOP32X_XINT2 IOP_IRQ(29)
#define IRQ_IOP32X_XINT3 IOP_IRQ(30)
#define IRQ_IOP32X_HPI IOP_IRQ(31)
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册