Skip to content

K
Kernel

openeuler / Kernel
12 个月 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 c48cbba6 编写于 作者: A Amit Daniel Kachhap 提交者： Zhang Rui
浏览文件
操作

hwmon: exynos4: move thermal sensor driver to driver/thermal directory 

This movement is needed because the hwmon entries and corresponding sysfs
interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c.  The goal is to place it in thermal folder
and add necessary functions to use the in-kernel thermal interfaces.
Signed-off-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: SangWook Ju <sw.ju@samsung.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
上级 02361418
隐藏空白更改
内联 并排
Showing with 19 addition and 156 deletion
Documentation/hwmon/exynos4_tmu → Documentation/thermal/exynos_thermal
浏览文件 @ c48cbba6
......@@ -46,36 +46,7 @@ The threshold levels are defined as follows:
The threshold and each trigger_level are set
through the corresponding registers.
When an interrupt occurs, this driver notify user space of
one of four threshold levels for the interrupt
through kobject_uevent_env and sysfs_notify functions.
When an interrupt occurs, this driver notify kernel thermal framework
with the function exynos4_report_trigger.
Although an interrupt condition for level_0 can be set,
it is not notified to user space through sysfs_notify function.
Sysfs Interface
---------------
name name of the temperature sensor
RO
temp1_input temperature
RO
temp1_max temperature for level_1 interrupt
RO
temp1_crit temperature for level_2 interrupt
RO
temp1_emergency temperature for level_3 interrupt
RO
temp1_max_alarm alarm for level_1 interrupt
RO
temp1_crit_alarm
alarm for level_2 interrupt
RO
temp1_emergency_alarm
alarm for level_3 interrupt
RO
it can be used to synchronize the cooling action.
drivers/hwmon/Kconfig
浏览文件 @ c48cbba6
......@@ -324,16 +324,6 @@ config SENSORS_DA9052_ADC
This driver can also be built as module. If so, the module
will be called da9052-hwmon.
config SENSORS_EXYNOS4_TMU
tristate "Temperature sensor on Samsung EXYNOS4"
depends on ARCH_EXYNOS4
help
If you say yes here you get support for TMU (Thermal Management
Unit) on SAMSUNG EXYNOS4 series of SoC.
This driver can also be built as a module. If so, the module
will be called exynos4-tmu.
config SENSORS_I5K_AMB
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on PCI && EXPERIMENTAL
......
drivers/hwmon/Makefile
浏览文件 @ c48cbba6
......@@ -49,7 +49,6 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
obj-$(CONFIG_SENSORS_EMC6W201) += emc6w201.o
obj-$(CONFIG_SENSORS_EXYNOS4_TMU) += exynos4_tmu.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
......
drivers/thermal/Kconfig
浏览文件 @ c48cbba6
......@@ -46,3 +46,10 @@ config RCAR_THERMAL
help
Enable this to plug the R-Car thermal sensor driver into the Linux
thermal framework
config EXYNOS_THERMAL
tristate "Temperature sensor on Samsung EXYNOS"
depends on ARCH_EXYNOS4 && THERMAL
help
If you say yes here you get support for TMU (Thermal Managment
Unit) on SAMSUNG EXYNOS series of SoC.
drivers/thermal/Makefile
浏览文件 @ c48cbba6
......@@ -6,3 +6,4 @@ obj-$(CONFIG_THERMAL) += thermal_sys.o
obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
drivers/hwmon/exynos4_tmu.c → drivers/thermal/exynos_thermal.c
浏览文件 @ c48cbba6
/*
* exynos4_tmu.c - Samsung EXYNOS4 TMU (Thermal Management Unit)
* exynos_thermal.c - Samsung EXYNOS TMU (Thermal Management Unit)
*
* Copyright (C) 2011 Samsung Electronics
* Donggeun Kim <dg77.kim@samsung.com>
* Amit Daniel Kachhap <amit.kachhap@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -33,10 +34,7 @@
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/platform_data/exynos4_tmu.h>
#include <linux/platform_data/exynos_thermal.h>
#define EXYNOS4_TMU_REG_TRIMINFO 0x0
#define EXYNOS4_TMU_REG_CONTROL 0x20
......@@ -70,7 +68,6 @@
struct exynos4_tmu_data {
struct exynos4_tmu_platform_data *pdata;
struct device *hwmon_dev;
struct resource *mem;
void __iomem *base;
int irq;
......@@ -246,8 +243,6 @@ static void exynos4_tmu_work(struct work_struct *work)
writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR);
kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE);
enable_irq(data->irq);
clk_disable(data->clk);
......@@ -264,87 +259,6 @@ static irqreturn_t exynos4_tmu_irq(int irq, void *id)
return IRQ_HANDLED;
}
static ssize_t exynos4_tmu_show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "exynos4-tmu\n");
}
static ssize_t exynos4_tmu_show_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct exynos4_tmu_data *data = dev_get_drvdata(dev);
int ret;
ret = exynos4_tmu_read(data);
if (ret < 0)
return ret;
/* convert from degree Celsius to millidegree Celsius */
return sprintf(buf, "%d\n", ret * 1000);
}
static ssize_t exynos4_tmu_show_alarm(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct exynos4_tmu_data *data = dev_get_drvdata(dev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
int temp;
unsigned int trigger_level;
temp = exynos4_tmu_read(data);
if (temp < 0)
return temp;
trigger_level = pdata->threshold + pdata->trigger_levels[attr->index];
return sprintf(buf, "%d\n", !!(temp > trigger_level));
}
static ssize_t exynos4_tmu_show_level(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct exynos4_tmu_data *data = dev_get_drvdata(dev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
unsigned int temp = pdata->threshold +
pdata->trigger_levels[attr->index];
return sprintf(buf, "%u\n", temp * 1000);
}
static DEVICE_ATTR(name, S_IRUGO, exynos4_tmu_show_name, NULL);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, exynos4_tmu_show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
exynos4_tmu_show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
exynos4_tmu_show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO,
exynos4_tmu_show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, exynos4_tmu_show_level, NULL, 1);
static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, exynos4_tmu_show_level, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_emergency, S_IRUGO,
exynos4_tmu_show_level, NULL, 3);
static struct attribute *exynos4_tmu_attributes[] = {
&dev_attr_name.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_emergency.dev_attr.attr,
NULL,
};
static const struct attribute_group exynos4_tmu_attr_group = {
.attrs = exynos4_tmu_attributes,
};
static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
{
struct exynos4_tmu_data *data;
......@@ -418,25 +332,9 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
goto err_clk;
}
ret = sysfs_create_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
if (ret) {
dev_err(&pdev->dev, "Failed to create sysfs group\n");
goto err_clk;
}
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
dev_err(&pdev->dev, "Failed to register hwmon device\n");
goto err_create_group;
}
exynos4_tmu_control(pdev, true);
return 0;
err_create_group:
sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
err_clk:
platform_set_drvdata(pdev, NULL);
clk_put(data->clk);
......@@ -458,9 +356,6 @@ static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
exynos4_tmu_control(pdev, false);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
clk_put(data->clk);
free_irq(data->irq, data);
......@@ -495,7 +390,7 @@ static int exynos4_tmu_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(exynos4_tmu_pm,
exynos4_tmu_suspend, exynos4_tmu_resume);
#define EXYNOS4_TMU_PM &exynos4_tmu_pm
#define EXYNOS4_TMU_PM (&exynos4_tmu_pm)
#else
#define EXYNOS4_TMU_PM NULL
#endif
......
include/linux/platform_data/exynos4_tmu.h → include/linux/platform_data/exynos_thermal.h
浏览文件 @ c48cbba6
/*
* exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
* exynos_thermal.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
*
* Copyright (C) 2011 Samsung Electronics
* Donggeun Kim <dg77.kim@samsung.com>
......@@ -19,8 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _LINUX_EXYNOS4_TMU_H
#define _LINUX_EXYNOS4_TMU_H
#ifndef _LINUX_EXYNOS_THERMAL_H
#define _LINUX_EXYNOS_THERMAL_H
enum calibration_type {
TYPE_ONE_POINT_TRIMMING,
......@@ -80,4 +80,4 @@ struct exynos4_tmu_platform_data {
enum calibration_type cal_type;
};
#endif /* _LINUX_EXYNOS4_TMU_H */
#endif /* _LINUX_EXYNOS_THERMAL_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或