TTY: automatically create nodes for some drivers

This looks like it was a mistake not to create device nodes for these
drivers. Let us create them from now on.

It will be necessary to call tty_register_device some way, either by
tty_register_driver implicitly or to call tty_register_device proper.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: netdev@vger.kernel.org
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/isdn/i4l/isdn_tty.c

@@ -1782,7 +1782,7 @@ isdn_tty_modem_init(void)
 	m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
 	m->tty_modem->init_termios = tty_std_termios;
 	m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	m->tty_modem->flags = TTY_DRIVER_REAL_RAW;
 	m->tty_modem->driver_name = "isdn_tty";
 	tty_set_operations(m->tty_modem, &modem_ops);
 	retval = tty_register_driver(m->tty_modem);

drivers/s390/char/tty3270.c

@@ -1781,7 +1781,7 @@ static int __init tty3270_init(void)
 	driver->type = TTY_DRIVER_TYPE_SYSTEM;
 	driver->subtype = SYSTEM_TYPE_TTY;
 	driver->init_termios = tty_std_termios;
-	driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_DYNAMIC_DEV;
+	driver->flags = TTY_DRIVER_RESET_TERMIOS;
 	tty_set_operations(driver, &tty3270_ops);
 	ret = tty_register_driver(driver);
 	if (ret) {

drivers/tty/serial/crisv10.c

@@ -4443,7 +4443,7 @@ static int __init rs_init(void)
 		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
 	driver->init_termios.c_ispeed = 115200;
 	driver->init_termios.c_ospeed = 115200;
-	driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	driver->flags = TTY_DRIVER_REAL_RAW;
 
 	tty_set_operations(driver, &rs_ops);
         serial_driver = driver;