提交 c46f0917 编写于 作者: D Damien Le Moal 提交者: Martin K. Petersen

scsi: sd: Check for unaligned partial completion

Commit <f2e767bb> ("mpt3sas: Force request partial completion
alignment") was not considering the case of commands not operating on
logical block size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned
partial replies). In this case, forcing alignment of resid to the device
logical block size can break the command result, e.g. in the case of
REQ_OP_ZONE_REPORT, the exact number of zone reported by the device.

Move the partial completion alignement check of mpt3sas to a generic
implementation in sd_done(). The check is added within the default
section of the initial req_op() switch case so that the report and reset
zone commands are ignored. In addition, as sd_done() is not called for
passthrough requests, resid corrections are not done as intended by the
initial mpt3sas patch.

Fixes: f2e767bb ("mpt3sas: Force request partial completion alignment")
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
上级 a4b0e8a4
...@@ -4677,7 +4677,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) ...@@ -4677,7 +4677,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
struct MPT3SAS_DEVICE *sas_device_priv_data; struct MPT3SAS_DEVICE *sas_device_priv_data;
u32 response_code = 0; u32 response_code = 0;
unsigned long flags; unsigned long flags;
unsigned int sector_sz;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
...@@ -4742,20 +4741,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) ...@@ -4742,20 +4741,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
} }
xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
/* In case of bogus fw or device, we could end up having
* unaligned partial completion. We can force alignment here,
* then scsi-ml does not need to handle this misbehavior.
*/
sector_sz = scmd->device->sector_size;
if (unlikely(!blk_rq_is_passthrough(scmd->request) && sector_sz &&
xfer_cnt % sector_sz)) {
sdev_printk(KERN_INFO, scmd->device,
"unaligned partial completion avoided (xfer_cnt=%u, sector_sz=%u)\n",
xfer_cnt, sector_sz);
xfer_cnt = round_down(xfer_cnt, sector_sz);
}
scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
log_info = le32_to_cpu(mpi_reply->IOCLogInfo); log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
......
...@@ -1783,6 +1783,8 @@ static int sd_done(struct scsi_cmnd *SCpnt) ...@@ -1783,6 +1783,8 @@ static int sd_done(struct scsi_cmnd *SCpnt)
{ {
int result = SCpnt->result; int result = SCpnt->result;
unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
unsigned int sector_size = SCpnt->device->sector_size;
unsigned int resid;
struct scsi_sense_hdr sshdr; struct scsi_sense_hdr sshdr;
struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk); struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
struct request *req = SCpnt->request; struct request *req = SCpnt->request;
...@@ -1813,6 +1815,21 @@ static int sd_done(struct scsi_cmnd *SCpnt) ...@@ -1813,6 +1815,21 @@ static int sd_done(struct scsi_cmnd *SCpnt)
scsi_set_resid(SCpnt, blk_rq_bytes(req)); scsi_set_resid(SCpnt, blk_rq_bytes(req));
} }
break; break;
default:
/*
* In case of bogus fw or device, we could end up having
* an unaligned partial completion. Check this here and force
* alignment.
*/
resid = scsi_get_resid(SCpnt);
if (resid & (sector_size - 1)) {
sd_printk(KERN_INFO, sdkp,
"Unaligned partial completion (resid=%u, sector_sz=%u)\n",
resid, sector_size);
resid = min(scsi_bufflen(SCpnt),
round_up(resid, sector_size));
scsi_set_resid(SCpnt, resid);
}
} }
if (result) { if (result) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册