提交 c433eb70 编写于 作者: L Linus Torvalds

Merge tag 'pinctrl-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Three small pin control fixes for the v4.10 series. Very little to say
  about them, just driver fixes.

   - one fix to the AMD pinctrl ACPI glue

   - fix requests on the Meson driver

   - fix bitfield widths on Samsungs Exynos 5433"

* tag 'pinctrl-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433
  pinctrl: meson: fix gpio request disabling other modes
  pinctrl/amd: Set the level based on ACPI tables
......@@ -212,7 +212,7 @@ static int meson_pmx_request_gpio(struct pinctrl_dev *pcdev,
{
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
meson_pmx_disable_other_groups(pc, range->pin_base + offset, -1);
meson_pmx_disable_other_groups(pc, offset, -1);
return 0;
}
......
......@@ -382,26 +382,21 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
int ret = 0;
u32 pin_reg;
unsigned long flags;
bool level_trig;
u32 active_level;
unsigned long flags, irq_flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
/*
* When level_trig is set EDGE and active_level is set HIGH in BIOS
* default settings, ignore incoming settings from client and use
* BIOS settings to configure GPIO register.
/* Ignore the settings coming from the client and
* read the values from the ACPI tables
* while setting the trigger type
*/
level_trig = !(pin_reg & (LEVEL_TRIGGER << LEVEL_TRIG_OFF));
active_level = pin_reg & (ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
if(level_trig &&
((active_level >> ACTIVE_LEVEL_OFF) == ACTIVE_HIGH))
type = IRQ_TYPE_EDGE_FALLING;
irq_flags = irq_get_trigger_type(d->irq);
if (irq_flags != IRQ_TYPE_NONE)
type = irq_flags;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
......
......@@ -56,6 +56,17 @@ static const struct samsung_pin_bank_type bank_type_alive = {
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
};
/* Exynos5433 has the 4bit widths for PINCFG_TYPE_DRV bitfields. */
static const struct samsung_pin_bank_type exynos5433_bank_type_off = {
.fld_width = { 4, 1, 2, 4, 2, 2, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
};
static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
.fld_width = { 4, 1, 2, 4, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
};
static void exynos_irq_mask(struct irq_data *irqd)
{
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
......@@ -1335,82 +1346,82 @@ const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = {
/* pin banks of exynos5433 pin-controller - ALIVE */
static const struct samsung_pin_bank_data exynos5433_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
EXYNOS5433_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
EXYNOS5433_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
EXYNOS5433_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
EXYNOS5433_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
EXYNOS5433_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
EXYNOS5433_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
};
/* pin banks of exynos5433 pin-controller - AUD */
static const struct samsung_pin_bank_data exynos5433_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
EXYNOS5433_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
EXYNOS5433_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
};
/* pin banks of exynos5433 pin-controller - CPIF */
static const struct samsung_pin_bank_data exynos5433_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00),
EXYNOS5433_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00),
};
/* pin banks of exynos5433 pin-controller - eSE */
static const struct samsung_pin_bank_data exynos5433_pin_banks3[] = {
EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00),
EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00),
};
/* pin banks of exynos5433 pin-controller - FINGER */
static const struct samsung_pin_bank_data exynos5433_pin_banks4[] = {
EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00),
EXYNOS5433_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00),
};
/* pin banks of exynos5433 pin-controller - FSYS */
static const struct samsung_pin_bank_data exynos5433_pin_banks5[] = {
EXYNOS_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00),
EXYNOS_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04),
EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr1", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpr2", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpr3", 0x14),
EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00),
EXYNOS5433_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04),
EXYNOS5433_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08),
EXYNOS5433_PIN_BANK_EINTG(8, 0x060, "gpr1", 0x0c),
EXYNOS5433_PIN_BANK_EINTG(2, 0x080, "gpr2", 0x10),
EXYNOS5433_PIN_BANK_EINTG(8, 0x0a0, "gpr3", 0x14),
};
/* pin banks of exynos5433 pin-controller - IMEM */
static const struct samsung_pin_bank_data exynos5433_pin_banks6[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
EXYNOS5433_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
};
/* pin banks of exynos5433 pin-controller - NFC */
static const struct samsung_pin_bank_data exynos5433_pin_banks7[] = {
EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
};
/* pin banks of exynos5433 pin-controller - PERIC */
static const struct samsung_pin_bank_data exynos5433_pin_banks8[] = {
EXYNOS_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00),
EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08),
EXYNOS_PIN_BANK_EINTG(2, 0x060, "gpc1", 0x0c),
EXYNOS_PIN_BANK_EINTG(6, 0x080, "gpc2", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpc3", 0x14),
EXYNOS_PIN_BANK_EINTG(2, 0x0c0, "gpg0", 0x18),
EXYNOS_PIN_BANK_EINTG(4, 0x0e0, "gpd0", 0x1c),
EXYNOS_PIN_BANK_EINTG(6, 0x100, "gpd1", 0x20),
EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpd2", 0x24),
EXYNOS_PIN_BANK_EINTG(5, 0x140, "gpd4", 0x28),
EXYNOS_PIN_BANK_EINTG(2, 0x160, "gpd8", 0x2c),
EXYNOS_PIN_BANK_EINTG(7, 0x180, "gpd6", 0x30),
EXYNOS_PIN_BANK_EINTG(3, 0x1a0, "gpd7", 0x34),
EXYNOS_PIN_BANK_EINTG(5, 0x1c0, "gpg1", 0x38),
EXYNOS_PIN_BANK_EINTG(2, 0x1e0, "gpg2", 0x3c),
EXYNOS_PIN_BANK_EINTG(8, 0x200, "gpg3", 0x40),
EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00),
EXYNOS5433_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04),
EXYNOS5433_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08),
EXYNOS5433_PIN_BANK_EINTG(2, 0x060, "gpc1", 0x0c),
EXYNOS5433_PIN_BANK_EINTG(6, 0x080, "gpc2", 0x10),
EXYNOS5433_PIN_BANK_EINTG(8, 0x0a0, "gpc3", 0x14),
EXYNOS5433_PIN_BANK_EINTG(2, 0x0c0, "gpg0", 0x18),
EXYNOS5433_PIN_BANK_EINTG(4, 0x0e0, "gpd0", 0x1c),
EXYNOS5433_PIN_BANK_EINTG(6, 0x100, "gpd1", 0x20),
EXYNOS5433_PIN_BANK_EINTG(8, 0x120, "gpd2", 0x24),
EXYNOS5433_PIN_BANK_EINTG(5, 0x140, "gpd4", 0x28),
EXYNOS5433_PIN_BANK_EINTG(2, 0x160, "gpd8", 0x2c),
EXYNOS5433_PIN_BANK_EINTG(7, 0x180, "gpd6", 0x30),
EXYNOS5433_PIN_BANK_EINTG(3, 0x1a0, "gpd7", 0x34),
EXYNOS5433_PIN_BANK_EINTG(5, 0x1c0, "gpg1", 0x38),
EXYNOS5433_PIN_BANK_EINTG(2, 0x1e0, "gpg2", 0x3c),
EXYNOS5433_PIN_BANK_EINTG(8, 0x200, "gpg3", 0x40),
};
/* pin banks of exynos5433 pin-controller - TOUCH */
static const struct samsung_pin_bank_data exynos5433_pin_banks9[] = {
EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
};
/*
......
......@@ -90,6 +90,37 @@
.pctl_res_idx = pctl_idx, \
} \
#define EXYNOS5433_PIN_BANK_EINTG(pins, reg, id, offs) \
{ \
.type = &exynos5433_bank_type_off, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_GPIO, \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS5433_PIN_BANK_EINTW(pins, reg, id, offs) \
{ \
.type = &exynos5433_bank_type_alive, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_WKUP, \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS5433_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
{ \
.type = &exynos5433_bank_type_alive, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_WKUP, \
.eint_offset = offs, \
.name = id, \
.pctl_res_idx = pctl_idx, \
} \
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册