提交 c4cecc19 编写于 作者: K Kenji Kaneshige 提交者: Greg Kroah-Hartman

[PATCH] shpchp: Cleanup interrupt handler

This patch cleans up the interrupt handler of shpchp driver. This
patch has no functional changes.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 d4fbf600
......@@ -90,6 +90,12 @@
#define MRLSENSOR 0x40000000
#define ATTN_BUTTON 0x80000000
/*
* Interrupt Locator Register definitions
*/
#define CMD_INTR_PENDING (1 << 0)
#define SLOT_INTR_PENDING(i) (1 << (i + 1))
/*
* Controller SERR-INT Register
*/
......@@ -218,7 +224,7 @@ static spinlock_t list_lock;
static atomic_t shpchp_num_controllers = ATOMIC_INIT(0);
static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs);
static irqreturn_t shpc_isr(int irq, void *dev_id, struct pt_regs *regs);
static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds);
static int hpc_check_cmd_status(struct controller *ctrl);
......@@ -279,7 +285,7 @@ static void int_poll_timeout(unsigned long lphp_ctlr)
}
/* Poll for interrupt events. regs == NULL => polling */
shpc_isr( 0, (void *)php_ctlr, NULL );
shpc_isr(0, php_ctlr->callback_instance_id, NULL );
init_timer(&php_ctlr->int_poll_timer);
if (!shpchp_poll_time)
......@@ -875,103 +881,86 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
return retval;
}
static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
static irqreturn_t shpc_isr(int irq, void *dev_id, struct pt_regs *regs)
{
struct controller *ctrl = NULL;
struct php_ctlr_state_s *php_ctlr;
u8 schedule_flag = 0;
u32 temp_dword, intr_loc, intr_loc2;
struct controller *ctrl = (struct controller *)dev_id;
struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
u32 serr_int, slot_reg, intr_loc, intr_loc2;
int hp_slot;
if (!dev_id)
return IRQ_NONE;
if (!shpchp_poll_mode) {
ctrl = (struct controller *)dev_id;
php_ctlr = ctrl->hpc_ctlr_handle;
} else {
php_ctlr = (struct php_ctlr_state_s *) dev_id;
ctrl = (struct controller *)php_ctlr->callback_instance_id;
}
if (!ctrl)
return IRQ_NONE;
if (!php_ctlr || !php_ctlr->creg)
return IRQ_NONE;
/* Check to see if it was our interrupt */
intr_loc = shpc_readl(ctrl, INTR_LOC);
if (!intr_loc)
return IRQ_NONE;
dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
if(!shpchp_poll_mode) {
/* Mask Global Interrupt Mask - see implementation note on p. 139 */
/* of SHPC spec rev 1.0*/
temp_dword = shpc_readl(ctrl, SERR_INTR_ENABLE);
temp_dword |= GLOBAL_INTR_MASK;
temp_dword &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, temp_dword);
/*
* Mask Global Interrupt Mask - see implementation
* note on p. 139 of SHPC spec rev 1.0
*/
serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
serr_int |= GLOBAL_INTR_MASK;
serr_int &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
intr_loc2 = shpc_readl(ctrl, INTR_LOC);
dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
}
if (intr_loc & 0x0001) {
if (intr_loc & CMD_INTR_PENDING) {
/*
* Command Complete Interrupt Pending
* RO only - clear by writing 1 to the Command Completion
* Detect bit in Controller SERR-INT register
*/
temp_dword = shpc_readl(ctrl, SERR_INTR_ENABLE);
temp_dword &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, temp_dword);
serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
serr_int &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
ctrl->cmd_busy = 0;
wake_up_interruptible(&ctrl->queue);
}
if ((intr_loc = (intr_loc >> 1)) == 0)
if (!(intr_loc & ~CMD_INTR_PENDING))
goto out;
for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
/* To find out which slot has interrupt pending */
if ((intr_loc >> hp_slot) & 0x01) {
temp_dword = shpc_readl(ctrl, SLOT_REG(hp_slot));
dbg("%s: Slot %x with intr, slot register = %x\n",
__FUNCTION__, hp_slot, temp_dword);
if ((php_ctlr->switch_change_callback) &&
(temp_dword & MRL_CHANGE_DETECTED))
schedule_flag += php_ctlr->switch_change_callback(
hp_slot, php_ctlr->callback_instance_id);
if ((php_ctlr->attention_button_callback) &&
(temp_dword & BUTTON_PRESS_DETECTED))
schedule_flag += php_ctlr->attention_button_callback(
hp_slot, php_ctlr->callback_instance_id);
if ((php_ctlr->presence_change_callback) &&
(temp_dword & PRSNT_CHANGE_DETECTED))
schedule_flag += php_ctlr->presence_change_callback(
hp_slot , php_ctlr->callback_instance_id);
if ((php_ctlr->power_fault_callback) &&
(temp_dword & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED)))
schedule_flag += php_ctlr->power_fault_callback(
hp_slot, php_ctlr->callback_instance_id);
/* Clear all slot events */
temp_dword &= ~SLOT_REG_RSVDZ_MASK;
shpc_writel(ctrl, SLOT_REG(hp_slot), temp_dword);
intr_loc2 = shpc_readl(ctrl, INTR_LOC);
dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
}
/* To find out which slot has interrupt pending */
if (!(intr_loc & SLOT_INTR_PENDING(hp_slot)))
continue;
slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
dbg("%s: Slot %x with intr, slot register = %x\n",
__FUNCTION__, hp_slot, slot_reg);
if (slot_reg & MRL_CHANGE_DETECTED)
php_ctlr->switch_change_callback(
hp_slot, php_ctlr->callback_instance_id);
if (slot_reg & BUTTON_PRESS_DETECTED)
php_ctlr->attention_button_callback(
hp_slot, php_ctlr->callback_instance_id);
if (slot_reg & PRSNT_CHANGE_DETECTED)
php_ctlr->presence_change_callback(
hp_slot , php_ctlr->callback_instance_id);
if (slot_reg & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED))
php_ctlr->power_fault_callback(
hp_slot, php_ctlr->callback_instance_id);
/* Clear all slot events */
slot_reg &= ~SLOT_REG_RSVDZ_MASK;
shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
}
out:
if (!shpchp_poll_mode) {
/* Unmask Global Interrupt Mask */
temp_dword = shpc_readl(ctrl, SERR_INTR_ENABLE);
temp_dword &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK);
shpc_writel(ctrl, SERR_INTR_ENABLE, temp_dword);
serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK);
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
}
return IRQ_HANDLED;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册