V4L/DVB (9327): v4l: use video_device.num instead of minor in video%d

The kernel number of a v4l2 node (e.g. videoX, radioX or vbiX) is now
independent of the minor number. So instead of using the minor field
of the video_device struct one has to use the num field: this always
contains the kernel number of the device node.

I forgot about this when I did the v4l2 core change, so this patch
converts all drivers that use it in one go. Luckily the change is
trivial.

Cc: michael@mihu.de
Cc: mchehab@infradead.org
Cc: corbet@lwn.net
Cc: luca.risolia@studio.unibo.it
Cc: isely@pobox.com
Cc: pe1rxq@amsat.org
Cc: royale@zerezo.com
Cc: mkrufky@linuxtv.org
Cc: stoth@linuxtv.org
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/common/saa7146_fops.c

@@ -545,11 +545,11 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev,
 	if( VFL_TYPE_GRABBER == type ) {
 		vv->video_minor = vfd->minor;
 		INFO(("%s: registered device video%d [v4l2]\n",
-			dev->name, vfd->minor & 0x1f));
+			dev->name, vfd->num));
 	} else {
 		vv->vbi_minor = vfd->minor;
 		INFO(("%s: registered device vbi%d [v4l2]\n",
-			dev->name, vfd->minor & 0x1f));
+			dev->name, vfd->num));
 	}
 
 	*vid = vfd;

drivers/media/video/arv.c

@@ -866,7 +866,7 @@ static int __init ar_init(void)
 	}
 
 	printk("video%d: Found M64278 VGA (IRQ %d, Freq %dMHz).\n",
-		ar->vdev->minor, M32R_IRQ_INT3, freq);
+		ar->vdev->num, M32R_IRQ_INT3, freq);
 
 	return 0;
 

drivers/media/video/bt8xx/bttv-driver.c

@@ -4246,7 +4246,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
 				  video_nr[btv->c.nr]) < 0)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device video%d\n",
-	       btv->c.nr,btv->video_dev->minor & 0x1f);
+	       btv->c.nr, btv->video_dev->num);
 	if (device_create_file(&btv->video_dev->dev,
 				     &dev_attr_card)<0) {
 		printk(KERN_ERR "bttv%d: device_create_file 'card' "
@@ -4263,7 +4263,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
 				  vbi_nr[btv->c.nr]) < 0)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device vbi%d\n",
-	       btv->c.nr,btv->vbi_dev->minor & 0x1f);
+	       btv->c.nr, btv->vbi_dev->num);
 
 	if (!btv->has_radio)
 		return 0;
@@ -4275,7 +4275,7 @@ static int __devinit bttv_register_video(struct bttv *btv)
 				  radio_nr[btv->c.nr]) < 0)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device radio%d\n",
-	       btv->c.nr,btv->radio_dev->minor & 0x1f);
+	       btv->c.nr, btv->radio_dev->num);
 
 	/* all done */
 	return 0;

drivers/media/video/c-qcam.c

@@ -815,7 +815,7 @@ static int init_cqcam(struct parport *port)
 	}
 
 	printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
-	       qcam->vdev.minor, qcam->pport->name);
+	       qcam->vdev.num, qcam->pport->name);
 
 	qcams[num_cams++] = qcam;
 

drivers/media/video/cafe_ccic.c

@@ -2059,10 +2059,10 @@ static void cafe_dfs_cam_setup(struct cafe_camera *cam)
 
 	if (!cafe_dfs_root)
 		return;
-	sprintf(fname, "regs-%d", cam->v4ldev.minor);
+	sprintf(fname, "regs-%d", cam->v4ldev.num);
 	cam->dfs_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
 			cam, &cafe_dfs_reg_ops);
-	sprintf(fname, "cam-%d", cam->v4ldev.minor);
+	sprintf(fname, "cam-%d", cam->v4ldev.num);
 	cam->dfs_cam_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
 			cam, &cafe_dfs_cam_ops);
 }

drivers/media/video/cpia.c

@@ -1347,7 +1347,7 @@ static void create_proc_cpia_cam(struct cam_data *cam)
 	if (!cpia_proc_root || !cam)
 		return;
 
-	snprintf(name, sizeof(name), "video%d", cam->vdev.minor);
+	snprintf(name, sizeof(name), "video%d", cam->vdev.num);
 
 	ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root);
 	if (!ent)
@@ -1372,7 +1372,7 @@ static void destroy_proc_cpia_cam(struct cam_data *cam)
 	if (!cam || !cam->proc_entry)
 		return;
 
-	snprintf(name, sizeof(name), "video%d", cam->vdev.minor);
+	snprintf(name, sizeof(name), "video%d", cam->vdev.num);
 	remove_proc_entry(name, cpia_proc_root);
 	cam->proc_entry = NULL;
 }
@@ -4005,7 +4005,7 @@ void cpia_unregister_camera(struct cam_data *cam)
 	}
 
 #ifdef CONFIG_PROC_FS
-	DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor);
+	DBG("destroying /proc/cpia/video%d\n", cam->vdev.num);
 	destroy_proc_cpia_cam(cam);
 #endif
 	if (!cam->open_count) {

drivers/media/video/cpia2/cpia2_v4l.c

@@ -1973,7 +1973,7 @@ void cpia2_unregister_camera(struct camera_data *cam)
 	} else {
 		LOG("/dev/video%d removed while open, "
 		    "deferring video_unregister_device\n",
-		    cam->vdev->minor);
+		    cam->vdev->num);
 	}
 }
 

drivers/media/video/cx23885/cx23885-417.c

@@ -1815,7 +1815,7 @@ int cx23885_417_register(struct cx23885_dev *dev)
 	cx23885_mc417_init(dev);
 
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
-	       dev->name, dev->v4l_device->minor & 0x1f);
+	       dev->name, dev->v4l_device->num);
 
 	return 0;
 }

drivers/media/video/cx23885/cx23885-video.c

@@ -1543,7 +1543,7 @@ int cx23885_video_register(struct cx23885_dev *dev)
 		goto fail_unreg;
 	}
 	printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
-	       dev->name, dev->video_dev->minor & 0x1f);
+	       dev->name, dev->video_dev->num);
 	/* initial device configuration */
 	mutex_lock(&dev->lock);
 	cx23885_set_tvnorm(dev, dev->tvnorm);

drivers/media/video/cx88/cx88-blackbird.c

@@ -1285,7 +1285,7 @@ static int blackbird_register_video(struct cx8802_dev *dev)
 		return err;
 	}
 	printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n",
-	       dev->core->name,dev->mpeg_dev->minor & 0x1f);
+	       dev->core->name, dev->mpeg_dev->num);
 	return 0;
 }
 

drivers/media/video/cx88/cx88-video.c

@@ -1911,7 +1911,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 		goto fail_unreg;
 	}
 	printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
-	       core->name,dev->video_dev->minor & 0x1f);
+	       core->name, dev->video_dev->num);
 
 	dev->vbi_dev = cx88_vdev_init(core,dev->pci,&cx8800_vbi_template,"vbi");
 	err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
@@ -1922,7 +1922,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 		goto fail_unreg;
 	}
 	printk(KERN_INFO "%s/0: registered device vbi%d\n",
-	       core->name,dev->vbi_dev->minor & 0x1f);
+	       core->name, dev->vbi_dev->num);
 
 	if (core->board.radio.type == CX88_RADIO) {
 		dev->radio_dev = cx88_vdev_init(core,dev->pci,
@@ -1935,7 +1935,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 			goto fail_unreg;
 		}
 		printk(KERN_INFO "%s/0: registered device radio%d\n",
-		       core->name,dev->radio_dev->minor & 0x1f);
+		       core->name, dev->radio_dev->num);
 	}
 
 	/* everything worked */

drivers/media/video/em28xx/em28xx-video.c

@@ -2042,7 +2042,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 			goto fail_unreg;
 		}
 		em28xx_info("Registered radio device as /dev/radio%d\n",
-			    dev->radio_dev->minor & 0x1f);
+			    dev->radio_dev->num);
 	}
 
 	/* init video dma queues */

drivers/media/video/et61x251/et61x251_core.c

@@ -588,7 +588,7 @@ static int et61x251_stream_interrupt(struct et61x251_device* cam)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "URB timeout reached. The camera is misconfigured. To "
 		       "use it, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1195,7 +1195,7 @@ static void et61x251_release_resources(struct kref *kref)
 
 	cam = container_of(kref, struct et61x251_device, kref);
 
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 	usb_put_dev(cam->usbdev);
@@ -1237,7 +1237,7 @@ static int et61x251_open(struct inode* inode, struct file* filp)
 
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is already in use",
-		       cam->v4ldev->minor);
+		       cam->v4ldev->num);
 		DBG(3, "Simultaneous opens are not supported");
 		if ((filp->f_flags & O_NONBLOCK) ||
 		    (filp->f_flags & O_NDELAY)) {
@@ -1280,7 +1280,7 @@ static int et61x251_open(struct inode* inode, struct file* filp)
 	cam->frame_count = 0;
 	et61x251_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
 
 out:
 	mutex_unlock(&cam->open_mutex);
@@ -1304,7 +1304,7 @@ static int et61x251_release(struct inode* inode, struct file* filp)
 	cam->users--;
 	wake_up_interruptible_nr(&cam->wait_open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
 
 	kref_put(&cam->kref, et61x251_release_resources);
 
@@ -1845,7 +1845,7 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1858,7 +1858,7 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2068,7 +2068,7 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2080,7 +2080,7 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2128,7 +2128,7 @@ et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
 		       "problems. To use the camera, close and open "
-		       "/dev/video%d again.", cam->v4ldev->minor);
+		       "/dev/video%d again.", cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2605,7 +2605,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
 
 	cam->module_param.force_munmap = force_munmap[dev_nr];
 	cam->module_param.frame_timeout = frame_timeout[dev_nr];
@@ -2658,7 +2658,7 @@ static void et61x251_usb_disconnect(struct usb_interface* intf)
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is open! Deregistration and "
 		       "memory deallocation are deferred.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		cam->state |= DEV_MISCONFIGURED;
 		et61x251_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;

drivers/media/video/pvrusb2/pvrusb2-v4l2.c

@@ -893,7 +893,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file,
 
 static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
 {
-	int minor_id = dip->devbase.minor;
+	int num = dip->devbase.num;
 	struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw;
 	enum pvr2_config cfg = dip->config;
 	int v4l_type = dip->v4l_type;
@@ -909,7 +909,7 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
 	video_unregister_device(&dip->devbase);
 
 	printk(KERN_INFO "pvrusb2: unregistered device %s%u [%s]\n",
-	       get_v4l_name(v4l_type),minor_id & 0x1f,
+	       get_v4l_name(v4l_type), num,
 	       pvr2_config_get_name(cfg));
 
 }
@@ -1310,7 +1310,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
 	}
 
 	printk(KERN_INFO "pvrusb2: registered device %s%u [%s]\n",
-	       get_v4l_name(dip->v4l_type),dip->devbase.minor & 0x1f,
+	       get_v4l_name(dip->v4l_type), dip->devbase.num,
 	       pvr2_config_get_name(dip->config));
 
 	pvr2_hdw_v4l_store_minor_number(vp->channel.mc_head->hdw,

drivers/media/video/pwc/pwc-if.c

@@ -1795,7 +1795,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		goto err;
 	}
 	else {
-		PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F);
+		PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->num);
 	}
 
 	/* occupy slot */

drivers/media/video/saa7134/saa7134-core.c

@@ -996,7 +996,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		goto fail4;
 	}
 	printk(KERN_INFO "%s: registered device video%d [v4l2]\n",
-	       dev->name,dev->video_dev->minor & 0x1f);
+	       dev->name, dev->video_dev->num);
 
 	dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
 
@@ -1005,7 +1005,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (err < 0)
 		goto fail4;
 	printk(KERN_INFO "%s: registered device vbi%d\n",
-	       dev->name,dev->vbi_dev->minor & 0x1f);
+	       dev->name, dev->vbi_dev->num);
 
 	if (card_has_radio(dev)) {
 		dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
@@ -1014,7 +1014,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		if (err < 0)
 			goto fail4;
 		printk(KERN_INFO "%s: registered device radio%d\n",
-		       dev->name,dev->radio_dev->minor & 0x1f);
+		       dev->name, dev->radio_dev->num);
 	}
 
 	/* everything worked */

drivers/media/video/saa7134/saa7134-empress.c

@@ -534,7 +534,7 @@ static int empress_init(struct saa7134_dev *dev)
 		return err;
 	}
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
-	       dev->name,dev->empress_dev->minor & 0x1f);
+	       dev->name, dev->empress_dev->num);
 
 	videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops,
 			    &dev->pci->dev, &dev->slock,

drivers/media/video/se401.c

@@ -1412,7 +1412,7 @@ static int se401_probe(struct usb_interface *intf,
 		return -EIO;
 	}
 	dev_info(&intf->dev, "registered new video device: video%d\n",
-		 se401->vdev.minor);
+		 se401->vdev.num);
 
 	usb_set_intfdata (intf, se401);
 	return 0;

drivers/media/video/sn9c102/sn9c102_core.c

@@ -1008,7 +1008,7 @@ static int sn9c102_stream_interrupt(struct sn9c102_device* cam)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "URB timeout reached. The camera is misconfigured. "
 		       "To use it, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1734,7 +1734,7 @@ static void sn9c102_release_resources(struct kref *kref)
 
 	cam = container_of(kref, struct sn9c102_device, kref);
 
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 	usb_put_dev(cam->usbdev);
@@ -1792,7 +1792,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp)
 
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is already in use",
-		       cam->v4ldev->minor);
+		       cam->v4ldev->num);
 		DBG(3, "Simultaneous opens are not supported");
 		/*
 		   open() must follow the open flags and should block
@@ -1845,7 +1845,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp)
 	cam->frame_count = 0;
 	sn9c102_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
 
 out:
 	mutex_unlock(&cam->open_mutex);
@@ -1870,7 +1870,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp)
 	cam->users--;
 	wake_up_interruptible_nr(&cam->wait_open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
 
 	kref_put(&cam->kref, sn9c102_release_resources);
 
@@ -2432,7 +2432,7 @@ sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2445,7 +2445,7 @@ sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2689,7 +2689,7 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2701,7 +2701,7 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2748,7 +2748,7 @@ sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
 		       "problems. To use the camera, close and open "
-		       "/dev/video%d again.", cam->v4ldev->minor);
+		       "/dev/video%d again.", cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -3348,7 +3348,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
 
 	video_set_drvdata(cam->v4ldev, cam);
 	cam->module_param.force_munmap = force_munmap[dev_nr];
@@ -3402,7 +3402,7 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf)
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is open! Deregistration and "
 		       "memory deallocation are deferred.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		cam->state |= DEV_MISCONFIGURED;
 		sn9c102_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;

drivers/media/video/stk-webcam.c

@@ -1331,7 +1331,7 @@ static int stk_register_video_device(struct stk_camera *dev)
 		STK_ERROR("v4l registration failed\n");
 	else
 		STK_INFO("Syntek USB2.0 Camera is now controlling video device"
-			" /dev/video%d\n", dev->vdev.minor);
+			" /dev/video%d\n", dev->vdev.num);
 	return err;
 }
 
@@ -1426,7 +1426,7 @@ static void stk_camera_disconnect(struct usb_interface *interface)
 	stk_remove_sysfs_files(&dev->vdev);
 
 	STK_INFO("Syntek USB2.0 Camera release resources "
-		"video device /dev/video%d\n", dev->vdev.minor);
+		"video device /dev/video%d\n", dev->vdev.num);
 
 	video_unregister_device(&dev->vdev);
 }

drivers/media/video/stv680.c

@@ -1470,7 +1470,8 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id
 		retval = -EIO;
 		goto error_vdev;
 	}
-	PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor);
+	PDEBUG(0, "STV(i): registered new video device: video%d",
+		stv680->vdev->num);
 
 	usb_set_intfdata (intf, stv680);
 	retval = stv680_create_sysfs_files(stv680->vdev);

drivers/media/video/usbvideo/usbvideo.c

@@ -1059,7 +1059,7 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd)
 
 	dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n",
 		 (uvd->handle != NULL) ? uvd->handle->drvName : "???",
-		 uvd->vdev.minor, tmp2, tmp1);
+		 uvd->vdev.num, tmp2, tmp1);
 
 	usb_get_dev(uvd->dev);
 	return 0;

drivers/media/video/usbvideo/vicam.c

@@ -877,7 +877,8 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
 		return -EIO;
 	}
 
-	printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor);
+	printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",
+			cam->vdev.num);
 
 	usb_set_intfdata (intf, cam);
 

drivers/media/video/usbvision/usbvision-i2c.c

@@ -236,7 +236,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 	       sizeof(struct i2c_client));
 
 	sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name),
-		" #%d", usbvision->vdev->minor & 0x1f);
+		" #%d", usbvision->vdev->num);
 	PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name);
 	usbvision->i2c_adap.dev.parent = &usbvision->dev->dev;
 

drivers/media/video/usbvision/usbvision-video.c

@@ -1440,7 +1440,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 	// vbi Device:
 	if (usbvision->vbi) {
 		PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]",
-		       usbvision->vbi->minor & 0x1f);
+		       usbvision->vbi->num);
 		if (usbvision->vbi->minor != -1) {
 			video_unregister_device(usbvision->vbi);
 		} else {
@@ -1452,7 +1452,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 	// Radio Device:
 	if (usbvision->rdev) {
 		PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]",
-		       usbvision->rdev->minor & 0x1f);
+		       usbvision->rdev->num);
 		if (usbvision->rdev->minor != -1) {
 			video_unregister_device(usbvision->rdev);
 		} else {
@@ -1464,7 +1464,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 	// Video Device:
 	if (usbvision->vdev) {
 		PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]",
-		       usbvision->vdev->minor & 0x1f);
+		       usbvision->vdev->num);
 		if (usbvision->vdev->minor != -1) {
 			video_unregister_device(usbvision->vdev);
 		} else {
@@ -1490,7 +1490,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 		goto err_exit;
 	}
 	printk(KERN_INFO "USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]\n",
-	       usbvision->nr,usbvision->vdev->minor & 0x1f);
+	       usbvision->nr, usbvision->vdev->num);
 
 	// Radio Device:
 	if (usbvision_device_data[usbvision->DevModel].Radio) {
@@ -1507,7 +1507,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 			goto err_exit;
 		}
 		printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]\n",
-		       usbvision->nr, usbvision->rdev->minor & 0x1f);
+		       usbvision->nr, usbvision->rdev->num);
 	}
 	// vbi Device:
 	if (usbvision_device_data[usbvision->DevModel].vbi) {
@@ -1523,7 +1523,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 			goto err_exit;
 		}
 		printk(KERN_INFO "USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)\n",
-		       usbvision->nr,usbvision->vbi->minor & 0x1f);
+		       usbvision->nr, usbvision->vbi->num);
 	}
 	// all done
 	return 0;

drivers/media/video/vivi.c

@@ -1163,11 +1163,11 @@ static int vivi_release(void)
 
 		if (-1 != dev->vfd->minor) {
 			printk(KERN_INFO "%s: unregistering /dev/video%d\n",
-				VIVI_MODULE_NAME, dev->vfd->minor);
+				VIVI_MODULE_NAME, dev->vfd->num);
 			video_unregister_device(dev->vfd);
 		} else {
 			printk(KERN_INFO "%s: releasing /dev/video%d\n",
-				VIVI_MODULE_NAME, dev->vfd->minor);
+				VIVI_MODULE_NAME, dev->vfd->num);
 			video_device_release(dev->vfd);
 		}
 
@@ -1307,7 +1307,7 @@ static int __init vivi_init(void)
 
 		dev->vfd = vfd;
 		printk(KERN_INFO "%s: V4L2 device registered as /dev/video%d\n",
-			VIVI_MODULE_NAME, vfd->minor);
+			VIVI_MODULE_NAME, vfd->num);
 	}
 
 	if (ret < 0) {

drivers/media/video/w9968cf.c

@@ -2398,7 +2398,7 @@ static int w9968cf_sensor_init(struct w9968cf_device* cam)
 	cam->sensor = CC_UNKNOWN;
 	DBG(1, "Image sensor initialization failed for %s (/dev/video%d). "
 	       "Try to detach and attach this device again",
-	    symbolic(camlist, cam->id), cam->v4ldev->minor)
+	    symbolic(camlist, cam->id), cam->v4ldev->num)
 	return err;
 }
 
@@ -2644,7 +2644,7 @@ static void w9968cf_release_resources(struct w9968cf_device* cam)
 {
 	mutex_lock(&w9968cf_devlist_mutex);
 
-	DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor)
+	DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->num)
 
 	video_unregister_device(cam->v4ldev);
 	list_del(&cam->v4llist);
@@ -2679,7 +2679,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp)
 		DBG(2, "No supported image sensor has been detected by the "
 		       "'ovcamchip' module for the %s (/dev/video%d). Make "
 		       "sure it is loaded *before* (re)connecting the camera.",
-		    symbolic(camlist, cam->id), cam->v4ldev->minor)
+		    symbolic(camlist, cam->id), cam->v4ldev->num)
 		mutex_unlock(&cam->dev_mutex);
 		up_read(&w9968cf_disconnect);
 		return -ENODEV;
@@ -2687,7 +2687,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp)
 
 	if (cam->users) {
 		DBG(2, "%s (/dev/video%d) has been already occupied by '%s'",
-		    symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command)
+		    symbolic(camlist, cam->id), cam->v4ldev->num, cam->command)
 		if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
 			mutex_unlock(&cam->dev_mutex);
 			up_read(&w9968cf_disconnect);
@@ -2709,7 +2709,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp)
 	}
 
 	DBG(5, "Opening '%s', /dev/video%d ...",
-	    symbolic(camlist, cam->id), cam->v4ldev->minor)
+	    symbolic(camlist, cam->id), cam->v4ldev->num)
 
 	cam->streaming = 0;
 	cam->misconfigured = 0;
@@ -2947,7 +2947,7 @@ static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp,
 			.minheight = cam->minheight,
 		};
 		sprintf(cap.name, "W996[87]CF USB Camera #%d",
-			cam->v4ldev->minor);
+			cam->v4ldev->num);
 		cap.maxwidth = (cam->upscaling && w9968cf_vpp)
 			       ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
 				 : cam->maxwidth;
@@ -3567,7 +3567,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 		goto fail;
 	}
 
-	DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor)
+	DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->num)
 
 	/* Set some basic constants */
 	w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
@@ -3618,7 +3618,7 @@ static void w9968cf_usb_disconnect(struct usb_interface* intf)
 			DBG(2, "The device is open (/dev/video%d)! "
 			       "Process name: %s. Deregistration and memory "
 			       "deallocation are deferred on close.",
-			    cam->v4ldev->minor, cam->command)
+			    cam->v4ldev->num, cam->command)
 			cam->misconfigured = 1;
 			w9968cf_stop_transfer(cam);
 			wake_up_interruptible(&cam->wait_queue);

drivers/media/video/zc0301/zc0301_core.c

@@ -539,7 +539,7 @@ static int zc0301_stream_interrupt(struct zc0301_device* cam)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "URB timeout reached. The camera is misconfigured. To "
 		       "use it, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -640,7 +640,7 @@ static void zc0301_release_resources(struct kref *kref)
 {
 	struct zc0301_device *cam = container_of(kref, struct zc0301_device,
 						 kref);
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 	usb_put_dev(cam->usbdev);
@@ -679,7 +679,7 @@ static int zc0301_open(struct inode* inode, struct file* filp)
 	}
 
 	if (cam->users) {
-		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->num);
 		DBG(3, "Simultaneous opens are not supported");
 		if ((filp->f_flags & O_NONBLOCK) ||
 		    (filp->f_flags & O_NDELAY)) {
@@ -722,7 +722,7 @@ static int zc0301_open(struct inode* inode, struct file* filp)
 	cam->frame_count = 0;
 	zc0301_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
 
 out:
 	mutex_unlock(&cam->open_mutex);
@@ -746,7 +746,7 @@ static int zc0301_release(struct inode* inode, struct file* filp)
 	cam->users--;
 	wake_up_interruptible_nr(&cam->wait_open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
 
 	kref_put(&cam->kref, zc0301_release_resources);
 
@@ -1275,7 +1275,7 @@ zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1288,7 +1288,7 @@ zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -1470,7 +1470,7 @@ zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1482,7 +1482,7 @@ zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -1529,7 +1529,7 @@ zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
 		       "problems. To use the camera, close and open "
-		       "/dev/video%d again.", cam->v4ldev->minor);
+		       "/dev/video%d again.", cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2005,7 +2005,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
 
 	cam->module_param.force_munmap = force_munmap[dev_nr];
 	cam->module_param.frame_timeout = frame_timeout[dev_nr];
@@ -2044,7 +2044,7 @@ static void zc0301_usb_disconnect(struct usb_interface* intf)
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is open! Deregistration and "
 		       "memory deallocation are deferred.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		cam->state |= DEV_MISCONFIGURED;
 		zc0301_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;

drivers/media/video/zr364xx.c

@@ -885,7 +885,7 @@ static int zr364xx_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, cam);
 
 	dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n",
-		 cam->vdev->minor);
+		 cam->vdev->num);
 	return 0;
 }