Merge v5.8-rc6 into char-misc-next

We need the char/misc fixes in here as well.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

.gitignore

@@ -143,6 +143,9 @@ x509.genkey
 /allrandom.config
 /allyes.config
 
+# Kconfig savedefconfig output
+/defconfig
+
 # Kdevelop4
 *.kdev4
 

.mailmap

@@ -90,11 +90,16 @@ Frank Rowand <frowand.list@gmail.com> <frank.rowand@sonymobile.com>
 Frank Zago <fzago@systemfabricworks.com>
 Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
+Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
+Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
+Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@linux.vnet.ibm.com>
 Greg Kroah-Hartman <greg@echidna.(none)>
 Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
 Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>
+Heiko Carstens <hca@linux.ibm.com> <h.carstens@de.ibm.com>
+Heiko Carstens <hca@linux.ibm.com> <heiko.carstens@de.ibm.com>
 Henk Vergonet <Henk.Vergonet@gmail.com>
 Henrik Kretzschmar <henne@nachtwindheim.de>
 Henrik Rydberg <rydberg@bitmath.org>

Documentation/admin-guide/README.rst

@@ -258,7 +258,7 @@ Configuring the kernel
 Compiling the kernel
 --------------------
 
- - Make sure you have at least gcc 4.6 available.
+ - Make sure you have at least gcc 4.9 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
    Please note that you can still run a.out user programs with this kernel.

Documentation/arm64/cpu-feature-registers.rst

@@ -171,6 +171,7 @@ infrastructure:
 
 
   3) ID_AA64PFR1_EL1 - Processor Feature Register 1
+
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
      +------------------------------+---------+---------+
@@ -181,6 +182,7 @@ infrastructure:
 
 
   4) MIDR_EL1 - Main ID Register
+
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
      +------------------------------+---------+---------+

Documentation/arm64/silicon-errata.rst

@@ -147,6 +147,14 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1463225       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1418040       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1530923       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/block/bfq-iosched.rst

@@ -492,13 +492,6 @@ set max_budget to higher values than those to which BFQ would have set
 it with auto-tuning. An alternative way to achieve this goal is to
 just increase the value of timeout_sync, leaving max_budget equal to 0.
 
-weights
--------
-
-Read-only parameter, used to show the weights of the currently active
-BFQ queues.
-
-
 4. Group scheduling with BFQ
 ============================
 
@@ -566,7 +559,7 @@ Parameters to set
 For each group, there is only the following parameter to set.
 
 weight (namely blkio.bfq.weight or io.bfq-weight): the weight of the
-group inside its parent. Available values: 1..10000 (default 100). The
+group inside its parent. Available values: 1..1000 (default 100). The
 linear mapping between ioprio and weights, described at the beginning
 of the tunable section, is still valid, but all weights higher than
 IOPRIO_BE_NR*10 are mapped to ioprio 0.

Documentation/core-api/dma-api.rst

@@ -204,6 +204,14 @@ Returns the maximum size of a mapping for the device. The size parameter
 of the mapping functions like dma_map_single(), dma_map_page() and
 others should not be larger than the returned value.
 
+::
+
+	bool
+	dma_need_sync(struct device *dev, dma_addr_t dma_addr);
+
+Returns %true if dma_sync_single_for_{device,cpu} calls are required to
+transfer memory ownership.  Returns %false if those calls can be skipped.
+
 ::
 
 	unsigned long

Documentation/dev-tools/kunit/faq.rst

@@ -61,3 +61,43 @@ test, or an end-to-end test.
   kernel by installing a production configuration of the kernel on production
   hardware with a production userspace and then trying to exercise some behavior
   that depends on interactions between the hardware, the kernel, and userspace.
+
+KUnit isn't working, what should I do?
+======================================
+
+Unfortunately, there are a number of things which can break, but here are some
+things to try.
+
+1. Try running ``./tools/testing/kunit/kunit.py run`` with the ``--raw_output``
+   parameter. This might show details or error messages hidden by the kunit_tool
+   parser.
+2. Instead of running ``kunit.py run``, try running ``kunit.py config``,
+   ``kunit.py build``, and ``kunit.py exec`` independently. This can help track
+   down where an issue is occurring. (If you think the parser is at fault, you
+   can run it manually against stdin or a file with ``kunit.py parse``.)
+3. Running the UML kernel directly can often reveal issues or error messages
+   kunit_tool ignores. This should be as simple as running ``./vmlinux`` after
+   building the UML kernel (e.g., by using ``kunit.py build``). Note that UML
+   has some unusual requirements (such as the host having a tmpfs filesystem
+   mounted), and has had issues in the past when built statically and the host
+   has KASLR enabled. (On older host kernels, you may need to run ``setarch
+   `uname -m` -R ./vmlinux`` to disable KASLR.)
+4. Make sure the kernel .config has ``CONFIG_KUNIT=y`` and at least one test
+   (e.g. ``CONFIG_KUNIT_EXAMPLE_TEST=y``). kunit_tool will keep its .config
+   around, so you can see what config was used after running ``kunit.py run``.
+   It also preserves any config changes you might make, so you can
+   enable/disable things with ``make ARCH=um menuconfig`` or similar, and then
+   re-run kunit_tool.
+5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
+   may help clean up any residual config items which could be causing problems.
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+   built into any kernel, or can be built as a module and loaded at runtime.
+   Doing so should allow you to determine if UML is causing the issue you're
+   seeing. When tests are built-in, they will execute when the kernel boots, and
+   modules will automatically execute associated tests when loaded. Test results
+   can be collected from ``/sys/kernel/debug/kunit/<test suite>/results``, and
+   can be parsed with ``kunit.py parse``. For more details, see "KUnit on
+   non-UML architectures" in :doc:`usage`.
+
+If none of the above tricks help, you are always welcome to email any issues to
+kunit-dev@googlegroups.com.

Documentation/devicetree/bindings/Makefile

@@ -2,7 +2,6 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
-DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
 DT_SCHEMA_MIN_VERSION = 2020.5
 
@@ -35,21 +34,40 @@ quiet_cmd_mk_schema = SCHEMA  $@
 
 DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
-DT_SCHEMA_FILES ?= $(DT_DOCS)
-
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
-
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
-	-Wno-graph_child_address
+	-Wno-graph_child_address \
+	-Wno-interrupt_provider
 
 $(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
+ifeq ($(DT_SCHEMA_FILES),)
+
+# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
+# Just copy processed-schema-examples.yaml
+
+$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE
+	$(call if_changed,copy)
+
+DT_SCHEMA_FILES = $(DT_DOCS)
+
+else
+
+# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml
+
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
 $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-extra-y += processed-schema.yaml
+endif
+
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
+extra-$(CHECK_DTBS) += processed-schema.yaml
+
+# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
+# build artifacts here before they are processed by scripts/Makefile.clean
+clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
+			-name '*.example.dt.yaml' \) -delete 2>/dev/null)

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

@@ -47,7 +47,7 @@ Required properties:
 			  &lsio_mu1 1 2
 			  &lsio_mu1 1 3
 			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
 		for detailed mailbox binding.
 
 Note: Each mu which supports general interrupt should have an alias correctly

Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml

@@ -80,14 +80,14 @@ examples:
         ranges = <1 0x00000000 0x42000000 0x02000000>,
                  <5 0x00000000 0x46000000 0x01000000>;
 
-        ethernet@1,01f00000 {
+        ethernet@1,1f00000 {
             compatible = "smsc,lan9115";
             reg = <1 0x01f00000 0x1000>;
             interrupts = <0 48 4>;
             phy-mode = "mii";
         };
 
-        uart@5,00200000 {
+        serial@5,200000 {
             compatible = "ns16550a";
             reg = <5 0x00200000 0x20>;
             interrupts = <0 49 4>;

Documentation/devicetree/bindings/clock/imx27-clock.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX27
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock

Documentation/devicetree/bindings/clock/imx31-clock.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX31
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock

Documentation/devicetree/bindings/clock/imx5-clock.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX5
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock

Documentation/devicetree/bindings/display/bridge/sii902x.txt

@@ -37,7 +37,7 @@ Optional properties:
 	simple-card or audio-graph-card binding. See their binding
 	documents on how to describe the way the sii902x device is
 	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.txt
+	Documentation/devicetree/bindings/sound/simple-card.yaml
 	Documentation/devicetree/bindings/sound/audio-graph-card.txt
 	Note: In case of the audio-graph-card binding the used port
 	index should be 3.

Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt

@@ -68,7 +68,7 @@ Required properties:
   datasheet
 - clocks : phandle to the PRE axi clock input, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "axi"
 - interrupts: should contain the PRE interrupt
 - fsl,iram: phandle pointing to the mmio-sram device node, that should be
@@ -94,7 +94,7 @@ Required properties:
   datasheet
 - clocks : phandles to the PRG ipg and axi clock inputs, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "ipg" and "axi"
 - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
   PRE as the first entry and the muxable PREs following.

Documentation/devicetree/bindings/display/imx/ldb.txt

@@ -30,8 +30,8 @@ Required properties:
                 "di2_sel" - IPU2 DI0 mux
                 "di3_sel" - IPU2 DI1 mux
         The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 
 Optional properties:
  - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q

Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml

@@ -33,7 +33,7 @@ additionalProperties: false
 
 examples:
   - |
-    sysreg {
+    sysreg@0 {
         compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
         reg = <0x00000 0x1000>;
 

Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml

@@ -24,7 +24,7 @@ properties:
     description: |
       Should contain a list of phandles pointing to display interface port
       of vop devices. vop definitions as defined in
-      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
 
 required:
   - compatible

Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt

@@ -12,7 +12,7 @@ Required properties for the top level node:
    Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
 - #interrupt-cells : Specifies the number of cells needed to encode an
    interrupt. Should be 2. The first cell defines the interrupt number,
-   the second encodes the triger flags encoded as described in
+   the second encodes the trigger flags encoded as described in
    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - compatible:
   - "mediatek,mt7621-gpio" for Mediatek controllers

Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt

@@ -10,7 +10,7 @@ Interrupt number definition:
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
-Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
  IRQ_TYPE_LEVEL_HIGH (default)
  IRQ_TYPE_LEVEL_LOW
  IRQ_TYPE_EDGE_RISING

Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt

@@ -87,7 +87,7 @@ Example:
 		ranges;
 
 		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff90400 {
+		ipi_mailbox_rpu0: mailbox@ff990400 {
 			reg = <0xff990400 0x20>,
 			      <0xff990420 0x20>,
 			      <0xff990080 0x20>,

Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt

@@ -8,7 +8,7 @@ The embedded controller requires the SPI controller driver to signal readiness
 to receive a transfer (that is, when TX FIFO contains the response data) by
 strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
 SSP binding as documented in:
-<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
+<Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
 
 Example:
 	&ssp3 {

Documentation/devicetree/bindings/net/mediatek-bluetooth.txt

@@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices
 
 This device is a serial attached device to BTIF device and thus it must be a
 child node of the serial node with BTIF. The dt-bindings details for BTIF
-device can be known via Documentation/devicetree/bindings/serial/8250.txt.
+device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
 
 Required properties:
 

Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt

@@ -114,7 +114,7 @@ with values derived from the SoC user manual.
    [flags]>
 
 On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
 for documentation of the GPIO device tree bindings on those platforms.
 
 

Documentation/devicetree/bindings/sound/audio-graph-card.txt

@@ -5,7 +5,7 @@ It is based on common bindings for device graphs.
 see ${LINUX}/Documentation/devicetree/bindings/graph.txt
 
 Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
 
 Below are same as Simple-Card.
 

Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt

@@ -5,7 +5,7 @@ codec or external codecs.
 
 sti sound drivers allows to expose sti SoC audio interface through the
 generic ASoC simple card. For details about sound card declaration please refer to
-Documentation/devicetree/bindings/sound/simple-card.txt.
+Documentation/devicetree/bindings/sound/simple-card.yaml.
 
 1) sti-uniperiph-dai: audio dai device.
 ---------------------------------------

Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt

@@ -19,7 +19,7 @@ Required properties:
 
 SPI Controller nodes must be child of GENI based Qualcomm Universal
 Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
 
 SPI slave nodes must be children of the SPI master node and conform to SPI bus
 binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.

Documentation/devicetree/bindings/thermal/thermal-sensor.yaml

@@ -41,7 +41,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     // Example 1: SDM845 TSENS
-    soc: soc@0 {
+    soc: soc {
             #address-cells = <2>;
             #size-cells = <2>;
 

Documentation/devicetree/bindings/thermal/thermal-zones.yaml

@@ -224,7 +224,7 @@ examples:
     #include <dt-bindings/thermal/thermal.h>
 
     // Example 1: SDM845 TSENS
-    soc: soc@0 {
+    soc {
             #address-cells = <2>;
             #size-cells = <2>;
 

Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml

@@ -35,7 +35,7 @@ examples:
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
     vtm: thermal@42050000 {
         compatible = "ti,am654-vtm";
-        reg = <0x0 0x42050000 0x0 0x25c>;
+        reg = <0x42050000 0x25c>;
         power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
         #thermal-sensor-cells = <1>;
     };

Documentation/devicetree/bindings/timer/csky,mptimer.txt

@@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
  - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
  - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
  - PTIM_CCVR "cr<3, 14>" Current counter value reg.
- - PTIM_LVR  "cr<6, 14>" Window value reg to triger next event.
+ - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
 
 ==============================
 timer node bindings definition

Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml

@@ -127,8 +127,8 @@ examples:
                 #address-cells = <1>;
                 #size-cells = <0>;
 
-                string@0409 {
-                        reg = <0x0409>;
+                string@409 {
+                        reg = <0x409>;
                         manufacturer = "ASPEED";
                         product = "USB Virtual Hub";
                         serial-number = "0000";

Documentation/devicetree/writing-schema.rst

-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 Writing DeviceTree Bindings in json-schema
 ==========================================
@@ -124,9 +124,12 @@ dtc must also be built with YAML output support enabled. This requires that
 libyaml and its headers be installed on the host system. For some distributions
 that involves installing the development package, such as:
 
-Debian:
+Debian::
+
   apt-get install libyaml-dev
-Fedora:
+
+Fedora::
+
   dnf -y install libyaml-devel
 
 Running checks

Documentation/filesystems/overlayfs.rst

@@ -560,8 +560,8 @@ When the NFS export feature is enabled, all directory index entries are
 verified on mount time to check that upper file handles are not stale.
 This verification may cause significant overhead in some cases.
 
-Note: the mount options index=off,nfs_export=on are conflicting and will
-result in an error.
+Note: the mount options index=off,nfs_export=on are conflicting for a
+read-write mount and will result in an error.
 
 
 Testsuite

Documentation/i2c/slave-eeprom-backend.rst

 ==============================
-Linux I2C slave eeprom backend
+Linux I2C slave EEPROM backend
 ==============================
 
-by Wolfram Sang <wsa@sang-engineering.com> in 2014-15
+by Wolfram Sang <wsa@sang-engineering.com> in 2014-20
 
-This is a proof-of-concept backend which acts like an EEPROM on the connected
-I2C bus. The memory contents can be modified from userspace via this file
-located in sysfs::
+This backend simulates an EEPROM on the connected I2C bus. Its memory contents
+can be accessed from userspace via this file located in sysfs::
 
 	/sys/bus/i2c/devices/<device-directory>/slave-eeprom
 
+The following types are available: 24c02, 24c32, 24c64, and 24c512. Read-only
+variants are also supported. The name needed for instantiating has the form
+'slave-<type>[ro]'. Examples follow:
+
+24c02, read/write, address 0x64:
+  # echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device
+
+24c512, read-only, address 0x42:
+  # echo slave-24c512ro 0x1042 > /sys/bus/i2c/devices/i2c-1/new_device
+
+You can also preload data during boot if a device-property named
+'firmware-name' contains a valid filename (DT or ACPI only).
+
 As of 2015, Linux doesn't support poll on binary sysfs files, so there is no
 notification when another master changed the content.

Documentation/kbuild/modules.rst

@@ -182,7 +182,8 @@ module 8123.ko, which is built from the following files::
 	8123_pci.c
 	8123_bin.o_shipped	<= Binary blob
 
---- 3.1 Shared Makefile
+3.1 Shared Makefile
+-------------------
 
 	An external module always includes a wrapper makefile that
 	supports building the module using "make" with no arguments.
@@ -470,9 +471,9 @@ build.
 
 	The syntax of the Module.symvers file is::
 
-	<CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
+		<CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-	0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
+		0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
 	The fields are separated by tabs and values may be empty (e.g.
 	if no namespace is defined for an exported symbol).

Documentation/kbuild/reproducible-builds.rst

@@ -101,7 +101,7 @@ Structure randomisation
 
 If you enable ``CONFIG_GCC_PLUGIN_RANDSTRUCT``, you will need to
 pre-generate the random seed in
-``scripts/gcc-plgins/randomize_layout_seed.h`` so the same value
+``scripts/gcc-plugins/randomize_layout_seed.h`` so the same value
 is used in rebuilds.
 
 Debug info conflicts

Documentation/mips/ingenic-tcu.rst

@@ -68,4 +68,4 @@ and frameworks can be controlled from the same registers, all of these
 drivers access their registers through the same regmap.
 
 For more information regarding the devicetree bindings of the TCU drivers,
-have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.txt.
+have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.yaml.

Documentation/networking/arcnet.rst

@@ -434,7 +434,7 @@ can set up your network then:
 	ifconfig arc0 insight
 	route add insight arc0
 	route add freedom arc0	/* I would use the subnet here (like I said
-					to to in "single protocol" above),
+					to in "single protocol" above),
 					but the rest of the subnet
 					unfortunately lies across the PPP
 					link on freedom, which confuses

Documentation/networking/ax25.rst

@@ -6,7 +6,7 @@ AX.25
 
 To use the amateur radio protocols within Linux you will need to get a
 suitable copy of the AX.25 Utilities. More detailed information about
-AX.25, NET/ROM and ROSE, associated programs and and utilities can be
+AX.25, NET/ROM and ROSE, associated programs and utilities can be
 found on http://www.linux-ax25.org.
 
 There is an active mailing list for discussing Linux amateur radio matters

Documentation/networking/can_ucan_protocol.rst

@@ -144,7 +144,7 @@ UCAN_COMMAND_SET_BITTIMING
 
 *Host2Dev; mandatory*
 
-Setup bittiming by sending the the structure
+Setup bittiming by sending the structure
 ``ucan_ctl_payload_t.cmd_set_bittiming`` (see ``struct bittiming`` for
 details)
 
@@ -232,7 +232,7 @@ UCAN_IN_TX_COMPLETE
   zero
 
 The CAN device has sent a message to the CAN bus. It answers with a
-list of of tuples <echo-ids, flags>.
+list of tuples <echo-ids, flags>.
 
 The echo-id identifies the frame from (echos the id from a previous
 UCAN_OUT_TX message). The flag indicates the result of the

Documentation/networking/dsa/dsa.rst

@@ -95,7 +95,7 @@ Ethernet switch.
 Networking stack hooks
 ----------------------
 
-When a master netdev is used with DSA, a small hook is placed in in the
+When a master netdev is used with DSA, a small hook is placed in the
 networking stack is in order to have the DSA subsystem process the Ethernet
 switch specific tagging protocol. DSA accomplishes this by registering a
 specific (and fake) Ethernet type (later becoming ``skb->protocol``) with the

Documentation/networking/ip-sysctl.rst

@@ -741,7 +741,7 @@ tcp_fastopen - INTEGER
 
 	Default: 0x1
 
-	Note that that additional client or server features are only
+	Note that additional client or server features are only
 	effective if the basic support (0x1 and 0x2) are enabled respectively.
 
 tcp_fastopen_blackhole_timeout_sec - INTEGER

Documentation/networking/ipvs-sysctl.rst

@@ -114,7 +114,7 @@ drop_entry - INTEGER
 	modes (when there is no enough available memory, the strategy
 	is enabled and the variable is automatically set to 2,
 	otherwise the strategy is disabled and the variable is set to
-	1), and 3 means that that the strategy is always enabled.
+	1), and 3 means that the strategy is always enabled.
 
 drop_packet - INTEGER
 	- 0  - disabled (default)

Documentation/networking/rxrpc.rst

@@ -186,7 +186,7 @@ About the AF_RXRPC driver:
      time [tunable] after the last connection using it discarded, in case a new
      connection is made that could use it.
 
- (#) A client-side connection is only shared between calls if they have have
+ (#) A client-side connection is only shared between calls if they have
      the same key struct describing their security (and assuming the calls
      would otherwise share the connection).  Non-secured calls would also be
      able to share connections with each other.

Documentation/powerpc/vas-api.rst

@@ -213,7 +213,7 @@ request buffers are not in memory. The operating system handles the fault by
 updating CSB with the following data:
 
 	csb.flags = CSB_V;
-	csb.cc = CSB_CC_TRANSLATION;
+	csb.cc = CSB_CC_FAULT_ADDRESS;
 	csb.ce = CSB_CE_TERMINATION;
 	csb.address = fault_address;
 

Documentation/process/changes.rst

@@ -29,7 +29,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
         Program        Minimal version       Command to check the version
 ====================== ===============  ========================================
-GNU C                  4.8              gcc --version
+GNU C                  4.9              gcc --version
 GNU make               3.81             make --version
 binutils               2.23             ld -v
 flex                   2.5.35           flex --version

Documentation/process/coding-style.rst

@@ -319,6 +319,26 @@ If you are afraid to mix up your local variable names, you have another
 problem, which is called the function-growth-hormone-imbalance syndrome.
 See chapter 6 (Functions).
 
+For symbol names and documentation, avoid introducing new usage of
+'master / slave' (or 'slave' independent of 'master') and 'blacklist /
+whitelist'.
+
+Recommended replacements for 'master / slave' are:
+    '{primary,main} / {secondary,replica,subordinate}'
+    '{initiator,requester} / {target,responder}'
+    '{controller,host} / {device,worker,proxy}'
+    'leader / follower'
+    'director / performer'
+
+Recommended replacements for 'blacklist/whitelist' are:
+    'denylist / allowlist'
+    'blocklist / passlist'
+
+Exceptions for introducing new usage is to maintain a userspace ABI/API,
+or when updating code for an existing (as of 2020) hardware or protocol
+specification that mandates those terms. For new specifications
+translate specification usage of the terminology to the kernel coding
+standard where possible.
 
 5) Typedefs
 -----------

Documentation/virt/kvm/api.rst

@@ -4339,14 +4339,15 @@ Errors:
 #define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001
 
   struct kvm_vmx_nested_state_hdr {
-	__u32 flags;
 	__u64 vmxon_pa;
 	__u64 vmcs12_pa;
-	__u64 preemption_timer_deadline;
 
 	struct {
 		__u16 flags;
 	} smm;
+
+	__u32 flags;
+	__u64 preemption_timer_deadline;
   };
 
   struct kvm_vmx_nested_state_data {

MAINTAINERS

@@ -2931,6 +2931,7 @@ F:	include/uapi/linux/atm*
 
 ATMEL MACB ETHERNET DRIVER
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@microchip.com>
 S:	Supported
 F:	drivers/net/ethernet/cadence/
 
@@ -3308,7 +3309,7 @@ X:	arch/riscv/net/bpf_jit_comp32.c
 
 BPF JIT for S390
 M:	Ilya Leoshkevich <iii@linux.ibm.com>
-M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+M:	Heiko Carstens <hca@linux.ibm.com>
 M:	Vasily Gorbik <gor@linux.ibm.com>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
@@ -3948,7 +3949,7 @@ L:	linux-crypto@vger.kernel.org
 S:	Supported
 F:	drivers/char/hw_random/cctrng.c
 F:	drivers/char/hw_random/cctrng.h
-F:	Documentation/devicetree/bindings/rng/arm-cctrng.txt
+F:	Documentation/devicetree/bindings/rng/arm-cctrng.yaml
 W:	https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocell-700-family
 
 CEC FRAMEWORK
@@ -5023,7 +5024,6 @@ F:	drivers/mfd/da91??-*.c
 F:	drivers/pinctrl/pinctrl-da90??.c
 F:	drivers/power/supply/da9052-battery.c
 F:	drivers/power/supply/da91??-*.c
-F:	drivers/regulator/da903x.c
 F:	drivers/regulator/da9???-regulator.[ch]
 F:	drivers/regulator/slg51000-regulator.[ch]
 F:	drivers/rtc/rtc-da90??.c
@@ -5113,7 +5113,7 @@ M:	Vinod Koul <vkoul@kernel.org>
 L:	dmaengine@vger.kernel.org
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
-T:	git git://git.infradead.org/users/vkoul/slave-dma.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git
 F:	Documentation/devicetree/bindings/dma/
 F:	Documentation/driver-api/dmaengine/
 F:	drivers/dma/
@@ -5492,7 +5492,7 @@ F:	include/uapi/drm/r128_drm.h
 DRM DRIVER FOR RAYDIUM RM67191 PANELS
 M:	Robert Chiras <robert.chiras@nxp.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
+F:	Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
 F:	drivers/gpu/drm/panel/panel-raydium-rm67191.c
 
 DRM DRIVER FOR ROCKTECH JH057N00900 PANELS
@@ -14576,8 +14576,8 @@ RENESAS R-CAR THERMAL DRIVERS
 M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-F:	Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
-F:	Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+F:	Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+F:	Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
 F:	drivers/thermal/rcar_gen3_thermal.c
 F:	drivers/thermal/rcar_thermal.c
 
@@ -14833,7 +14833,7 @@ S:	Maintained
 F:	drivers/video/fbdev/savage/
 
 S390
-M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+M:	Heiko Carstens <hca@linux.ibm.com>
 M:	Vasily Gorbik <gor@linux.ibm.com>
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
 L:	linux-s390@vger.kernel.org
@@ -14864,7 +14864,7 @@ F:	drivers/s390/block/dasd*
 F:	include/linux/dasd_mod.h
 
 S390 IOMMU (PCI)
-M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
+M:	Gerald Schaefer <gerald.schaefer@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -14892,7 +14892,7 @@ F:	drivers/s390/net/
 
 S390 PCI SUBSYSTEM
 M:	Niklas Schnelle <schnelle@linux.ibm.com>
-M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
+M:	Gerald Schaefer <gerald.schaefer@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -17515,7 +17515,7 @@ F:	Documentation/admin-guide/ufs.rst
 F:	fs/ufs/
 
 UHID USERSPACE HID IO DRIVER
-M:	David Herrmann <dh.herrmann@googlemail.com>
+M:	David Rheinsberg <david.rheinsberg@gmail.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/uhid.c
@@ -18474,7 +18474,7 @@ S:	Maintained
 F:	drivers/rtc/rtc-sd3078.c
 
 WIIMOTE HID DRIVER
-M:	David Herrmann <dh.herrmann@googlemail.com>
+M:	David Rheinsberg <david.rheinsberg@gmail.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/hid-wiimote*

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*
@@ -970,8 +970,8 @@ LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr
 endif
 
 # Align the bit size of userspace programs with the kernel
-KBUILD_USERCFLAGS  += $(filter -m32 -m64, $(KBUILD_CFLAGS))
-KBUILD_USERLDFLAGS += $(filter -m32 -m64, $(KBUILD_CFLAGS))
+KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
+KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
 
 # make the checker run with the right architecture
 CHECKFLAGS += --arch=$(ARCH)

arch/arc/Kconfig

@@ -170,6 +170,15 @@ config ARC_CPU_HS
 
 endchoice
 
+config ARC_TUNE_MCPU
+	string "Override default -mcpu compiler flag"
+	default ""
+	help
+	  Override default -mcpu=xxx compiler flag (which is set depending on
+	  the ISA version) with the specified value.
+	  NOTE: If specified flag isn't supported by current compiler the
+	  ISA default value will be used as a fallback.
+
 config CPU_BIG_ENDIAN
 	bool "Enable Big Endian Mode"
 	help
@@ -465,6 +474,12 @@ config ARC_IRQ_NO_AUTOSAVE
 	  This is programmable and can be optionally disabled in which case
 	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
 
+config ARC_LPB_DISABLE
+	bool "Disable loop buffer (LPB)"
+	help
+	  On HS cores, loop buffer (LPB) is programmable in runtime and can
+	  be optionally disabled.
+
 endif # ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"

arch/arc/Makefile

@@ -10,8 +10,25 @@ CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
-cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
-cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38
+
+tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT)	:= -mcpu=arc700
+tune-mcpu-def-$(CONFIG_ISA_ARCV2)	:= -mcpu=hs38
+
+ifeq ($(CONFIG_ARC_TUNE_MCPU),"")
+cflags-y				+= $(tune-mcpu-def-y)
+else
+tune-mcpu				:= $(shell echo $(CONFIG_ARC_TUNE_MCPU))
+tune-mcpu-ok 				:= $(call cc-option-yn, $(tune-mcpu))
+ifeq ($(tune-mcpu-ok),y)
+cflags-y				+= $(tune-mcpu)
+else
+# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler
+# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option.
+$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)')
+cflags-y				+= $(tune-mcpu-def-y)
+endif
+endif
+
 
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register defintion, make sure it gets passed to every file

arch/arc/include/asm/elf.h

@@ -19,7 +19,7 @@
 #define  R_ARC_32_PCREL		0x31
 
 /*to set parameters in the core dumps */
-#define ELF_ARCH		EM_ARCOMPACT
+#define ELF_ARCH		EM_ARC_INUSE
 #define ELF_CLASS		ELFCLASS32
 
 #ifdef CONFIG_CPU_BIG_ENDIAN

arch/arc/include/asm/irqflags-compact.h

@@ -90,6 +90,9 @@ static inline void arch_local_irq_restore(unsigned long flags)
 /*
  * Unconditionally Enable IRQs
  */
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+extern void arch_local_irq_enable(void);
+#else
 static inline void arch_local_irq_enable(void)
 {
 	unsigned long temp;
@@ -102,7 +105,7 @@ static inline void arch_local_irq_enable(void)
 	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
 	: "cc", "memory");
 }
-
+#endif
 
 /*
  * Unconditionally Disable IRQs

arch/arc/kernel/entry.S

@@ -165,7 +165,6 @@ END(EV_Extension)
 tracesys:
 	; save EFA in case tracer wants the PC of traced task
 	; using ERET won't work since next-PC has already committed
-	lr  r12, [efa]
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
 	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
@@ -208,15 +207,9 @@ tracesys_exit:
 ; Breakpoint TRAP
 ; ---------------------------------------------
 trap_with_param:
-
-	; stop_pc info by gdb needs this info
-	lr  r0, [efa]
+	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
 	mov r1, sp
 
-	; Now that we have read EFA, it is safe to do "fake" rtie
-	;   and get out of CPU exception mode
-	FAKE_RET_FROM_EXCPN
-
 	; Save callee regs in case gdb wants to have a look
 	; SP will grow up by size of CALLEE Reg-File
 	; NOTE: clobbers r12
@@ -243,6 +236,10 @@ ENTRY(EV_Trap)
 
 	EXCEPTION_PROLOGUE
 
+	lr  r12, [efa]
+
+	FAKE_RET_FROM_EXCPN
+
 	;============ TRAP 1   :breakpoints
 	; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
 	bmsk.f 0, r10, 7
@@ -250,9 +247,6 @@ ENTRY(EV_Trap)
 
 	;============ TRAP  (no param): syscall top level
 
-	; First return from Exception to pure K mode (Exception/IRQs renabled)
-	FAKE_RET_FROM_EXCPN
-
 	; If syscall tracing ongoing, invoke pre-post-hooks
 	GET_CURR_THR_INFO_FLAGS   r10
 	btst r10, TIF_SYSCALL_TRACE

arch/arc/kernel/head.S

@@ -59,6 +59,14 @@
 	bclr	r5, r5, STATUS_AD_BIT
 #endif
 	kflag	r5
+
+#ifdef CONFIG_ARC_LPB_DISABLE
+	lr	r5, [ARC_REG_LPB_BUILD]
+	breq    r5, 0, 1f		; LPB doesn't exist
+	mov	r5, 1
+	sr	r5, [ARC_REG_LPB_CTRL]
+1:
+#endif /* CONFIG_ARC_LPB_DISABLE */
 #endif
 	; Config DSP_CTRL properly, so kernel may use integer multiply,
 	; multiply-accumulate, and divide operations

arch/arc/kernel/setup.c

@@ -58,10 +58,12 @@ static const struct id_to_str arc_legacy_rel[] = {
 	{ 0x00,		NULL   }
 };
 
-static const struct id_to_str arc_cpu_rel[] = {
+static const struct id_to_str arc_hs_ver54_rel[] = {
 	/* UARCH.MAJOR,	Release */
 	{  0,		"R3.10a"},
 	{  1,		"R3.50a"},
+	{  2,		"R3.60a"},
+	{  3,		"R4.00a"},
 	{  0xFF,	NULL   }
 };
 
@@ -117,12 +119,6 @@ static void decode_arc_core(struct cpuinfo_arc *cpu)
 	struct bcr_uarch_build_arcv2 uarch;
 	const struct id_to_str *tbl;
 
-	/*
-	 * Up until (including) the first core4 release (0x54) things were
-	 * simple: AUX IDENTITY.ARCVER was sufficient to identify arc family
-	 * and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue)
-	 */
-
 	if (cpu->core.family < 0x54) { /* includes arc700 */
 
 		for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
@@ -143,11 +139,10 @@ static void decode_arc_core(struct cpuinfo_arc *cpu)
 	}
 
 	/*
-	 * However the subsequent HS release (same 0x54) allow HS38 or HS48
-	 * configurations and encode this info in a different BCR.
-	 * The BCR was introduced in 0x54 so can't be read unconditionally.
+	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
+	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
+	 * releases only update it.
 	 */
-
 	READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
 
 	if (uarch.prod == 4) {
@@ -158,7 +153,7 @@ static void decode_arc_core(struct cpuinfo_arc *cpu)
 		cpu->name = "HS38";
 	}
 
-	for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) {
+	for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
 		if (uarch.maj == tbl->id) {
 			cpu->release = tbl->str;
 			break;

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1540,8 +1540,9 @@
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+			<&dcan0_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xcc000 0x2000>;
@@ -1549,6 +1550,8 @@
 			dcan0: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 0>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1560,8 +1563,9 @@
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+			<&dcan1_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xd0000 0x2000>;
@@ -1569,6 +1573,8 @@
 			dcan1: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-name = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";

arch/arm/boot/dts/imx6qdl-gw551x.dtsi

@@ -110,7 +110,7 @@
 		simple-audio-card,frame-master = <&sound_codec>;
 
 		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
+			sound-dai = <&ssi1>;
 		};
 
 		sound_codec: simple-audio-card,codec {

arch/arm/boot/dts/meson.dtsi

@@ -11,7 +11,7 @@
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	L2: l2-cache-controller@c4200000 {
+	L2: cache-controller@c4200000 {
 		compatible = "arm,pl310-cache";
 		reg = <0xc4200000 0x1000>;
 		cache-unified;

arch/arm/boot/dts/omap3-n900.dts

@@ -105,6 +105,14 @@
 			linux,code = <SW_FRONT_PROXIMITY>;
 			linux,can-disable;
 		};
+
+		machine_cover {
+			label = "Machine Cover";
+			gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+		};
 	};
 
 	isp1707: isp1707 {
@@ -819,10 +827,6 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
-	/* For debugging, it is often good idea to remove this GPIO.
-	   It means you can remove back cover (to reboot by removing
-	   battery) and still use the MMC card. */
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
 };
 
 /* most boards use vaux3, only some old versions use vmmc2 instead */

arch/arm/boot/dts/socfpga.dtsi

@@ -726,7 +726,7 @@
 			};
 		};
 
-		L2: l2-cache@fffef000 {
+		L2: cache-controller@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
 			interrupts = <0 38 0x04>;

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -636,7 +636,7 @@
 			reg = <0xffcfb100 0x80>;
 		};
 
-		L2: l2-cache@fffff000 {
+		L2: cache-controller@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/kernel/asm-offsets.c

@@ -31,15 +31,6 @@
 #if defined(__APCS_26__)
 #error Sorry, your compiler targets APCS-26 but this kernel requires APCS-32
 #endif
-/*
- * GCC 4.8.0-4.8.2: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854
- *	      miscompiles find_get_entry(), and can result in EXT3 and EXT4
- *	      filesystem corruption (possibly other FS too).
- */
-#if defined(GCC_VERSION) && GCC_VERSION >= 40800 && GCC_VERSION < 40803
-#error Your compiler is too buggy; it is known to miscompile kernels
-#error and result in filesystem corruption and oopses.
-#endif
 
 int main(void)
 {

arch/arm/mach-imx/devices/devices-common.h

@@ -289,6 +289,6 @@ struct platform_device *__init imx_add_spi_imx(
 		const struct spi_imx_master *pdata);
 
 struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
-					int irq, int irq_err);
+					int irq);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);

arch/arm/mach-imx/devices/platform-gpio-mxc.c

@@ -24,7 +24,8 @@ struct platform_device *__init mxc_register_gpio(char *name, int id,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
+	unsigned int nres;
 
-	return platform_device_register_resndata(&mxc_aips_bus,
-			name, id, res, ARRAY_SIZE(res), NULL, 0);
+	nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
+	return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
 }

arch/arm/mach-imx/devices/platform-imx-dma.c

@@ -6,7 +6,7 @@
 #include "devices-common.h"
 
 struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
-	resource_size_t iobase, int irq, int irq_err)
+	resource_size_t iobase, int irq)
 {
 	struct resource res[] = {
 		{
@@ -17,10 +17,6 @@ struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
 			.start = irq,
 			.end = irq,
 			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = irq_err,
-			.end = irq_err,
-			.flags = IORESOURCE_IRQ,
 		},
 	};
 

arch/arm/mach-imx/mm-imx21.c

@@ -78,8 +78,7 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 
 	pinctrl_provide_dummies();
-	imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR,
-			MX21_INT_DMACH0, 0); /* No ERR irq */
+	imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0);
 	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
 					ARRAY_SIZE(imx21_audmux_res));
 }

arch/arm/mach-imx/mm-imx27.c

@@ -79,8 +79,7 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 
 	pinctrl_provide_dummies();
-	imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR,
-			MX27_INT_DMACH0, 0); /* No ERR irq */
+	imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0);
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
 					ARRAY_SIZE(imx27_audmux_res));

arch/arm/mach-omap2/omap_hwmod.c

@@ -3435,7 +3435,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 		regs = ioremap(data->module_pa,
 			       data->module_size);
 		if (!regs)
-			return -ENOMEM;
+			goto out_free_sysc;
 	}
 
 	/*
@@ -3445,13 +3445,13 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	if (oh->class->name && strcmp(oh->class->name, data->name)) {
 		class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL);
 		if (!class)
-			return -ENOMEM;
+			goto out_unmap;
 	}
 
 	if (list_empty(&oh->slave_ports)) {
 		oi = kcalloc(1, sizeof(*oi), GFP_KERNEL);
 		if (!oi)
-			return -ENOMEM;
+			goto out_free_class;
 
 		/*
 		 * Note that we assume interconnect interface clocks will be
@@ -3478,6 +3478,14 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
+
+out_free_class:
+	kfree(class);
+out_unmap:
+	iounmap(regs);
+out_free_sysc:
+	kfree(sysc);
+	return -ENOMEM;
 }
 
 static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {

arch/arm/xen/enlighten.c

@@ -241,7 +241,6 @@ static int __init fdt_find_hyper_node(unsigned long node, const char *uname,
  * see Documentation/devicetree/bindings/arm/xen.txt for the
  * documentation of the Xen Device Tree format.
  */
-#define GRANT_TABLE_PHYSADDR 0
 void __init xen_early_init(void)
 {
 	of_scan_flat_dt(fdt_find_hyper_node, NULL);

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -77,7 +77,7 @@
 		method = "smc";
 	};
 
-	intc: intc@fffc1000 {
+	intc: interrupt-controller@fffc1000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -302,7 +302,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -445,7 +445,7 @@
 			clock-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 108 4>;
@@ -456,7 +456,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 109 4>;

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts

@@ -155,6 +155,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts

@@ -188,6 +188,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -211,12 +212,12 @@
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@4000000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};

arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts

@@ -10,7 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/meson-aiu.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",

arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";

arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&mali {
+	assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+			  <&clkc CLKID_MALI_0>,
+			  <&clkc CLKID_MALI>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_MALI_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>; /* Do Nothing */
+};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -337,6 +337,11 @@
 	};
 };
 
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
 &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };

arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts

@@ -98,6 +98,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm64/configs/defconfig

@@ -194,7 +194,7 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 CONFIG_PCI_AARDVARK=y
 CONFIG_PCI_TEGRA=y
-CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
 CONFIG_PCIE_ALTERA=y

arch/arm64/include/asm/alternative.h

@@ -73,11 +73,11 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 	".pushsection .altinstructions,\"a\"\n"				\
 	ALTINSTR_ENTRY(feature)						\
 	".popsection\n"							\
-	".pushsection .altinstr_replacement, \"a\"\n"			\
+	".subsection 1\n"						\
 	"663:\n\t"							\
 	newinstr "\n"							\
 	"664:\n\t"							\
-	".popsection\n\t"						\
+	".previous\n\t"							\
 	".org	. - (664b-663b) + (662b-661b)\n\t"			\
 	".org	. - (662b-661b) + (664b-663b)\n"			\
 	".endif\n"
@@ -117,9 +117,9 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 662:	.pushsection .altinstructions, "a"
 	altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f
 	.popsection
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 663:	\insn2
-664:	.popsection
+664:	.previous
 	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)
 	.endif
@@ -160,7 +160,7 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 	.pushsection .altinstructions, "a"
 	altinstruction_entry 663f, 661f, \cap, 664f-663f, 662f-661f
 	.popsection
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 	.align 2	/* So GAS knows label 661 is suitably aligned */
 661:
 .endm
@@ -179,9 +179,9 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 .macro alternative_else
 662:
 	.if .Lasm_alt_mode==0
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 	.else
-	.popsection
+	.previous
 	.endif
 663:
 .endm
@@ -192,7 +192,7 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 .macro alternative_endif
 664:
 	.if .Lasm_alt_mode==0
-	.popsection
+	.previous
 	.endif
 	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)

arch/arm64/include/asm/arch_gicv3.h

@@ -109,7 +109,7 @@ static inline u32 gic_read_pmr(void)
 	return read_sysreg_s(SYS_ICC_PMR_EL1);
 }
 
-static inline void gic_write_pmr(u32 val)
+static __always_inline void gic_write_pmr(u32 val)
 {
 	write_sysreg_s(val, SYS_ICC_PMR_EL1);
 }

arch/arm64/include/asm/arch_timer.h

@@ -58,6 +58,7 @@ struct arch_timer_erratum_workaround {
 	u64 (*read_cntvct_el0)(void);
 	int (*set_next_event_phys)(unsigned long, struct clock_event_device *);
 	int (*set_next_event_virt)(unsigned long, struct clock_event_device *);
+	bool disable_compat_vdso;
 };
 
 DECLARE_PER_CPU(const struct arch_timer_erratum_workaround *,

arch/arm64/include/asm/cpufeature.h

@@ -675,7 +675,7 @@ static inline bool system_supports_generic_auth(void)
 		cpus_have_const_cap(ARM64_HAS_GENERIC_AUTH);
 }
 
-static inline bool system_uses_irq_prio_masking(void)
+static __always_inline bool system_uses_irq_prio_masking(void)
 {
 	return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) &&
 	       cpus_have_const_cap(ARM64_HAS_IRQ_PRIO_MASKING);

arch/arm64/include/asm/cputype.h

@@ -86,6 +86,7 @@
 #define QCOM_CPU_PART_FALKOR		0xC00
 #define QCOM_CPU_PART_KRYO		0x200
 #define QCOM_CPU_PART_KRYO_3XX_SILVER	0x803
+#define QCOM_CPU_PART_KRYO_4XX_GOLD	0x804
 #define QCOM_CPU_PART_KRYO_4XX_SILVER	0x805
 
 #define NVIDIA_CPU_PART_DENVER		0x003
@@ -114,6 +115,7 @@
 #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
 #define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
 #define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER)
+#define MIDR_QCOM_KRYO_4XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_GOLD)
 #define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER)
 #define MIDR_NVIDIA_DENVER MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_DENVER)
 #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)

arch/arm64/include/asm/debug-monitors.h

@@ -109,6 +109,8 @@ void disable_debug_monitors(enum dbg_active_el el);
 
 void user_rewind_single_step(struct task_struct *task);
 void user_fastforward_single_step(struct task_struct *task);
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task);
 
 void kernel_enable_single_step(struct pt_regs *regs);
 void kernel_disable_single_step(void);

arch/arm64/include/asm/pgtable-prot.h

@@ -67,7 +67,7 @@ extern bool arm64_use_ng_mappings;
 #define PAGE_HYP		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_HYP_XN)
 #define PAGE_HYP_EXEC		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY)
 #define PAGE_HYP_RO		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY | PTE_HYP_XN)
-#define PAGE_HYP_DEVICE		__pgprot(PROT_DEVICE_nGnRE | PTE_HYP)
+#define PAGE_HYP_DEVICE		__pgprot(_PROT_DEFAULT | PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_HYP | PTE_HYP_XN)
 
 #define PAGE_S2_MEMATTR(attr)						\
 	({								\

arch/arm64/include/asm/syscall.h

@@ -34,6 +34,10 @@ static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
 	unsigned long error = regs->regs[0];
+
+	if (is_compat_thread(task_thread_info(task)))
+		error = sign_extend64(error, 31);
+
 	return IS_ERR_VALUE(error) ? error : 0;
 }
 
@@ -47,7 +51,13 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	regs->regs[0] = (long) error ? error : val;
+	if (error)
+		val = error;
+
+	if (is_compat_thread(task_thread_info(task)))
+		val = lower_32_bits(val);
+
+	regs->regs[0] = val;
 }
 
 #define SYSCALL_MAX_ARGS 6

arch/arm64/include/asm/thread_info.h

@@ -93,6 +93,7 @@ void arch_release_task_struct(struct task_struct *tsk);
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_FSCHECK		(1 << TIF_FSCHECK)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 #define _TIF_SVE		(1 << TIF_SVE)
 

arch/arm64/include/asm/vdso/clocksource.h

@@ -2,7 +2,10 @@
 #ifndef __ASM_VDSOCLOCKSOURCE_H
 #define __ASM_VDSOCLOCKSOURCE_H
 
-#define VDSO_ARCH_CLOCKMODES	\
-	VDSO_CLOCKMODE_ARCHTIMER
+#define VDSO_ARCH_CLOCKMODES					\
+	/* vdso clocksource for both 32 and 64bit tasks */	\
+	VDSO_CLOCKMODE_ARCHTIMER,				\
+	/* vdso clocksource for 64bit tasks only */		\
+	VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT
 
 #endif

arch/arm64/include/asm/vdso/compat_gettimeofday.h

@@ -111,7 +111,7 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
 	 * update. Return something. Core will do another round and then
 	 * see the mode change and fallback to the syscall.
 	 */
-	if (clock_mode == VDSO_CLOCKMODE_NONE)
+	if (clock_mode != VDSO_CLOCKMODE_ARCHTIMER)
 		return 0;
 
 	/*
@@ -152,6 +152,12 @@ static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
 	return ret;
 }
 
+static inline bool vdso_clocksource_ok(const struct vdso_data *vd)
+{
+	return vd->clock_mode == VDSO_CLOCKMODE_ARCHTIMER;
+}
+#define vdso_clocksource_ok	vdso_clocksource_ok
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */

arch/arm64/kernel/alternative.c

@@ -43,20 +43,8 @@ bool alternative_is_applied(u16 cpufeature)
  */
 static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 {
-	unsigned long replptr;
-
-	if (kernel_text_address(pc))
-		return true;
-
-	replptr = (unsigned long)ALT_REPL_PTR(alt);
-	if (pc >= replptr && pc <= (replptr + alt->alt_len))
-		return false;
-
-	/*
-	 * Branching into *another* alternate sequence is doomed, and
-	 * we're not even trying to fix it up.
-	 */
-	BUG();
+	unsigned long replptr = (unsigned long)ALT_REPL_PTR(alt);
+	return !(pc >= replptr && pc <= (replptr + alt->alt_len));
 }
 
 #define align_down(x, a)	((unsigned long)(x) & ~(((unsigned long)(a)) - 1))

arch/arm64/kernel/cpu_errata.c

@@ -472,12 +472,7 @@ static bool
 has_cortex_a76_erratum_1463225(const struct arm64_cpu_capabilities *entry,
 			       int scope)
 {
-	u32 midr = read_cpuid_id();
-	/* Cortex-A76 r0p0 - r3p1 */
-	struct midr_range range = MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1);
-
-	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
-	return is_midr_in_range(midr, &range) && is_kernel_in_hyp_mode();
+	return is_affected_midr_range_list(entry, scope) && is_kernel_in_hyp_mode();
 }
 #endif
 
@@ -728,6 +723,8 @@ static const struct midr_range erratum_1418040_list[] = {
 	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1),
 	/* Neoverse-N1 r0p0 to r3p1 */
 	MIDR_RANGE(MIDR_NEOVERSE_N1, 0, 0, 3, 1),
+	/* Kryo4xx Gold (rcpe to rfpf) => (r0p0 to r3p1) */
+	MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xf),
 	{},
 };
 #endif
@@ -772,11 +769,23 @@ static const struct midr_range erratum_speculative_at_list[] = {
 #ifdef CONFIG_ARM64_ERRATUM_1530923
 	/* Cortex A55 r0p0 to r2p0 */
 	MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 2, 0),
+	/* Kryo4xx Silver (rdpe => r1p0) */
+	MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe),
 #endif
 	{},
 };
 #endif
 
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+static const struct midr_range erratum_1463225[] = {
+	/* Cortex-A76 r0p0 - r3p1 */
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1),
+	/* Kryo4xx Gold (rcpe to rfpf) => (r0p0 to r3p1) */
+	MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xf),
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -916,6 +925,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.capability = ARM64_WORKAROUND_1463225,
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = has_cortex_a76_erratum_1463225,
+		.midr_range_list = erratum_1463225,
 	},
 #endif
 #ifdef CONFIG_CAVIUM_TX2_ERRATUM_219

arch/arm64/kernel/cpufeature.c

@@ -1408,6 +1408,8 @@ static bool cpu_has_broken_dbm(void)
 	static const struct midr_range cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_1024718
 		MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 1, 0),  // A55 r0p0 -r1p0
+		/* Kryo4xx Silver (rdpe => r1p0) */
+		MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe),
 #endif
 		{},
 	};

arch/arm64/kernel/debug-monitors.c

@@ -141,17 +141,20 @@ postcore_initcall(debug_monitors_init);
 /*
  * Single step API and exception handling.
  */
-static void set_regs_spsr_ss(struct pt_regs *regs)
+static void set_user_regs_spsr_ss(struct user_pt_regs *regs)
 {
 	regs->pstate |= DBG_SPSR_SS;
 }
-NOKPROBE_SYMBOL(set_regs_spsr_ss);
+NOKPROBE_SYMBOL(set_user_regs_spsr_ss);
 
-static void clear_regs_spsr_ss(struct pt_regs *regs)
+static void clear_user_regs_spsr_ss(struct user_pt_regs *regs)
 {
 	regs->pstate &= ~DBG_SPSR_SS;
 }
-NOKPROBE_SYMBOL(clear_regs_spsr_ss);
+NOKPROBE_SYMBOL(clear_user_regs_spsr_ss);
+
+#define set_regs_spsr_ss(r)	set_user_regs_spsr_ss(&(r)->user_regs)
+#define clear_regs_spsr_ss(r)	clear_user_regs_spsr_ss(&(r)->user_regs)
 
 static DEFINE_SPINLOCK(debug_hook_lock);
 static LIST_HEAD(user_step_hook);
@@ -391,17 +394,26 @@ void user_rewind_single_step(struct task_struct *task)
 	 * If single step is active for this thread, then set SPSR.SS
 	 * to 1 to avoid returning to the active-pending state.
 	 */
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		set_regs_spsr_ss(task_pt_regs(task));
 }
 NOKPROBE_SYMBOL(user_rewind_single_step);
 
 void user_fastforward_single_step(struct task_struct *task)
 {
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		clear_regs_spsr_ss(task_pt_regs(task));
 }
 
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task)
+{
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
+		set_user_regs_spsr_ss(regs);
+	else
+		clear_user_regs_spsr_ss(regs);
+}
+
 /* Kernel API */
 void kernel_enable_single_step(struct pt_regs *regs)
 {

arch/arm64/kernel/entry-common.c

@@ -57,7 +57,7 @@ static void notrace el1_dbg(struct pt_regs *regs, unsigned long esr)
 	/*
 	 * The CPU masked interrupts, and we are leaving them masked during
 	 * do_debug_exception(). Update PMR as if we had called
-	 * local_mask_daif().
+	 * local_daif_mask().
 	 */
 	if (system_uses_irq_prio_masking())
 		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);

arch/arm64/kernel/entry.S

@@ -126,8 +126,10 @@ alternative_else_nop_endif
 	add	\dst, \dst, #(\sym - .entry.tramp.text)
 	.endm
 
-	// This macro corrupts x0-x3. It is the caller's duty
-	// to save/restore them if required.
+	/*
+	 * This macro corrupts x0-x3. It is the caller's duty  to save/restore
+	 * them if required.
+	 */
 	.macro	apply_ssbd, state, tmp1, tmp2
 #ifdef CONFIG_ARM64_SSBD
 alternative_cb	arm64_enable_wa2_handling
@@ -167,13 +169,28 @@ alternative_cb_end
 	stp	x28, x29, [sp, #16 * 14]
 
 	.if	\el == 0
+	.if	\regsize == 32
+	/*
+	 * If we're returning from a 32-bit task on a system affected by
+	 * 1418040 then re-enable userspace access to the virtual counter.
+	 */
+#ifdef CONFIG_ARM64_ERRATUM_1418040
+alternative_if ARM64_WORKAROUND_1418040
+	mrs	x0, cntkctl_el1
+	orr	x0, x0, #2	// ARCH_TIMER_USR_VCT_ACCESS_EN
+	msr	cntkctl_el1, x0
+alternative_else_nop_endif
+#endif
+	.endif
 	clear_gp_regs
 	mrs	x21, sp_el0
 	ldr_this_cpu	tsk, __entry_task, x20
 	msr	sp_el0, tsk
 
-	// Ensure MDSCR_EL1.SS is clear, since we can unmask debug exceptions
-	// when scheduling.
+	/*
+	 * Ensure MDSCR_EL1.SS is clear, since we can unmask debug exceptions
+	 * when scheduling.
+	 */
 	ldr	x19, [tsk, #TSK_TI_FLAGS]
 	disable_step_tsk x19, x20
 
@@ -320,6 +337,14 @@ alternative_else_nop_endif
 	tst	x22, #PSR_MODE32_BIT		// native task?
 	b.eq	3f
 
+#ifdef CONFIG_ARM64_ERRATUM_1418040
+alternative_if ARM64_WORKAROUND_1418040
+	mrs	x0, cntkctl_el1
+	bic	x0, x0, #2			// ARCH_TIMER_USR_VCT_ACCESS_EN
+	msr	cntkctl_el1, x0
+alternative_else_nop_endif
+#endif
+
 #ifdef CONFIG_ARM64_ERRATUM_845719
 alternative_if ARM64_WORKAROUND_845719
 #ifdef CONFIG_PID_IN_CONTEXTIDR
@@ -331,21 +356,6 @@ alternative_if ARM64_WORKAROUND_845719
 alternative_else_nop_endif
 #endif
 3:
-#ifdef CONFIG_ARM64_ERRATUM_1418040
-alternative_if_not ARM64_WORKAROUND_1418040
-	b	4f
-alternative_else_nop_endif
-	/*
-	 * if (x22.mode32 == cntkctl_el1.el0vcten)
-	 *     cntkctl_el1.el0vcten = ~cntkctl_el1.el0vcten
-	 */
-	mrs	x1, cntkctl_el1
-	eon	x0, x1, x22, lsr #3
-	tbz	x0, #1, 4f
-	eor	x1, x1, #2	// ARCH_TIMER_USR_VCT_ACCESS_EN
-	msr	cntkctl_el1, x1
-4:
-#endif
 	scs_save tsk, x0
 
 	/* No kernel C function calls after this as user keys are set. */
@@ -377,11 +387,11 @@ alternative_else_nop_endif
 	.if	\el == 0
 alternative_insn eret, nop, ARM64_UNMAP_KERNEL_AT_EL0
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-	bne	5f
+	bne	4f
 	msr	far_el1, x30
 	tramp_alias	x30, tramp_exit_native
 	br	x30
-5:
+4:
 	tramp_alias	x30, tramp_exit_compat
 	br	x30
 #endif

arch/arm64/kernel/kgdb.c

@@ -252,7 +252,7 @@ static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
 	if (!kgdb_single_step)
 		return DBG_HOOK_ERROR;
 
-	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 	return DBG_HOOK_HANDLED;
 }
 NOKPROBE_SYMBOL(kgdb_step_brk_fn);