提交 c6c022e3 编写于 作者: P Philippe Reynes 提交者: David S. Miller

net: ethernet: marvell: mvneta: use phydev from struct net_device

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy_dev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 72582fdb
......@@ -399,7 +399,6 @@ struct mvneta_port {
u16 rx_ring_size;
struct mii_bus *mii_bus;
struct phy_device *phy_dev;
phy_interface_t phy_interface;
struct device_node *phy_node;
unsigned int link;
......@@ -2651,6 +2650,7 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
u32 cause_rx_tx;
int rx_queue;
struct mvneta_port *pp = netdev_priv(napi->dev);
struct net_device *ndev = pp->dev;
struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
if (!netif_running(pp->dev)) {
......@@ -2668,7 +2668,7 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
(MVNETA_CAUSE_PHY_STATUS_CHANGE |
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE))) {
mvneta_fixed_link_update(pp, pp->phy_dev);
mvneta_fixed_link_update(pp, ndev->phydev);
}
}
......@@ -2963,6 +2963,7 @@ static int mvneta_setup_txqs(struct mvneta_port *pp)
static void mvneta_start_dev(struct mvneta_port *pp)
{
int cpu;
struct net_device *ndev = pp->dev;
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
......@@ -2985,15 +2986,16 @@ static void mvneta_start_dev(struct mvneta_port *pp)
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE);
phy_start(pp->phy_dev);
phy_start(ndev->phydev);
netif_tx_start_all_queues(pp->dev);
}
static void mvneta_stop_dev(struct mvneta_port *pp)
{
unsigned int cpu;
struct net_device *ndev = pp->dev;
phy_stop(pp->phy_dev);
phy_stop(ndev->phydev);
for_each_online_cpu(cpu) {
struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
......@@ -3166,7 +3168,7 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
static void mvneta_adjust_link(struct net_device *ndev)
{
struct mvneta_port *pp = netdev_priv(ndev);
struct phy_device *phydev = pp->phy_dev;
struct phy_device *phydev = ndev->phydev;
int status_change = 0;
if (phydev->link) {
......@@ -3244,7 +3246,6 @@ static int mvneta_mdio_probe(struct mvneta_port *pp)
phy_dev->supported &= PHY_GBIT_FEATURES;
phy_dev->advertising = phy_dev->supported;
pp->phy_dev = phy_dev;
pp->link = 0;
pp->duplex = 0;
pp->speed = 0;
......@@ -3254,8 +3255,9 @@ static int mvneta_mdio_probe(struct mvneta_port *pp)
static void mvneta_mdio_remove(struct mvneta_port *pp)
{
phy_disconnect(pp->phy_dev);
pp->phy_dev = NULL;
struct net_device *ndev = pp->dev;
phy_disconnect(ndev->phydev);
}
/* Electing a CPU must be done in an atomic way: it should be done
......@@ -3495,12 +3497,10 @@ static int mvneta_stop(struct net_device *dev)
static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mvneta_port *pp = netdev_priv(dev);
if (!pp->phy_dev)
if (!dev->phydev)
return -ENOTSUPP;
return phy_mii_ioctl(pp->phy_dev, ifr, cmd);
return phy_mii_ioctl(dev->phydev, ifr, cmd);
}
/* Ethtool methods */
......@@ -3508,19 +3508,17 @@ static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
/* Get settings (phy address, speed) for ethtools */
int mvneta_ethtool_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mvneta_port *pp = netdev_priv(dev);
if (!pp->phy_dev)
if (!dev->phydev)
return -ENODEV;
return phy_ethtool_gset(pp->phy_dev, cmd);
return phy_ethtool_gset(dev->phydev, cmd);
}
/* Set settings (phy address, speed) for ethtools */
int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mvneta_port *pp = netdev_priv(dev);
struct phy_device *phydev = pp->phy_dev;
struct phy_device *phydev = dev->phydev;
if (!phydev)
return -ENODEV;
......@@ -3557,7 +3555,7 @@ int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
}
return phy_ethtool_sset(pp->phy_dev, cmd);
return phy_ethtool_sset(dev->phydev, cmd);
}
/* Set interrupt coalescing for ethtools */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册