[MIPS] Ocelot 3: Fix build errors after the recent move of Marvell headers.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/momentum/ocelot_3/setup.c

@@ -329,22 +329,22 @@ void __init plat_setup(void)
 	/* shut down ethernet ports, just to be sure our memory doesn't get
 	 * corrupted by random ethernet traffic.
 	 */
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
 	do {}
-	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
-		 MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
-		 MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
+		 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
+		 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
 
 	/* Turn off the Bit-Error LED */
 	OCELOT_FPGA_WRITE(0x80, CLR);