IB/hfi1: Check return values from PCI config API calls

Ensure that return values from kernel PCI config access
API calls in HFI driver are checked and react properly if
they are not expected (i.e. not successful).
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NBartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

drivers/infiniband/hw/hfi1/chip.c

@@ -13846,9 +13846,10 @@ static void init_sc2vl_tables(struct hfi1_devdata *dd)
  * a reset following the (possible) FLR in this routine.
  *
  */
-static void init_chip(struct hfi1_devdata *dd)
+static int init_chip(struct hfi1_devdata *dd)
 {
 	int i;
+	int ret = 0;
 
 	/*
 	 * Put the HFI CSRs in a known state.
@@ -13896,12 +13897,22 @@ static void init_chip(struct hfi1_devdata *dd)
 		pcie_flr(dd->pcidev);
 
 		/* restore command and BARs */
-		restore_pci_variables(dd);
+		ret = restore_pci_variables(dd);
+		if (ret) {
+			dd_dev_err(dd, "%s: Could not restore PCI variables\n",
+				   __func__);
+			return ret;
+		}
 
 		if (is_ax(dd)) {
 			dd_dev_info(dd, "Resetting CSRs with FLR\n");
 			pcie_flr(dd->pcidev);
-			restore_pci_variables(dd);
+			ret = restore_pci_variables(dd);
+			if (ret) {
+				dd_dev_err(dd, "%s: Could not restore PCI variables\n",
+					   __func__);
+				return ret;
+			}
 		}
 	} else {
 		dd_dev_info(dd, "Resetting CSRs with writes\n");
@@ -13929,6 +13940,7 @@ static void init_chip(struct hfi1_devdata *dd)
 	write_csr(dd, ASIC_QSFP1_OUT, 0x1f);
 	write_csr(dd, ASIC_QSFP2_OUT, 0x1f);
 	init_chip_resources(dd);
+	return ret;
 }
 
 static void init_early_variables(struct hfi1_devdata *dd)
@@ -14914,7 +14926,9 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
 		goto bail_cleanup;
 
 	/* obtain chip sizes, reset chip CSRs */
-	init_chip(dd);
+	ret = init_chip(dd);
+	if (ret)
+		goto bail_cleanup;
 
 	/* read in the PCIe link speed information */
 	ret = pcie_speeds(dd);

drivers/infiniband/hw/hfi1/hfi.h

@@ -1854,7 +1854,7 @@ int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev);
 void hfi1_pcie_ddcleanup(struct hfi1_devdata *);
 int pcie_speeds(struct hfi1_devdata *dd);
 int request_msix(struct hfi1_devdata *dd, u32 msireq);
-void restore_pci_variables(struct hfi1_devdata *dd);
+int restore_pci_variables(struct hfi1_devdata *dd);
 int do_pcie_gen3_transition(struct hfi1_devdata *dd);
 int parse_platform_config(struct hfi1_devdata *dd);
 int get_platform_config_field(struct hfi1_devdata *dd,

drivers/infiniband/hw/hfi1/pcie.c

@@ -68,7 +68,7 @@
 /*
  * Code to adjust PCIe capabilities.
  */
-static void tune_pcie_caps(struct hfi1_devdata *);
+static int tune_pcie_caps(struct hfi1_devdata *);
 
 /*
  * Do all the common PCIe setup and initialization.
@@ -161,6 +161,7 @@ int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev)
 {
 	unsigned long len;
 	resource_size_t addr;
+	int ret = 0;
 
 	dd->pcidev = pdev;
 	pci_set_drvdata(pdev, dd);
@@ -207,19 +208,56 @@ int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev)
 	/*
 	 * Save BARs and command to rewrite after device reset.
 	 */
-	pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, &dd->pcibar0);
-	pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, &dd->pcibar1);
-	pci_read_config_dword(dd->pcidev, PCI_ROM_ADDRESS, &dd->pci_rom);
-	pci_read_config_word(dd->pcidev, PCI_COMMAND, &dd->pci_command);
-	pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &dd->pcie_devctl);
-	pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL, &dd->pcie_lnkctl);
-	pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL2,
-				  &dd->pcie_devctl2);
-	pci_read_config_dword(dd->pcidev, PCI_CFG_MSIX0, &dd->pci_msix0);
-	pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, &dd->pci_lnkctl3);
-	pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, &dd->pci_tph2);
+
+	ret = pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, &dd->pcibar0);
+	if (ret)
+		goto read_error;
+
+	ret = pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, &dd->pcibar1);
+	if (ret)
+		goto read_error;
+
+	ret = pci_read_config_dword(dd->pcidev, PCI_ROM_ADDRESS, &dd->pci_rom);
+	if (ret)
+		goto read_error;
+
+	ret = pci_read_config_word(dd->pcidev, PCI_COMMAND, &dd->pci_command);
+	if (ret)
+		goto read_error;
+
+	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL,
+					&dd->pcie_devctl);
+	if (ret)
+		goto read_error;
+
+	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL,
+					&dd->pcie_lnkctl);
+	if (ret)
+		goto read_error;
+
+	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL2,
+					&dd->pcie_devctl2);
+	if (ret)
+		goto read_error;
+
+	ret = pci_read_config_dword(dd->pcidev, PCI_CFG_MSIX0, &dd->pci_msix0);
+	if (ret)
+		goto read_error;
+
+	ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE1,
+				    &dd->pci_lnkctl3);
+	if (ret)
+		goto read_error;
+
+	ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, &dd->pci_tph2);
+	if (ret)
+		goto read_error;
 
 	return 0;
+
+read_error:
+	dd_dev_err(dd, "Unable to read from PCI config\n");
+	return ret;
 }
 
 /*
@@ -270,8 +308,14 @@ static u32 extract_width(u16 linkstat)
 static void update_lbus_info(struct hfi1_devdata *dd)
 {
 	u16 linkstat;
+	int ret;
+
+	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
+	if (ret) {
+		dd_dev_err(dd, "Unable to read from PCI config\n");
+		return;
+	}
 
-	pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
 	dd->lbus_width = extract_width(linkstat);
 	dd->lbus_speed = extract_speed(linkstat);
 	snprintf(dd->lbus_info, sizeof(dd->lbus_info),
@@ -286,6 +330,7 @@ int pcie_speeds(struct hfi1_devdata *dd)
 {
 	u32 linkcap;
 	struct pci_dev *parent = dd->pcidev->bus->self;
+	int ret;
 
 	if (!pci_is_pcie(dd->pcidev)) {
 		dd_dev_err(dd, "Can't find PCI Express capability!\n");
@@ -295,7 +340,12 @@ int pcie_speeds(struct hfi1_devdata *dd)
 	/* find if our max speed is Gen3 and parent supports Gen3 speeds */
 	dd->link_gen3_capable = 1;
 
-	pcie_capability_read_dword(dd->pcidev, PCI_EXP_LNKCAP, &linkcap);
+	ret = pcie_capability_read_dword(dd->pcidev, PCI_EXP_LNKCAP, &linkcap);
+	if (ret) {
+		dd_dev_err(dd, "Unable to read from PCI config\n");
+		return ret;
+	}
+
 	if ((linkcap & PCI_EXP_LNKCAP_SLS) != GEN3_SPEED_VECTOR) {
 		dd_dev_info(dd,
 			    "This HFI is not Gen3 capable, max speed 0x%x, need 0x3\n",
@@ -327,7 +377,7 @@ int pcie_speeds(struct hfi1_devdata *dd)
  */
 int request_msix(struct hfi1_devdata *dd, u32 msireq)
 {
-	int nvec;
+	int nvec, ret;
 
 	nvec = pci_alloc_irq_vectors(dd->pcidev, 1, msireq,
 				     PCI_IRQ_MSIX | PCI_IRQ_LEGACY);
@@ -336,7 +386,12 @@ int request_msix(struct hfi1_devdata *dd, u32 msireq)
 		return nvec;
 	}
 
-	tune_pcie_caps(dd);
+	ret = tune_pcie_caps(dd);
+	if (ret) {
+		dd_dev_err(dd, "tune_pcie_caps() failed: %d\n", ret);
+		pci_free_irq_vectors(dd->pcidev);
+		return ret;
+	}
 
 	/* check for legacy IRQ */
 	if (nvec == 1 && !dd->pcidev->msix_enabled)
@@ -346,19 +401,61 @@ int request_msix(struct hfi1_devdata *dd, u32 msireq)
 }
 
 /* restore command and BARs after a reset has wiped them out */
-void restore_pci_variables(struct hfi1_devdata *dd)
+int restore_pci_variables(struct hfi1_devdata *dd)
 {
-	pci_write_config_word(dd->pcidev, PCI_COMMAND, dd->pci_command);
-	pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, dd->pcibar0);
-	pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, dd->pcibar1);
-	pci_write_config_dword(dd->pcidev, PCI_ROM_ADDRESS, dd->pci_rom);
-	pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL, dd->pcie_devctl);
-	pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL, dd->pcie_lnkctl);
-	pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL2,
-				   dd->pcie_devctl2);
-	pci_write_config_dword(dd->pcidev, PCI_CFG_MSIX0, dd->pci_msix0);
-	pci_write_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, dd->pci_lnkctl3);
-	pci_write_config_dword(dd->pcidev, PCIE_CFG_TPH2, dd->pci_tph2);
+	int ret = 0;
+
+	ret = pci_write_config_word(dd->pcidev, PCI_COMMAND, dd->pci_command);
+	if (ret)
+		goto error;
+
+	ret = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0,
+				     dd->pcibar0);
+	if (ret)
+		goto error;
+
+	ret = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1,
+				     dd->pcibar1);
+	if (ret)
+		goto error;
+
+	ret = pci_write_config_dword(dd->pcidev, PCI_ROM_ADDRESS, dd->pci_rom);
+	if (ret)
+		goto error;
+
+	ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL,
+					 dd->pcie_devctl);
+	if (ret)
+		goto error;
+
+	ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL,
+					 dd->pcie_lnkctl);
+	if (ret)
+		goto error;
+
+	ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL2,
+					 dd->pcie_devctl2);
+	if (ret)
+		goto error;
+
+	ret = pci_write_config_dword(dd->pcidev, PCI_CFG_MSIX0, dd->pci_msix0);
+	if (ret)
+		goto error;
+
+	ret = pci_write_config_dword(dd->pcidev, PCIE_CFG_SPCIE1,
+				     dd->pci_lnkctl3);
+	if (ret)
+		goto error;
+
+	ret = pci_write_config_dword(dd->pcidev, PCIE_CFG_TPH2, dd->pci_tph2);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	dd_dev_err(dd, "Unable to write to PCI config\n");
+	return ret;
 }
 
 /*
@@ -373,21 +470,33 @@ uint aspm_mode = ASPM_MODE_DISABLED;
 module_param_named(aspm, aspm_mode, uint, S_IRUGO);
 MODULE_PARM_DESC(aspm, "PCIe ASPM: 0: disable, 1: enable, 2: dynamic");
 
-static void tune_pcie_caps(struct hfi1_devdata *dd)
+static int tune_pcie_caps(struct hfi1_devdata *dd)
 {
 	struct pci_dev *parent;
 	u16 rc_mpss, rc_mps, ep_mpss, ep_mps;
 	u16 rc_mrrs, ep_mrrs, max_mrrs, ectl;
+	int ret;
 
 	/*
 	 * Turn on extended tags in DevCtl in case the BIOS has turned it off
 	 * to improve WFR SDMA bandwidth
 	 */
-	pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &ectl);
+	ret = pcie_capability_read_word(dd->pcidev,
+					PCI_EXP_DEVCTL, &ectl);
+	if (ret) {
+		dd_dev_err(dd, "Unable to read from PCI config\n");
+		return ret;
+	}
+
 	if (!(ectl & PCI_EXP_DEVCTL_EXT_TAG)) {
 		dd_dev_info(dd, "Enabling PCIe extended tags\n");
 		ectl |= PCI_EXP_DEVCTL_EXT_TAG;
-		pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL, ectl);
+		ret = pcie_capability_write_word(dd->pcidev,
+						 PCI_EXP_DEVCTL, ectl);
+		if (ret) {
+			dd_dev_err(dd, "Unable to write to PCI config\n");
+			return ret;
+		}
 	}
 	/* Find out supported and configured values for parent (root) */
 	parent = dd->pcidev->bus->self;
@@ -396,14 +505,14 @@ static void tune_pcie_caps(struct hfi1_devdata *dd)
 	 * access to the upstream component.
 	 */
 	if (!parent)
-		return;
+		return -EINVAL;
 	if (!pci_is_root_bus(parent->bus)) {
 		dd_dev_info(dd, "Parent not root\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (!pci_is_pcie(parent) || !pci_is_pcie(dd->pcidev))
-		return;
+		return -EINVAL;
 	rc_mpss = parent->pcie_mpss;
 	rc_mps = ffs(pcie_get_mps(parent)) - 8;
 	/* Find out supported and configured values for endpoint (us) */
@@ -449,6 +558,8 @@ static void tune_pcie_caps(struct hfi1_devdata *dd)
 		ep_mrrs = max_mrrs;
 		pcie_set_readrq(dd->pcidev, ep_mrrs);
 	}
+
+	return 0;
 }
 
 /* End of PCIe capability tuning */
@@ -680,6 +791,7 @@ static int load_eq_table(struct hfi1_devdata *dd, const u8 eq[11][3], u8 fs,
 	u32 violation;
 	u32 i;
 	u8 c_minus1, c0, c_plus1;
+	int ret;
 
 	for (i = 0; i < 11; i++) {
 		/* set index */
@@ -691,8 +803,14 @@ static int load_eq_table(struct hfi1_devdata *dd, const u8 eq[11][3], u8 fs,
 		pci_write_config_dword(pdev, PCIE_CFG_REG_PL102,
 				       eq_value(c_minus1, c0, c_plus1));
 		/* check if these coefficients violate EQ rules */
-		pci_read_config_dword(dd->pcidev, PCIE_CFG_REG_PL105,
-				      &violation);
+		ret = pci_read_config_dword(dd->pcidev,
+					    PCIE_CFG_REG_PL105, &violation);
+		if (ret) {
+			dd_dev_err(dd, "Unable to read from PCI config\n");
+			hit_error = 1;
+			break;
+		}
+
 		if (violation
 		    & PCIE_CFG_REG_PL105_GEN3_EQ_VIOLATE_COEF_RULES_SMASK){
 			if (hit_error == 0) {
@@ -1146,7 +1264,13 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 	 * that it is Gen3 capable earlier.
 	 */
 	dd_dev_info(dd, "%s: setting parent target link speed\n", __func__);
-	pcie_capability_read_word(parent, PCI_EXP_LNKCTL2, &lnkctl2);
+	ret = pcie_capability_read_word(parent, PCI_EXP_LNKCTL2, &lnkctl2);
+	if (ret) {
+		dd_dev_err(dd, "Unable to read from PCI config\n");
+		return_error = 1;
+		goto done;
+	}
+
 	dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
 		    (u32)lnkctl2);
 	/* only write to parent if target is not as high as ours */
@@ -1155,20 +1279,37 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 		lnkctl2 |= target_vector;
 		dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
 			    (u32)lnkctl2);
-		pcie_capability_write_word(parent, PCI_EXP_LNKCTL2, lnkctl2);
+		ret = pcie_capability_write_word(parent,
+						 PCI_EXP_LNKCTL2, lnkctl2);
+		if (ret) {
+			dd_dev_err(dd, "Unable to write to PCI config\n");
+			return_error = 1;
+			goto done;
+		}
 	} else {
 		dd_dev_info(dd, "%s: ..target speed is OK\n", __func__);
 	}
 
 	dd_dev_info(dd, "%s: setting target link speed\n", __func__);
-	pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
+	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
+	if (ret) {
+		dd_dev_err(dd, "Unable to read from PCI config\n");
+		return_error = 1;
+		goto done;
+	}
+
 	dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
 		    (u32)lnkctl2);
 	lnkctl2 &= ~LNKCTL2_TARGET_LINK_SPEED_MASK;
 	lnkctl2 |= target_vector;
 	dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
 		    (u32)lnkctl2);
-	pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
+	ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
+	if (ret) {
+		dd_dev_err(dd, "Unable to write to PCI config\n");
+		return_error = 1;
+		goto done;
+	}
 
 	/* step 5h: arm gasket logic */
 	/* hold DC in reset across the SBR */
@@ -1218,7 +1359,14 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 
 	/* restore PCI space registers we know were reset */
 	dd_dev_info(dd, "%s: calling restore_pci_variables\n", __func__);
-	restore_pci_variables(dd);
+	ret = restore_pci_variables(dd);
+	if (ret) {
+		dd_dev_err(dd, "%s: Could not restore PCI variables\n",
+			   __func__);
+		return_error = 1;
+		goto done;
+	}
+
 	/* restore firmware control */
 	write_csr(dd, MISC_CFG_FW_CTRL, fw_ctrl);
 
@@ -1248,7 +1396,13 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 	setextled(dd, 0);
 
 	/* check for any per-lane errors */
-	pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE2, &reg32);
+	ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE2, &reg32);
+	if (ret) {
+		dd_dev_err(dd, "Unable to read from PCI config\n");
+		return_error = 1;
+		goto done;
+	}
+
 	dd_dev_info(dd, "%s: per-lane errors: 0x%x\n", __func__, reg32);
 
 	/* extract status, look for our HFI */