usb: chipidea: disable all interrupts and clear all interrupts status

During the initialization, it needs to disable all interrupts
enable bit as well as clear all interrupts status bits to avoid
exceptional interrupt.
Tested-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/chipidea/core.c

@@ -199,6 +199,12 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 	if (ci->hw_ep_max > ENDPT_MAX)
 		return -ENODEV;
 
+	/* Disable all interrupts bits */
+	hw_write(ci, OP_USBINTR, 0xffffffff, 0);
+
+	/* Clear all interrupts status bits*/
+	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
+
 	dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
 		ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 
@@ -434,8 +440,11 @@ static void ci_get_otg_capable(struct ci_hdrc *ci)
 		ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
 				DCCPARAMS_DC | DCCPARAMS_HC)
 					== (DCCPARAMS_DC | DCCPARAMS_HC));
-	if (ci->is_otg)
+	if (ci->is_otg) {
 		dev_dbg(ci->dev, "It is OTG capable controller\n");
+		ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
+		ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
+	}
 }
 
 static int ci_hdrc_probe(struct platform_device *pdev)