can: kvaser_pciefd: Empty SRB buffer in probe

Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a
known state, and don't process any irrelevant packets.

Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: NJimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/kvaser_pciefd.c

@@ -71,10 +71,12 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices");
 #define KVASER_PCIEFD_SYSID_BUILD_REG (KVASER_PCIEFD_SYSID_BASE + 0x14)
 /* Shared receive buffer registers */
 #define KVASER_PCIEFD_SRB_BASE 0x1f200
+#define KVASER_PCIEFD_SRB_FIFO_LAST_REG (KVASER_PCIEFD_SRB_BASE + 0x1f4)
 #define KVASER_PCIEFD_SRB_CMD_REG (KVASER_PCIEFD_SRB_BASE + 0x200)
 #define KVASER_PCIEFD_SRB_IEN_REG (KVASER_PCIEFD_SRB_BASE + 0x204)
 #define KVASER_PCIEFD_SRB_IRQ_REG (KVASER_PCIEFD_SRB_BASE + 0x20c)
 #define KVASER_PCIEFD_SRB_STAT_REG (KVASER_PCIEFD_SRB_BASE + 0x210)
+#define KVASER_PCIEFD_SRB_RX_NR_PACKETS_REG (KVASER_PCIEFD_SRB_BASE + 0x214)
 #define KVASER_PCIEFD_SRB_CTRL_REG (KVASER_PCIEFD_SRB_BASE + 0x218)
 /* EPCS flash controller registers */
 #define KVASER_PCIEFD_SPI_BASE 0x1fc00
@@ -111,6 +113,9 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices");
 /* DMA support */
 #define KVASER_PCIEFD_SRB_STAT_DMA BIT(24)
 
+/* SRB current packet level */
+#define KVASER_PCIEFD_SRB_RX_NR_PACKETS_MASK 0xff
+
 /* DMA Enable */
 #define KVASER_PCIEFD_SRB_CTRL_DMA_ENABLE BIT(0)
 
@@ -1061,6 +1066,7 @@ static int kvaser_pciefd_setup_dma(struct kvaser_pciefd *pcie)
 {
 	int i;
 	u32 srb_status;
+	u32 srb_packet_count;
 	dma_addr_t dma_addr[KVASER_PCIEFD_DMA_COUNT];
 
 	/* Disable the DMA */
@@ -1088,6 +1094,15 @@ static int kvaser_pciefd_setup_dma(struct kvaser_pciefd *pcie)
 		  KVASER_PCIEFD_SRB_CMD_RDB1,
 		  pcie->reg_base + KVASER_PCIEFD_SRB_CMD_REG);
 
+	/* Empty Rx FIFO */
+	srb_packet_count = ioread32(pcie->reg_base + KVASER_PCIEFD_SRB_RX_NR_PACKETS_REG) &
+			   KVASER_PCIEFD_SRB_RX_NR_PACKETS_MASK;
+	while (srb_packet_count) {
+		/* Drop current packet in FIFO */
+		ioread32(pcie->reg_base + KVASER_PCIEFD_SRB_FIFO_LAST_REG);
+		srb_packet_count--;
+	}
+
 	srb_status = ioread32(pcie->reg_base + KVASER_PCIEFD_SRB_STAT_REG);
 	if (!(srb_status & KVASER_PCIEFD_SRB_STAT_DI)) {
 		dev_err(&pcie->pci->dev, "DMA not idle before enabling\n");